Mining Technician Work Summary

Part 1: Summary of the work of the technicians in the coal mining area in the first half of the year

After serving as a technician in the third district of coal mining, the comrades worked hard and strived for excellence. In the management of technical data in charge, he actively studied business knowledge, mastered new technologies, and prepared corresponding regulations and measures for the site to guide the construction of on-site operators. Provided many valuable coal mining technical materials for our mine, which has played an active role in promoting the safe production of the unit. The main achievements are as follows: the coal mining face improves the recovery rate of the iron shed at both ends, and it is under the mining of mine 3501. When stratified working face, affected by the mining of working face, the deformation of the two road supports is serious, the difficulty of withdrawing the iron shed is large, and the safety factor is low. Through technological innovation, the way of replacing the iron shed is improved, which reduces the labor intensity of employees and enhances the The safety of the work was retraced, the recovery rate of the iron shed was improved, the input cost of the iron shed was reduced, and the recovery rate of the iron shed was increased from 96.8% to 100%, which eliminated the waste. Large dip angle coal mining provides special operating procedures and safety technical measures to ensure safe production. The 3411 working face is the largest dip working face of coal seams since the mine was built. The maximum dip angle of the coal seam is 45 degrees, and the maximum digging of the working face is the largest. The angle reaches 28 degrees, the personnel are difficult to walk, the safety is not guaranteed, and the work efficiency is low. Through the work practice, safety technical measures are formulated, the angle of the working face is adjusted, the angle of the working face is reduced, the safety block is set, and the pillars are all The reins are prevented from falling, and the safety facilities such as the platform are retracted, which reduces the emphasis on employee labor, improves work efficiency, and ensures safety, so that the large dip working face can be safely and efficiently mined.

First, the first half of the work

1. Procedures and Measures: In the first half of the year, a total of two operating procedures, “10 outside the coal pillar i” and “7107 working surface”, and 30 safety technical measures were prepared, and the employees were informed and tested in time.

2. Safety education:

1 In accordance with the professional safety technology training plan for coal mining, the staff will be trained in safety knowledge education on Tuesday and Friday before and after class.

2 In accordance with the requirements of the Mine Safety Training Section, the staff of the whole district conducted a “daily one-question” study and actively participated in various safety training examinations of the mine organization, and obtained a “safety training red flag unit title”.

3. District team management: As a member of the team team, they have fulfilled their duties and participated in the management of the team. They actively promoted the rationalization suggestions to the district team in terms of safety technology, and opened the pre-class and post-class meetings. The district committee's various resolutions were earnestly implemented, and the team team was actively maintained.

Second, there are problems in the first half of the year

1. In terms of procedures and measures:

1 There are procedures for the preparation of measures that are not timely, and the quality is not high. The phenomenon that the quality of the main leaders of the mines has been signed outside the working hours has affected the leadership break and delayed the production of the team.

2 When learning to communicate the procedures and measures, the individual employees who did not go to work when the attendance was abnormal and did not go to work in a unified manner, there was a phenomenon that only told the employees what to do, so that the employees signed, and the contents of the procedures and measures could not be seriously conveyed in time.

3 When there is a change in the work surface, it is impossible to prepare targeted measures in a timely manner. There are phenomena such as dragging and loosening to allow the superior leaders to arrange and supervise the preparation of measures.

2. In terms of safety education and training:

1 There are employees who are low in individual culture and have poor comprehension. They cannot be patiently and meticulously educated and trained.

2 The existence of technical learning management is loose, not strict, resulting in the phenomenon that individual employees do not participate in learning or come early and leave early. For the team leaders of individual teams, they are not allowed to participate in technical learning.

3. In the management of the district team:

First, there is a lack of management and refinement, and there are good people's ideas. The general violations on the scene cannot be stopped in time.

Second, some weak people in the district team could not track and help in time.

Third, there is a phenomenon in which when the conditions on the site are poor and changes occur, there is a complaint of grievances and distress.

Third, the work plan for the second half of the year

In response to some problems in the first half of the year, I am determined to do the following work in the second half of the year:

First, earnestly study the technical business knowledge and combine the knowledge and practice to improve their business level.

Second, efforts should be made to grasp the technical business knowledge training so that every employee can master the basic technical business knowledge.

Thirdly, the procedures and measures are prepared in time according to the on-site changes of the work surface, and the contents of the measures are timely communicated to each employee.

Fourth, do a good job in on-site safety hazard investigation and formal operation of employees, report major safety hazards to the mine leaders in a timely manner, and use the time before and after the class to explain the hazards of illegal operations and potential safety hazards and how to prevent and deal with them. .

The fifth is to work hard to improve the management level, to start a good class before and after the class, and to do a good job from strictness.

Sixth, strictly abide by the rules and regulations of the mine, strictly implement the good duty system and abide by the labor discipline. In recent years, coal mine accidents have occurred throughout the country, causing huge losses to the people's lives and national property. He Xiqing is well aware of the importance of safety in coal mine production. Therefore, he always puts safety at the top of his work in his work.

First of all, every Tuesday, he organizes technical studies on time. Every time, he carefully and carefully explains the safety priorities and difficulties for employees to improve the safety and operation level of employees, and at the same time patiently do the ideological work of employees to improve the safety awareness of employees. In order to improve the enthusiasm of employees, He Xiqing has developed a learning incentive system, rewards learning, rewards education and punishment, and uses economic leverage to promote employees' active learning of business theory and operational technology knowledge, and improve the formality of employees. Operating level.

Secondly, He Xiqing often went down to familiarize himself with the scene. Every time he goes to the well, he must put safety and production focus on the book and set production measures on the spot. When arranging work, he told the employees in detail of the work production focus and safety focus, and set safe construction measures, and designated safety leaders to ensure safe production. The work arranged by Comrade He Xiqing basically eliminated the mistakes.

The comrades are dedicated to their work, study science and technology, study their business hard, constantly improve their own business level, solve a lot of technical problems for on-site production, and do a safe production for Taoyang Mine.

A big contribution has been made. The main work performance is as follows: In the actual work, according to the situation on the spot, the corresponding procedures and measures are prepared in time and strictly implemented on site, no technical problems occur, and safe construction is guaranteed. Carefully and carefully analyze the stope, predict the change of the working face ahead of time, and eliminate the hidden dangers in time. In particular, the 34003 surface coal seam belt mining and 3026, 3204 working noodle strip mining and other measures. The comrade actively participated in and seriously studied and analyzed the on-site situation of the coal mining face, advanced the prediction of coal mining face changes and hidden dangers, and formulated the optimal mining plan in time. In the 3rd month, the company participated in the development of the 3309 complex mining face mining plan. It was mined under the condition that the roof was not netted, and safe mining was achieved by taking measures such as advanced control and re-laying. In May of this year, it participated in the development of the 34004 above-mentioned small-face mining scheme. In the case of large mine pressure, broken roof and difficult support, 31,500 tons of safe coal mining was achieved by strengthening the support strength of the working face and controlling the roof. Economic benefits.

The comrades carefully studied the safety files of the superiors, went to the scene to grasp the key points, timely arranged the handling of unsafe hidden dangers on the scene, and timely stopped the illegal operations and violations of the rules in the scene. In particular, the coal mining face has passed the fault, the initial pressure and the work surface retracement, and can do three shifts to the scene, and the same work with the staff, and find the problem in time. Never care about personal gains and losses, the average monthly attendance of more than 28 days. The number of downholes per month was more than 24 days, closely cooperated with the leaders, and led the staff to complete the tasks assigned on time and successfully completed the tasks assigned by the leaders. Since taking office, the comrade has proposed more than 40 suggestions for the district team to rationalize and deal with 20 safety hazards.

Part 2: Summary of personal work of coal mine technicians

My name is Ma Konglin. I am 35 years old. I am a male, Han nationality. I graduated from the Jiaozuo Coal Industry School in June 1997. I am currently a three-team technician and assistant engineer. I will now report my work on safety production in July 2010 as follows:

In July 2019, the mine arranged for us to open three teams responsible for the 420-meter standardization project of the second horizontal track and the 840-meter standardization project of the 21172. After receiving the production task, I immediately went deep into the first site. According to the standardization standards for safety and quality of state-owned coal mines and the requirements for standardization of mine safety and quality, the site of coal seam water injection will be convened successfully. I can consciously perform my duties and formulate strict and practical. Safety production measures, strict implementation of "Five Excellent" mine construction and construction standards. Under the correct instructions and leadership of the chief engineer of the mine and the party and government team and safety production departments of the mine, strictly perform their duties, organize the staff of the team to actively carry out safety technical training and safety knowledge training, and archive the safety production of the group company and mine. The spirit of the meeting instructions was implemented in a timely manner in the hearts of every employee, so that everyone has standards in mind and make new progress every day.

In July, under the correct leadership of the party and government team, as an engineering and technical personnel, I actively cooperated with our mines and our team to strictly serve the production and serve the production. In March, I attended a total of 31 days of attendance, including 19 underground drills and 12 shifts. According to the actual production conditions, I compiled the technical measures for the safety production of the quality of the two horizontal rail corridors and the construction of the 21172. Safety production technical measures, "Safety measures for the replacement of steel beams in the main well", and "Safety measures for the special safety measures for the three teams", carefully formulate safety production measures in July and prevent accidents The safety production organization measures, resolutely "one project, one measure", ensured that our team can complete the safety production tasks and safety and quality standardization standards issued by the mine in quality and quantity, and was praised by the mine leaders and relevant departments. And definitely.

The leaders of the Party at all levels have strictly emphasized that "safe production only has gas stations and no rest points." I always keep in mind the party's "safety first" production policy, and actively assist the mines and the team to do their jobs actively. Responding to the spirit of the company's science and technology mining, actively carry out business learning and technical training and technological innovation, so that work and study are correct, two promotion. Through learning, not only has my knowledge of safety production technology been greatly improved, but also my vision of safe production knowledge has become more comprehensive and open. To do my job is to continuously learn and to learn to work better. In the maintenance in July, we opened three teams to cooperate with the electromechanical three teams of vulcanized tape to control the rods. According to the actual situation of the site, I formulated the method of “four pressures and two smashes” in detail to ensure that the poles were safe and have achieved good results. , was fully affirmed and praised by the mine leadership and safety production departments.

In the work, I can consciously work with the team, strictly do not go late, leave the same class with the staff, follow the class, be good, help our team to lay a solid foundation for all work, find problems on the spot, solve problems. , to eliminate the hidden dangers in the bud. Resolutely make the leader of the regional team science and technology, do the right and left hand of the team, and be praised and fully affirmed by the leaders of the team and the relevant safety production department leaders. Due to the busy work of the district team, the team leaders arranged other matters, I will bear in mind and strictly follow the requirements, and fulfill our due responsibilities and obligations for the safe production and construction of the harmonious team of our team.

In short, under the correct leadership of the mine leaders and various departments, under the correct leadership and arrangement of our team, I can consciously adhere to the party’s safety first policy and strictly follow the organizational requirements and earnestly study the party’s guidelines and policies. Self-consciously study the safety of the group company and the mine and the spirit of various conference archives, and go deep into the first site, so that the prepared operating procedures and safety production technical measures are loyal to the regulations, higher than the regulations, and can better serve the production of our team. At the same time, in the future work, I strictly follow the party's regulations on the integrity and self-discipline of cadres, and strive to be honest, self-disciplined, and strive to be the model of science and technology management personnel in all aspects, overcome the problems of self-existence such as rashness and impatience, and strictly obey me. The rational deployment and scientific arrangement of the mine and our team enable us to better serve the mine, contribute to the mine, and make due contributions and obligations to the group company and our mine.

Part 3: Mining Technician Work Summary essay


I xxx, graduated from xx Industrial School in January xxx, and entered the mine in September xxx, and was assigned to the mining area as a mining technician. The main task is internship learning. Because what I had learned in school before was the theoretical knowledge of books, I didn't really experience it on the spot, so I started to contact the real leaders of the work area every day.

Listen carefully to the pre-class meeting before going down, understand the work arranged, why this arrangement and the operation of the underground. Combined with the relevant theoretical knowledge and the actual situation on the spot, it is familiar with the heart. In December xxx, he participated in the mine pressure observation in the Qi mining area under the guidance of the professor of Shandong University of Science and Technology. From this, we can understand the change of the top plate motion control, effectively control the step distance of the top plate to ensure the safe production of the working surface.

In March of xxxx, I started the staggered shift between the morning shift and the night shift with xx. To understand the entire coal mining process construction process, and to solve the emergency measures encountered problems. Understand the matters needing attention in the aspects of eye-opening, charging, shooting, refurbishment, back-column topping and roof change and on-site combination; how to adjust a series of relevant knowledge to be learned according to the actual situation of the site when encountering faults. And after the well, follow the competent technicians to continuously explore new methods and new experiences; carefully prepare various safety technical measures according to the actual situation on the spot, and achieve a one-engineering procedure.

In March, xxxx was dispatched by the company to Shandong University of Science and Technology to train "Mining Engineering". According to the previous field knowledge learned during the mine shift, the theory combined with theoretical knowledge has enabled me to have a deeper understanding of the coal mines; enriched my professional knowledge and actively engaged in extracurricular technical discussions with other students. At the time of the internship, I actively participated in the practice, and continued to learn in light of the actual situation of my mine and my own professional understanding, and humbly consulted the professional teachers at the school. Upon graduation, I was honored to be awarded the title of “Excellent Student” and successfully completed my study career. Although some achievements have been made during the school, there are still some gaps; in the future work, we will study harder and actively, and strive to achieve better results.

In February, xxxx graduated and returned to work in the mining area. The work area was scheduled to continue on-site. The 3,702b working face that has been mined is very complicated, with a series of phenomena such as broken roof, coal wall slab, large water leaching, soft bottom plate and bottom drum, and large faults. The net topping and partial sections are advanced.技术 and other technical measures; hanging top piece gang, has been intensive support and raft; drenched water belongs to the fissure water will disappear with the progress of mining; the bottom plate is soft and has been strengthened by wearing iron shoes, the bottom drum is broken The bottom guarantees high mining and safe exit; the roof of the fault is severely broken and there is water drenching. Here, intensive support has been made, and safety technical measures are formulated according to the actual situation.

Combining the above experiences, I realized that only the field can learn excellent knowledge. Do a combination of theory and practice, and learn and use. It is necessary to carefully study the laws, regulations, procedures, standards and technical specifications of coal mines. Seriously face your own business, and do the mentality of today's work today, and actively go deep into practice and work; strive to achieve good results, get recognition from the leadership, build a modern mine, and do one for Pingguo Guozhuang Thin force.

Part 4: Summary of work of coal mining technicians

I am ***, graduated from xx Industrial School in January, and entered the mine in September of the ***, and was assigned to the mining area as a mining technician. The work summary of China University Network Fan Wen: Coal mining Summary of technician work. The main task is internship learning. Because what I had learned in school before was the theoretical knowledge of books, I didn't really experience it on the spot, so I started to contact the real leaders of the work area every day.

Listen carefully to the pre-class meeting before going down, understand the work arranged, why this arrangement and the operation of the underground. Combined with the relevant theoretical knowledge and the actual situation on the spot, it is familiar with the heart. In December of the ***, he participated in the mine pressure observation in the Qi mining area under the guidance of the professor of Shandong University of Science and Technology. From this, we can understand the change of the top plate motion control, effectively control the step distance of the top plate to ensure the safe production of the working surface.

*** In March of the year, I started the interweaving of the morning and night shifts with xx. To understand the construction process of the entire coal mining process, and to solve the emergency measures encountered in the problem, to understand the matters needing attention in the aspects of eye-catching, charging, shooting, refurbishing, back-column topping and roof change and on-site combination; According to the actual situation on the spot, adjust a series of related knowledge to be learned. And after the well, follow the competent technicians to continuously explore new methods and new experiences; carefully prepare various safety technical measures according to the actual situation on the spot, and achieve a one-engineering procedure.

*** In March, the company was sent to Shandong University of Science and Technology to train “Mining Engineering”. According to the previous field knowledge learned during the mine shift, the theory combined with theoretical knowledge has enabled me to have a deeper understanding of the coal mine; enriched my professional knowledge and actively engaged in extracurricular technical discussions with other students. At the time of the internship, I actively participated in the practice, and continued to learn in light of the actual situation of my mine and my own professional understanding, and humbly consulted the professional teachers at the school. Upon graduation, I was honored to be awarded the title of “Excellent Student” and successfully completed my study career. Although some achievements have been made during the school, there are still some gaps; in the future work, we will study harder and actively, and strive to achieve better results.

*** In February, he graduated and returned to work in the mining area. The work area was scheduled to continue on-site. The conditions of the 3702B working face that has been mined are very complicated, such as broken roof, coal wall slab, large water leaching, soft bottom plate and bottom drum, large faults, etc.技术 and other technical measures; hanging top piece gang, has been intensive support and raft; drenched water belongs to the fissure water will disappear with the progress of mining; the bottom plate is soft and has been strengthened by wearing iron shoes, the bottom drum is broken The bottom guarantees high mining and safe exit; the roof of the fault is severely broken and there is water drenching. Here, intensive support has been made, and safety technical measures are formulated according to the actual situation.

Combining the above experiences, I realized that only the field can learn excellent knowledge. Do a combination of theory and practice, and learn and use. It is necessary to carefully study the laws, regulations, procedures, standards and technical specifications of coal mines. Seriously face your own business, and do the mentality of today's work today, and actively practice and work.