[Boutique] Security Agreement Template

Part 1: Model of the Security Agreement

In order to ensure the personal safety of students during their school years, clear responsibilities, improve school education - parenting education - social education integration network, according to the Ministry of Education issued "Study on Student Injury Accidents" and relevant laws and regulations, combined In fact, our school has signed this security agreement:

1. The guardian of the student is the parent of the student or the guardian determined by law. The guardianship relationship is not transferred to the school due to the student's enrollment. The school and the student are only educational management relationships. The guardian shall provide students with safety education and law-abiding education; during the school, the school shall provide students with safety education and law-abiding education.

2. If the student causes personal or property damage to others, especially the guardian shall be liable for compensation, and the student shall be subject to damages during the school period and shall be dealt with in accordance with Article 3 of this Agreement.

3. During the life and study period of the school, the third party shall be responsible for the damage caused by the third person; if it can prove that the school is at fault, the school shall bear the compensation according to the size of the school’s fault. Responsibility; if damage is caused to others, the student shall generally be liable for compensation, and if it constitutes a crime, it shall be transferred to the judicial organ for handling.

4. The following conditions can be used to determine that the school is not at fault: the occurrence of the damage incident has nothing to do with the facilities of the school, or although it is related to the facilities of the school, the facilities of the school are not defective; the school or the teacher fulfills the duties of education management. Damage incidents are inevitably inevitable.

5, students should leave school immediately after school, non-school or teacher reasons students stay in school, play and play, causing injury, the school does not bear the responsibility for compensation.

6. It is strictly forbidden for faculty and staff to insult, beating, corporal punishment and corporal punishment in disguise. If the result is caused by the faculty member's own responsibility or by the faculty and the school, the school may also take disciplinary action against the faculty and staff according to the circumstances, but the faculty and staff will perform the duties. Responsibilities, normal criticism education, and unintended consequences, the school is irresponsible.

7. The school shall carry out collective activities inside and outside the school. The school shall bear the responsibility for the accidental injury caused by the organization; if the student does not listen to the command and violates the relevant regulations and causes accidental injury, the school shall not be responsible; during the daily class, the students are not responsible. When you arrive at school or leave school, the school should promptly notify the guardian of the student. If the student causes social harm or an accident, the school will not be responsible.

8. Students should strictly abide by the traffic rules. If there is a traffic accident, the responsible party is responsible; riding a bicycle on campus, the accident occurs in violation of regulations, and the school is not responsible.

9. The school strictly prohibits students from playing with fire, playing with electricity, playing with water, playing with artillery, artillery, and playing with sharp-edged blunt objects. Therefore, compensation disputes are usually caused by the perpetrators; if the perpetrator or the victim can prove that the school and the teacher know If the above dangerous situation is not stopped, the school bears part of the responsibility.

10. Students should eat and stay at the designated place of the school. If the school has no accidental consequences outside the school, the school will not be responsible. The school is not responsible for the unintended consequences of providing accommodation and accommodation. The boarding party designated by the school shall perform the duties according to the responsibility letter signed by the school. Otherwise, the accommodation party shall be responsible for the unintended consequences. If the injured party can prove that the school has not fulfilled its management duties, the school can assume part of the responsibility.

11. Schools must strengthen the inspection of school buildings and other equipment and facilities to remove hidden dangers in a timely manner. If the hidden danger cannot be cleared in time, it must be closed and a warning sign must be added, and the students should be given safety education. If the hidden dangers are not eliminated and there is no warning sign, and the students are not safely educated, causing injury to the students, the school shall be liable for compensation.

12. It is strictly forbidden for students to go to the river ditch of Shantang Reservoir to take a bath and cause accidents. The school is not responsible. 13. If the faculty and staff are away from the job or if they are not in the job but fail to perform their duties seriously, or violate the work requirements and operating procedures to cause an accident, the school is responsible and the responsible person is held accountable.

14. Insured students have a safety accident or accidental injury during campus activities. The school has the responsibility to actively cooperate with parents to apply for insurance claims from insurance companies.

15. After a security accident occurs, the injured student may not file a lawsuit with the people in accordance with the law if his parents are unwilling to negotiate mediation or fail to reach a consultation.

16. This Agreement is made in two copies, each party holding one copy, effective from the date of signature, valid for the duration of the student's study at the University.

In case of any defects in this Agreement, the provisions of the “Measures for Handling Student Injury Accidents” issued by the Ministry of Education shall prevail.

Party A:

Representative signature:

Signature of Party B:

May 18, 20XX

Part 2: Model Security Agreement

person A person B:

In order to fully implement the "Construction Project General Contract Construction Contract" signed by both Party A and Party B, this Agreement is signed.

I. Project Overview Project Name: Project Location: Project Content: Contracting Scope:

Contracting method: The “package clearing” method is adopted to further clarify the respective safety responsibilities of Party A and Party B during the construction process, to protect the safety and health of construction workers and prevent accidents caused by work accidents. Sign this Agreement in accordance with relevant laws, regulations and regulations. After the signature and seal of both parties take effect, it has the same legal effect as the subcontract, and both parties should conscientiously perform.

Second, the joint responsibility of both parties

1. Both Party A and Party B shall abide by national and local laws, regulations and regulations concerning safety production, and conscientiously implement national, industry and enterprise safety technical standards.

2. Under the unified leadership of Party A, form the safety production leading organization on the construction site, hold regular safety work meetings, establish and improve the safety production responsibility system and the group defense group management system, and formulate various safety production regulations and safety production target responsibilities. An integrated safety production supervision and management system and assurance system, and work in accordance with the division of responsibilities.

3. Adhere to the principle of “safety first, prevention first”, and must not violate the rules and conduct illegal operations. Safety measures should be implemented to prevent accidents when organizing construction and production.

4. Grasp the safety education, serious safety discipline, standardize safety behaviors, purify the working environment, prohibit barbaric construction, and prevent construction disturbances.

5. In the event of an accident, measures should be taken immediately to protect the scene, rescue the wounded, prevent the accident from expanding, and report to the competent department at a higher level in time to form an accident investigation team, ascertain the cause of the accident, determine the responsibility for the accident, and follow the principle of “three not letting go”. Formulate improvement measures and propose treatment opinions for those responsible for the accident.

Third, the specific responsibility of Party A

1. Party A is responsible for the safety management of the construction site. Organize and direct on-site safety production, and announce to Party B the safety production rules and regulations of the enterprise and the construction site. Check Party B's safety production assurance system and rules and regulations, and implement supervision and management of Party B's safety production.

2. Prepare the safety construction organization design of the project and decompose it into Party B's subcontracted project. The organization shall guide Party B to prepare a safe construction plan for the content of the subcontracted project, formulate safety technical measures and supervise the implementation.

3. When arranging Party B's work, propose construction methods and safe operating procedures for its construction content and process requirements, and provide necessary safety protection facilities. The person in charge of construction of Party B shall submit the safety and technical disclosure in written form, and the person in charge of Party A and Party B and the technicians shall sign and record the record. During the construction, Party B shall supervise the implementation of the contents.

4. Register and register the on-site staff of Party B, re-examine the identity documents, issue badges, conduct “three-level” safety education according to the list, and establish safety education files. Verification of the qualifications of special operators for subcontractors. Assist Party B in the management of special operations personnel, such as training, assessment, and certification, and stop non-special operations personnel from engaging in special operations.

5. Provide Party B with a good working environment to ensure full production. The electrical equipment, machinery, tools, erecting equipment, safety protection products, etc. provided must meet the safety technical standards. After passing the inspection by Party B, the written handover should be completed. The acceptance procedures shall be made in duplicate, and both parties shall check separately and supervise the safe use of Party B.

6. Conduct technical indicators and safety performance tests on Party B's own equipment, equipment, safety protection products, etc., and those who pass the test can enter the construction site. Supervise Party B to properly install and use.

7. Conduct daily supervision and inspection on the safety behaviors of Party B's construction procedures and operation posts, and correct illegal command and illegal operations. If serious violations of discipline and accidents and accidents are discovered, they should be ordered to stop work, supervised and rectified, and dealt with according to the management methods agreed by both parties. If the serious contract terminates the contract and clears the exit, all economic losses caused by Party B shall be borne by Party B.

8. When the contract terminates the settlement of the project, Party A's safety technical department shall issue a “Safety Evaluation Certificate”. Those without a safety evaluation book cannot settle.

9. Regularly inspect and maintain various safety facilities and labor protection articles on the construction site to eliminate hidden dangers in time to ensure their safety and effectiveness.

10. Provide employees' living environment that meets the requirements of hygiene, ventilation, lighting, etc., and set sensitive and effective fire-fighting equipment in areas prone to fire.

11. In the event of a casualty accident, report it to the relevant department immediately.

12. Others.

Fourth, the specific responsibility of Party B

Party B is directly responsible for the construction safety work of the unit under the unified command and supervision of Party A. According to the division of responsibilities, the following responsibilities are fulfilled.

1. Accept the command and supervision of Party A, abide by Party A's safety management system, participate in the site safety production leading organization, attend the safety work meeting, and implement the meeting decision.

2. According to the unified management regulations of Party A, formulate the safety target responsibility and management rules and regulations of the unit, and file with Party A.

3. According to the safety construction organization design of Party A, prepare the safety construction plan and safety technical measures of the subcontracted project scope of the unit, and extract and use the safety technical measures fee according to the regulations, and report to Party A for approval and implementation.

4. The construction personnel of the unit should register and make a book, report to Party A truthfully, and accept Party A's safety education. When personnel adjustment occurs, Party A should be promptly reported and safety education should be carried out. No safety education is allowed to enter the construction site. Persons and child labor without identity documents may not be hired.

5. Set the safety technical management personnel according to the requirements, and be responsible for the safety inspection during operation.

6. Responsible for safety education in pre-class safety education and job exchange. When the construction task is issued, the targeted safety technology should be carried out to check the safety of the operator. When cross-operation occurs, Party A should be reported and monitored. Non-special types of workers may not be arranged to perform special types of work, and persons with high blood pressure, heart disease and other unsuitable heights may not be arranged to work in high places.

7. Report to Party A the labor protection supplies, equipment and equipment that have been brought into use, and use them after passing the inspection. It is forbidden for anyone to remove security equipment or facilities without permission.

8. Set necessary staff living facilities, and meet the requirements of sanitation, ventilation, lighting, etc., employees' meals, drinking water supply, etc. meet the hygiene requirements.

9. When constructing a fire in an area prone to fire, it should apply to Party A beforehand, obtain written approval and take effective protective measures before construction. Special fire safety measures should be used when storing and using flammable and explosive materials.

10. Education The employees of this unit must abide by the rules and discipline, and must not violate the rules and operate illegally. In the course of construction, if Party B’s construction personnel violate regulations, violate discipline, or violate safety regulations, Party B shall be responsible for the loss, and Party A shall be responsible for compensation for losses.

11. Party B shall strictly follow the requirements of Party A's safety technology, otherwise Party B shall be responsible for personal injury or death.

5. This Agreement, as an auxiliary file of a subcontracted contract, has the same legal effect, in duplicate.

person A person B:

Legal representative: Legal representative:

Or attorney: or the agent:

Year, month, day, month, day

Part 3: Model Security Agreement

Party A:

Party B:

In order to strengthen the safety management of contracting and temporary workers, we will thoroughly implement the safety production policy of “safety first, prevention first, comprehensive management” to ensure the safety of personnel and equipment, and ensure the smooth progress of the project and temporary work of Party A to Party B during the period. . According to the relevant laws and regulations of the state, the parties have voluntarily signed the following safety production agreements through equal consultation and consensus, and as a necessary supplementary condition for the project outsourcing contract:

Article 1: Both Party A and Party B must conscientiously implement the safety production policies, laws and regulations formulated by the State.

Article 2: The safety responsibilities and rights assumed by Party A;

Party A has the right to require Party B to strictly abide by safety production laws, regulations, standards, safety production rules and regulations and operating procedures, and be proficient in accident prevention measures and accident emergency handling plans;

The management personnel of Party A shall have the right to stop the violation of disciplines of Party B personnel and impose penalties according to regulations;

Party A has the right to order the departure of Party B personnel who have poor safety awareness and do not listen to the safety production command.

Article 4: Party B's responsibilities and rights;

Party B is the direct responsible person for the safe production of outsourcing projects and temporary work, and must strictly implement Party A's regulations and systems related to safety production;

Party B is responsible for handling medical and industrial injury social insurance for all Party B staff, and purchasing appropriate personal accident insurance for those who are engaged in highly dangerous work as required. If there is a personal injury or death during the construction process, Party B shall be fully responsible;

Party B shall be fully responsible for the behavior of the work site. Party B's staff shall not operate in violation of regulations, risky operations, and shall not be fatigued, and shall be protected as required;

Party B must have fully equipped safety equipment at the project site. When it cannot meet the requirements of safety engineering, personnel must not enter the project site.

Article 3: Party B's staff must strictly abide by and obey the site safety regulations and safety management. At the construction site, it must:

Seat must be fastened at high altitude;

Do not drink alcohol before the class, and do not smoke in areas where smoking is prohibited;

Do not wear bare feet on the scene, do not wear slippers, high heels, do not wear leather shoes and shoes with nails at high altitude;

The safety equipment and safety devices and safety signs that have been erected shall not be dismantled without the approval of the person in charge of the construction of Party A;

Do not arbitrarily arbitrarily pull the wires, protect the temporary power cables and distribution boxes on the construction site, and do not use materials, tools, etc. to crimp cables and wires to ensure safe use of electricity;

Do not burn fire at the project site;

Do not throw any materials or materials from a height, and stack no more than 70% of the support weight;

Do not stack active materials within one meter of the high side;

Do not place tools and wires on the operating surface and at high elevations;

When using power tools, protective equipment must be properly worn in accordance with the operating procedures and instructions;

Safety procedures must be strictly observed during construction.

Article 4: Security Responsibility

If Party B causes a safety accident during the period stipulated in this Agreement, Party B shall bear full responsibility and Party B shall bear the economic losses and criminal liabilities caused;

If Party B or Party B's staff member fails to cause losses to Party A during the period agreed upon in this Agreement, Party B shall be responsible for compensation to Party A. Party A shall have the right to directly deduct the relevant damages from Party B's project funds.

Engineering Safety Production Agreement - Triple Reading

Article 5: This Agreement shall come into force on the date of signing, in four copies, two copies of each of the two parties.

person A person B:

Party A's construction manager: Party B's person in charge:

Year, month, day, month, day