Construction intern self-identification

Part 1: Self-identification of construction interns

First, the purpose of the internship is to enrich and expand their knowledge through contact and participation in practical work, to cultivate the ability to comprehensively apply, and to lay the foundation for future employment.
Second, the internship content participates in the operation of the whole process of measurement engineering, steel engineering, formwork engineering, concrete engineering, masonry construction, learning the construction technology and construction organization management method of each type of work, learning and applying relevant engineering construction specifications and quality inspection Evaluate the standard and learn how to deal with the technology during the construction process.
III. Internship Overview During the internship, observe the safety rules and regulations of the internship unit and the school, and have a high attendance rate. Actively ask the workers' masters to find out the problems, and use the theoretical knowledge they have learned to solve the problems with the help of the site technicians. Have a very specific understanding of steel engineering, formwork engineering, concrete engineering, etc., and practice some of the engineering.
1. The use of steel bars for steel works must adhere to the principle of first inspection and use; the steel bars must have the factory certificate and inspection report, and can be used in the project after re-inspection according to national regulations. The steel bars are processed on site, and the manufacturing process is: steel machinery Installation → steel butt welding → taper thread processing → bending forming → steel banding.
2. The template engineering formwork and its support shall be designed according to the engineering structure form, load size, foundation soil type, construction equipment and material supply. The formwork and its supports shall have sufficient load carrying capacity, rigidity and stability to reliably withstand the weight, side pressure and construction load of the poured concrete. When pouring concrete, the formwork and the brackets may occur when the mold is expanded, run, or even collapsed under the action of concrete gravity, side pressure and construction load. In order to avoid accidents and ensure the quality of the project and the safety of the construction, the requirements for the observation, maintenance and abnormal handling of the formwork and its support are proposed.
3. Concrete engineering structure The strength grade of concrete must meet the design requirements. Test pieces used to inspect the concrete strength of structural members shall be randomly selected at the place where the concrete is poured. Sampling and specimen placement shall comply with the following requirements:
1. For each concrete with a mixing ratio of 100 and not more than 100m3, the sampling shall not be less than one time;
2. When the concrete of the same mix ratio is less than 100 plates per work shift, the sampling shall not be less than one time;
3. When a continuous pouring exceeds 100m3, the concrete of the same mix ratio shall not be sampled less than once every 200m3;
4. The concrete of each floor and the same proportion should be sampled no less than once;
5. At least one set of standard maintenance test pieces shall be reserved for each sampling. The number of retention groups of the same condition maintenance test pieces shall be determined according to actual needs.
IV. Main tasks of internship The main task of our internship is to understand the type of construction of the internship site, to understand the nature, scale, structural characteristics and construction conditions of the project, to understand the operating scope and procedures of different mechanical equipment, and to consult more. I don’t know the knowledge. Try to participate and understand the preparations before and during the construction of the project, participate in the materials entering the construction site, collect relevant technical information, organize the construction internship diary, and do a good job in the end of the internship.
We should know or be familiar with the performance of the mechanical equipment commonly used on the construction site. With all sorts of questions, we asked while visiting and tried to understand the common mechanical equipment.

Part 2: Self-identification of construction intern

Since the beginning of this year, I have conducted an internship in business management at xx Engineering. During the internship process, I received enthusiastic guidance from the company's instructors, actively participated in the company's daily governance related work, compared the knowledge of business administration theory learned in the book to the actual work, and deepened the familiarity with the actual work with theoretical knowledge. Learning the theory of industrial and commercial governance, exploring the nature and laws of daily governance, has enabled me to have a deep familiarity with daily governance.
The engineering company in which we are internship is a state-owned large-scale backbone construction enterprise with hydraulic engineering, municipal administration, industrial and civil construction, road and bridge, installation engineering, etc., with general contracting level, housing construction level, municipal administration and water conservancy. Hydropower three-level, foundation and foundation level, steel structure level, mechanical and electrical equipment installation level, commercial and prefabricated components secondary, survey and design grade A, measurement level two, building materials test grade A and other qualifications. Passed the iso9002 quality system certification; in 1999 passed the iso10012 international standard certification, and obtained the "Metrics Confirmation Certificate"; in XX, it passed the ISO9001 international quality management system certification.
The details are often the most easily overlooked and often the factors that determine success or failure. I am keenly aware of these problems, so in my usual work, I pay attention to my own manners, pay attention to the subtleties in my work, and even make it perfect even if it is trivial. Serious work, hard work, always smiles every day. Cultivating team spirit is a prerequisite for communication. As an intern, under the guidance of leaders and colleagues, I actively learn from the industry, ask colleagues for experience, and experience the strength and charm of the team.
I can adjust my mindset in time, so that my heart is always in a positive state. Of course, I have also suffered setbacks in my life, which only makes me more convinced that there is only something you can't think of in this world. There is nothing you can't do.
Internship is a phased practice teaching. It is the application of theory to practice. Internship is a warm-up. Employment is a start. Warm-up before the start will help the results, and it is a win-win situation for both the company and the individual. Looking back at my internship, my feelings are deep and the harvest is rich. During the internship, I used the methods of reading and asking to further understand the development of the daily management of the engineering company, and analyzed the characteristics, methods and operation rules of the company's business development. At the same time, the company's corporate mission and entrepreneurial spirit have a preliminary understanding.

Part 3: Self-identification of construction interns

In the two years of life at the school, I learned to be diligent, learned to be strong, learned to persist, and learned to be honest. The study at the vocational school is different from the study in the middle school. The vocational school is to work, in order to improve their professional skills; while the middle school is to study. So when I was studying at the house school, I became more confident. I need to practice more in the professional class. I can't think about it. I have increased my hands-on ability. I have encountered many setbacks in my study, work, and life. In the face of this, I chose to face it bravely instead of shrinking. . I made a lot of friends at the house school. The first principle of making friends is honesty and trustworthiness. I did it. I hope that my honesty can make more friends.
My academic performance is among the best in the class. I received scholarships every semester and won the “Learning Activists”, “Excellent Student Leaders” and “Excellent Students”. These stem from my love of learning. I think that I have to be interested in doing anything, especially when I am not interested in learning. I think that the study of professional courses should not only stay in the textbook, but also read extracurricular books. The so-called "study of the sea", learning should not only stay in the textbook, should always investigate the price of market materials. Construction technology and materials are constantly evolving. Only by constantly paying attention to the latest construction technology and material prices can we learn professional knowledge.
In terms of study, I believe that the study of the construction engineering cost course requires a wide range of knowledge, including construction technology, material properties, equipment and other aspects. Learning professional courses requires a combination of practical and practical learning attitudes, careful and cautious personality. What is special is that the construction project is linked to the economy. Under the premise of ensuring the quality of the project, the loss of materials should be reduced and more economical materials should be selected.
In the class, I am a sports committee member. In the work, you need to communicate frequently with classmates and listen to others' opinions. Before the start of the 22nd school sports meeting of the Housing School, I called on the classmates to actively register. In this activity, I learned the patience and rigor of the work. Called on students to participate in various school ball games. I need to take the lead and call on the students to participate actively and to honor the class.
In the work of the student council, I served as a football referee. I have executed many games, I am more responsible and patient than before, and I have decided decisively in the face of sudden events. The final result of a match is in the hands of the referee. The referee cannot be biased towards any party. The penalty should be notarized. There should be no relaxation on the court, otherwise the penalty will be affected. When there is a conflict between the two players, I will stop at the first time and separate the players from both sides to avoid unpleasant things.
I often use the time of school and rest days to exercise, including running, playing football, playing pool, etc. Sports can better relieve stress, so exercise is very necessary. One thing I think is most proud of is 2008. On Tuesday, March 18th, from 4pm to 6:30pm, I ran 67 laps on the school playground track during the “Sunshine Run” organized by the school. I also won the second place in the “Sunshine Run”. I learned to be strong in this long-distance running. I know how to do anything that can't be abandoned halfway.
I hope that I can bring the brilliance of the school to your company and have a better breakthrough in your work to help your company develop better.

Part 4: Self-identification of construction interns

As a freshman college student, social practice is an important part of our university life. During the summer vacation of the freshman year, we were fortunate to go to the Huangzhou site for an internship. During the internship period of nearly half a month, I had some initial knowledge of the building and also accumulated social experience. The one who was responsible for guiding my team was a graduate. More than a year of seniors, he was a construction worker at that site. The internship was mainly to understand the basic knowledge of the construction site. Under the careful guidance of Wang Gong, I soon became familiar with many of the most basic knowledge on the construction site and made myself The foundation is stronger, the technology is more comprehensive, and the actual operation ability has improved. The following are some of my internship processes and experiences.
We started our safety education class for about a week. In the process, we also went to the school site. We were led by our music teacher. We learned a lot of knowledge in this week, and many teachers. Give us the class to talk about the knowledge of the construction site, and let me understand the future development route. On July 110, the first day of the real internship, I was assigned to the 2nd group of the third group. We are the Huangzhou in the morning. In the city. We were led by Mr. Wang and Teacher Ai, and there was a person from the construction site who came to meet us, and gave us a separate construction guide, which is the one I said before. He first took us to the building. Look inside, but I don't know what to do, I can't insert anything, just look here, go shopping there, then he said that if we don't understand anything, we can ask him, so our classmates will I have asked him questions one by one. He also answered us one by one. I understand that the whole building is not just a matter of construction, nor is it only the drawings of the building. There are also drawings of firefighters in the building. Of course, others I didn't stay there when I asked questions. I recorded the problems of my classmates. Later I listened to him to tell us about some engineering things. First of all, I understood the whole process of the building. The formation and process of the building are as follows: Investor investment--national review and approval--design institute to make architectural plan--winning bid--design institute to carry out architectural design--construction department approval--construction unit construction--supervisor review --Construction completed, delivery - decoration company to carry out renovation - delivery - by investors and real estate companies to buy and sell. Throughout the process, the design part of the building occupies a very important position. Therefore, every step of design should be in accordance with the regulations, and every step should be cautious. There are also processes in the design: do the plan - the plane design - the facade, the section design - hydropower, heating, elevator design.
After a general understanding of these aspects, we asked him some knowledge about drawing. He also told us that the program used for drawing is AUTO CAD--computer-aided design. The program has two-dimensional, three-dimensional drawing capabilities. The work I did was a two-dimensional drawing of the building's flat, vertical, and sectioned sections. To draw, you must first understand the function, and then familiarize yourself with the usage of each tool. There are also steps when drawing: axis--wall line--doors and windows--stairs--in-house layout--marking. Also modify while drawing. I just started to draw some simple floor plans and learn to use shortcut keys to make drawings. In the process of drawing, I also encountered some difficulties, such as the intersection of arc and line, the closing of the figure, the drawing of the stairs, and often made mistakes during these times, affecting the next operation. In these operations, you need to be careful and patience to modify.
In the process of learning, he told us that working on the construction site for half a year can be equivalent to one year of school study, so we all have to cherish this opportunity to study hard. The teachers and classmates have given me great help, so that I can take less in my studies. detour.
Experience:
The first time I went to the construction site for an internship. When I first came, I was very mentally ill and didn't know how to get along with others. After a morning, it was not difficult to get along with the master. When you encounter a place that you don't understand, you have to ask more. When you ask, you will increase your chance to communicate with the master. In this way, not only the problem is solved, but also the group is quickly incorporated. Here, we must study hard and ask questions, communicate with others, and treat people with sincerity.
This summer internship brought me more than just a social experience, but also a fortune in my life. What is more gratifying is that I also met some good friends during the internship, and they gave me a lot of help. As the saying goes: I don’t know how to apply the theory to practice. Today’s university education is based on theory. It is a great benefit for me to have the opportunity to walk into the construction site. I have another year. I graduated and went to the society. I believe this internship will help me in my future work.
Through this internship, I feel that I have gained something in design. The internship is mainly for the purpose of promoting our future work and business improvement, enhancing our future competitiveness and adding a cornerstone to our future foothold. The construction workers of the internship unit also gave me a lot of opportunities to participate in their design. I have learned a lot of problems that were difficult to solve before, and I will face the problems that I will face in my future work. This internship has enriched my knowledge in this area and made me move to a deeper level. It has a certain role in promoting my future in the society, but I also realize that I want to do this work alone. These days' internships are not acceptable. I also need to accumulate little by little in my usual study and work, and continue to enrich my experience. The road ahead of me is still very long, and I need constant efforts and struggle to really go well. I firmly believe that through this period of internship, the practical experience I have gained will benefit my life. I will continue to be verified in my actual work after graduation. I will continue to understand and understand the knowledge I have learned in the internship in the future. In my work, I will continue to apply the theoretical knowledge and practical experience I have learned to practical work, fully demonstrating my personal and life values. To achieve self-ideal and bright future efforts.
If you learn a large value on the construction site, there is a danger of cracks. However, if the surface is covered with a light insulation material, such as foam sponge, after removing the template, it will have a significant tensile stress on the concrete surface. Effect. Reinforcement has little effect on the temperature stress of mass concrete because the mass ratio of mass concrete is extremely low. It only has an effect on general reinforced concrete. Under the condition that the temperature is not too high and the stress is lower than the yield limit, the properties of the steel are stable regardless of the stress state, time and temperature. The linear expansion coefficient of steel differs greatly from the coefficient of linear expansion of concrete, and only a small internal stress occurs between the two when the temperature changes. Since the elastic modulus of steel is 7 to 15 times that of concrete, when the internal concrete stress reaches the tensile strength and cracks, the stress of the steel will not exceed 100~200kg/cm2. Therefore, it is intended to be utilized in concrete. Reinforcing bars to prevent the appearance of small cracks is difficult. However, the cracks in the structure after reinforcement generally become a large number, a small pitch, and a small width and depth. Moreover, if the diameter of the steel bars is fine and the spacing is dense, the effect of improving the crack resistance of the concrete is better. Fine and shallow cracks often occur on the surfaces of concrete and reinforced concrete structures, most of which are dry shrinkage cracks. Although the crack is generally shallow, it still has a certain influence on the strength and durability of the structure. In order to ensure the quality of concrete works, prevent cracking, and improve the durability of concrete, the correct use of admixtures is also one of the measures to reduce cracking. For example, using water-reducing and anti-cracking agents, the author summarizes its main functions in practice:
There are a large number of capillary channels in the concrete. After the water evaporates, capillary tension is generated in the capillary, which causes the concrete to shrink and deform. Increasing the capillary diameter reduces the capillary surface tension, but reduces the strength of the concrete. This theory of surface tension has been internationally recognized as early as the 1960s.
The water-cement ratio is an important factor affecting the shrinkage of concrete. The use of water-reducing and anti-cracking agents can reduce the water consumption of concrete by 25%.
The amount of cement is also an important factor in the shrinkage of concrete. Concrete with water and crack inhibitor can reduce the amount of cement by 15% under the condition of maintaining concrete strength. The volume is supplemented by increasing the amount of aggregate.
The water-reducing and anti-cracking agent can improve the consistency of the cement slurry, reduce the bleeding of the concrete, and reduce the shrinkage deformation.
Improve the adhesion of cement slurry and aggregate, and improve the crack resistance of concrete.
Concrete is constrained to produce tensile stress when contracted, and cracks are generated when tensile stress is greater than concrete tensile strength. The water-reducing and anti-cracking agent can effectively improve the tensile strength of the concrete and greatly improve the crack resistance of the concrete.
Adding admixture can make concrete compact, can effectively improve the carbonation resistance of concrete and reduce carbonization shrinkage.
After the water-reducing anti-cracking agent is added, the concrete retardation time is appropriate, and on the basis of effectively preventing the rapid hydration and heat release of the cement, the plastic shrinkage caused by the long-term non-condensation of the cement is avoided.
Concrete with admixture is easy to work with, the surface is easy to level, forming microfilm, reducing water evaporation and reducing drying shrinkage. Many admixtures have the functions of retarding, increasing workability and improving plasticity. We should be in engineering practice. More experimental comparisons and research in this area may be more simple and economical than simply improving external conditions.
4 The early curing practice of concrete proved that most of the common cracks in concrete are surface cracks of different depths. The main reason is that the temperature gradient causes the temperature in the cold area to drop sharply and is easy to form cracks. Therefore, the insulation of concrete is especially important to prevent early cracks on the surface. From the viewpoint of temperature stress, the insulation should meet the following requirements:
1) Prevent the temperature difference between the inside and outside of the concrete and the gradient of the concrete surface to prevent surface cracks.
2) To prevent the concrete from being too cold, try to make the minimum temperature during the construction period of the concrete not lower than the stable temperature of the concrete use period.
3) Prevent old concrete from being too cold to reduce the constraints between old and new concrete. The main purpose of early curing of concrete is to maintain suitable temperature and humidity conditions to achieve two effects. On the one hand, the concrete is protected from unfavorable temperature and humidity deformation, and harmful cold shrinkage and shrinkage are prevented. On the one hand, the cement hydration is carried out smoothly in order to achieve the design strength and crack resistance. Suitable temperature and humidity conditions are interrelated. Insulation measures on coagulation often have a moisturizing effect. Theoretically, the water content in the newly poured concrete can fully meet the requirements of cement hydration. However, due to evaporation and other reasons often cause water loss, thereby delaying or hindering the hydration of cement, surface concrete is the easiest and directly affected by this adverse effect. Therefore, the first few days after concrete pouring is a critical period of maintenance, and should be paid attention to during construction.
Therefore, we must be cautious in handling these events during construction, depending on the situation.
These problems are all noticed in the construction work. What kind of cement is used in the construction, the amount should be paid attention to, and the early maintenance of the concrete.
There are also template designs:
Construction preparation 1) Discharge: firstly measure the side column of the building, the axis of the wall, and draw the axis from the axis. When the template is laid, the center line and the edge line of the template are ejected by the ink line according to the construction drawing. The wall template should eject the edge line and the outer control line of the template to facilitate template installation and correction.
2) The level of the building level is directly measured to the template installation position according to the requirements of the actual elevation.
3) The bottom position of the template pad should be leveled in advance, and the debris should be cleaned to ensure the correct position of the template, preventing the bottom of the template from leaking or the roots after the concrete is formed.
4) The foreman determines the assembly design plan of the template in advance, and carries out the technical, quality and safety of the construction team.
5) The template should be brushed with a release agent. There are a lot of things to note, I won't list them here.
I firmly believe that through this period of internship, the practical experience I have gained will benefit my life. I will continue to be verified in my actual work after graduation. I will continue to understand and understand the knowledge I have learned in the internship in the future. In my work, I will continue to apply the theoretical knowledge and practical experience I have learned to practical work, fully demonstrating my personal and life values. To achieve self-ideal and bright future efforts.

Part 5: Self-identification of construction interns

With regard to this internship, the individual is still very positive about the requirements of the internship program made by the school. He also very much hopes and is eager to combine theoretical knowledge with production practice through business practice in this practical work as required by the business internship program. So that they have a preliminary understanding of the basic working procedures, working methods and professional quality requirements of professional architects. Based on this internship, I was able to work better in architectural design after graduation.
However, there are also many problems here. Because this internship requires students to arrange for themselves and contact the internship unit, it is not an internship unit established by the school to establish a relationship with the school. Therefore, on the one hand, students are in difficulty in finding an internship unit, even if they The internship unit was found, and the internship unit of the unit was not known, and whether the internship unit had a correct positioning and requirements for the intern.
I also often contacted the classmates in this internship. From what they actually did in the internship unit, they can learn that more internship units are treating interns as draftsmen. Interns are completely used as land. The cheap labor of the authentic roads, the purpose of these internship units is not to let you be responsible for teaching you design aspects, construction map knowledge, but to use the school's internship requirements to cheaply use the value of students to create more More profit. The internship effect of this is actually an internship requirement arranged by the school. At least the internship expectation I have met with my internship unit is very different.
I used to listen to the students in our class when I was chatting. They said that the design unit they were in was basically designing the drawings that they did not know from where they were asked to change the map to become the so-called design. Wang Li once talked to me. He designed the three programs with great enthusiasm for the chief engineer. As a result, the chief engineer directly found a drawing and asked him to change it. In fact, I have had similar feelings here. The plan of the theater construction drawing of my internship is the one that my internship tutor has changed. Finally, when I was drawing the construction drawing, I also used the original theater construction drawing to refer to the painting. I have a more detailed introduction in my internship week, so I just mentioned it here. However, for painting construction drawings, there is an example to learn from personal feelings is still a very good way, but I think this is more misleading for the creation of the program, but I am puzzled that we Some people in the class have already recognized this way of treating architectural creation. I personally do not agree.
I want to understand the various problems in the internship process. These also have personal internship attitudes, internship requirements, and the current climate of Chinese construction industry for architectural creation. In the internship, the school also has no place for the interns to enter the internship unit, which is not reasonable. On the one hand, the school requires very strict internship results to be returned, on the other hand, it cannot provide a very responsible unit and an internship tutor to bring students. I think the school should be well acquainted with the work of the internship. Some people may say that being a draftsman in an internship is also a social role experience. Maybe we work out and finally become a painter, but at least we are still dreaming. Every student in the architecture department is now I hope that I can become a true architect at some point in the future, and I will think about myself for each of my plans. I hope that this dream should not be broken prematurely.
Therefore, I have always hoped that I can play the role he deserves for the internship. I think this is what every intern expects. Schools must think about this problem, interns should also think about this issue, and society has more responsibility to think about the problem of interns. I know that the internship can have a long process to his due role, but I have never given up hope for him. Maybe this day will come back soon.
Misunderstandings of Internships Many interns have an experience of internships only in their work in the internship unit. This is the case with many of my classmates. As I said before, in the design unit, there are a lot of general workers who give us a wrong understanding of architecture. At least I think my chief engineer is a little misleading.
My personal understanding of the architectural internship should be that the building is not just the experience and understanding of what the design unit is doing. It should also go out and understand the architecture and the city through the intuitive understanding of architecture and the city, as well as the architectural space and the urban landscape. The street has a feeling of being personal, although I already know about it. However, it is not well implemented. It cannot be said that my internship is not in place. But I still feel the role and re-understanding of the building in the process of going out only a few times. This has been recorded in the internship week, one time is "going into the Sunshine Palm Garden." Once it was "into the new library in Shenzhen." In the Sunshine Palm, what I feel about the building is an architectural understanding of the difficulty and turning into a bright spot, in the general real estate. The bottom layer is a problem that is difficult to handle. Because more users don't like it. I don't really buy the bottom floor plan. One is afraid that the above things will fall accidentally. Another reason is that the bottom layer is easily damp on the ground. The practice of Sunshine Palm Garden is precisely to use the low-lying nature of the ground floor, and then treat him into a garden type that the above-mentioned apartment type cannot have. This has a new feeling for my previous real estate understanding. When I walked into the new library in Shenzhen, I experienced more of the space master's spatial processing techniques and techniques. The masters who worked up and down, both inside and outside, did give me a sense of space. Therefore, if you don't get out of the design unit, you can't feel it when you walk into the building itself.
When I came to Shenzhen, it was very early. When I was in the same dormitory, I decided to come to Shenzhen for an internship. I hope I can live in a rented house. I don’t agree with this proposal. I hope that I am myself. Can rent a room separately. This decision later proved that I was right. There were several times when they went to rent a house together. They played cards together during the double-day and leisure time to pass the time. This is exactly what I was worried about when I was renting a house when I was at school. Although I can share the role of rent, I hope that I can read some books in excess time, so I decided to come alone when I came to Shenzhen.
In addition to the factors that I have to study for the purpose of studying in one's environment, I also always feel that whenever I have to study, in fact, during the internship, we have a lot of time wasted by us. It is. I don't want my youth to be consumed in these inactive times. I may be lucky, but the feeling is unfortunate. Unfortunately, my early work is often not saturated. More often, they give me a half-day time to solve the problem but give me a day or even more. For a long time, I also complained about how much I can harvest such a workload, but on the other hand I am also lucky. Because I almost didn't work overtime, the Shenzhen Bookshop Center provided me with another place to study. Because it is very close to where I live, more time is spent here after the shift, the internship week mentioned The two books "City Records" and "Architect's 20 Years Old" were all read in the book-shopping center during this period. In addition, there are two books that are recommended for the postgraduate study. The 20th lecture on foreign ancient architecture prepared by Chen Zhihua "Twenty Lectures on Chinese Ancient Architecture" written by He Xiqing. There is also a book about the recommended book of the postgraduate study "Chinese Artisans", this book is bought for 100 yuan, why is it because I have no salary in the design institute internship. Buying him down is not only because of the postgraduate entrance examination, but also because the individual feels that the book can be read and can be read repeatedly.
Through these own feelings and my own observations, what I have to say is already very clear. The limitations of our understanding of the internship are too low. Therefore, the misunderstanding of the internship lies in the internship that more people know. It is understood that participating in the actual work in the design unit, while ignoring the understanding of the society, understanding the city is also the content of our internship. There is also a reading process that is an uninterrupted learning process in life.
Internship summary In fact, the above content has some things about the nature of the internship summary, but more of the above are reported, discussing the internship problem, and outside the design unit. My internship has not yet covered the specifics of the specific things I did in the design unit. However, this part of the content is also summarized in the internship week. Here I will be doing a project introductory and the gains and confusions in the process of designing and drawing the construction drawings. I will end my entire internship period as the final content of this internship.
In my return receipt, the internship plan assigned to me by the chief engineer was until the end of August, but at the end of June, it ended early. Except for the reasons for the postgraduate entrance examination, there is another reason why I don’t want to mention too much. Because here, there is no salary for a penny, and I have said to my classmates that this is a shame. As a result, the money brought by the body was exhausted for 4 months. I really had to earn the end of August. It is estimated that going home is also a problem. Finally, I decided to end the internship period of the original plan ahead of schedule. However, when it is coincidental, the content of the internship plan is basically completed. Here, the teacher can check the internship plan and the contents of the internship work that I sent back in April.
When I first came, due to the incomprehensibility of the software required by the unit, the chief engineer thought that it would take a month to improve my drawing level. It is the drawing training of the internship arrangement, but the rational software used by the unit really has much in common with the software of Tianzheng I used in school, so I basically used the two-week time to be very skilled. It was a soft body. The plan that gave me training at that time was the more famous real estate in Shenzhen, "Ding Tai Feng Hua", and his meaning to me has been recorded in the internship week, so I don't want to repeat too much here. Here is the mastery of the use of a new software, in fact, in the first month of the month, in addition to being familiar with the use of software, here are two magazines "Architectural Journal" and "World Architecture" can be seen, other time in front Said to spend at the Shenzhen Book Center. It can be considered another harvest.
Since this time I was very dissatisfied with the arrangement of this internship method for the internship unit, I asked the chief engineer to talk once in April, and there was a design internship arrangement for the duty dormitory in April, although this project is not It is very large and basically a building with a comprehensive dormitory. Party A requires that the ground floor is the canteen of the staff, and the standard floor above is the staff quarter. In the process of participating in this design. The deputy dean here is the direct person in charge. When he analyzed our plan, he left a very deep words to me: to do design, the first thing to do is to analyze the volume, just like a person has a good body shape, so that people can have a A good impression, the latter is the Peugeot of the five senses. In the process of chatting with him, I was very envious of the fact that he had been to Europe, had seen the Safyi Villa in Cobb, and had been to the pyramid of Pei Ming... But what I have been unwilling to agree with about this program is that they have been Adhere to the treatment of hygiene, because from my actual life as a benchmark, such a public dormitory should not be arranged without the bathroom and the shower room, I can not imagine a person pulling next to others and others willing to be inside Taking a shower, the problem is that this is still the dormitory of Shenzhen Airport Group. Every year, companies that create value in the company treat the company employees. Anyway, the design was finally done according to the opinions of so-called people with work experience.
This design has come to an end for a week. Wu Gong, another chief engineer of the design institute, received a file invited by Jinjia Group for tendering. This file has printed text in my internship, which is also not satisfactory to me. The place of this design institute. I have never seen a bid there, and the project is basically a project commissioned and invited by others. However, this has nothing to do with me. In fact, I still like this set of methods for the chief engineer to do the design. In order to do this, he first asked the model company to do the base model, and he also called the party to give a call. Arrange the time for the plant technicians to introduce the process flow. This, I followed, the first time to enter the factory technical staff to explain, these are much more useful than some of the leadership of our school. I am very appreciative of a design concept of the chief engineer. He understands this terrain abstractly as a running sport circle, and the hill is a human head. The mountainsides on both sides are understood as the line of the athletes running, and the result is the arbitrariness of the dean, using his so-called very reasonable plan. So there is a plan for the Jinjia Group that I am not willing to bring back. If the teacher looks at the bidding file requirements and planning plan, he knows that it does not match the requirements of Party A. I don't want to make too many brief descriptions here. In general, this planning and design has also taught the pre-design process of science, although the results are not very good.
The drawing of the final construction drawing, in addition to my complaint that the time is too long, I am very grateful to the chief engineer for giving me the opportunity to make this construction drawing. I have learned so much here, the work requirements and other buildings. The professional cooperation is very rare. Mastering the details of the building nodes made me realize the importance of building construction.