Thoughts on Safety Production Management of Power Supply Stations in 2019
First, the annual safety production management work guidance and safety production management objectives
1. Safety guiding ideology: Adhering to safe production is the eternal theme of electric power enterprises. It adheres to the principle of “protecting the human body, protecting the power grid, and protecting equipment”, adheres to the principle of “prevention first”, adheres to the principle of people-oriented, education improvement, and pays close attention to In place {safe production responsibility person in place, safety direct responsible person in place, special responsibility and team leader in place}; focus on strengthening nine management {"two votes three system" management, two measures management, team management, construction site management, safety equipment Management, fire equipment management, distribution lines and protected area management, low-voltage distribution network management, traffic safety management}. Full implementation of the safety responsibility system for managers at all levels, and conscientious implementation of the "three regulations" of China Southern Power Grid Corporation. Consolidate the foundation of safe production management and ensure the realization of the full production goal.
2. The center of production management and the target safety work center: protect the person, protect the power grid, protect equipment, and increase efficiency.
Safety work objectives:
Control minor injuries and obstacles, serious injuries and personal injury and death accidents;
Large-scale power outages and major equipment damage accidents with human liability are zero;
Major fire accidents and major traffic accidents of equal or above are zero;
The accident rate of the distribution line trip is less than 0.15 times/km. Three hundred-day safety records with no assessment accidents are achieved in the year;
Strive to be responsible for the safety record of accidents throughout the year. 2. Work content is responsible for the planning, construction, safe operation, maintenance and repair of power distribution facilities of 10kv and above.
Responsible for the detection and maintenance management of the grading leakage protection device in the power supply area;
Responsible for the promotion of safe use of electricity in the power supply area and the safe management of customer electricity;
Responsible for the training of our staff's safety knowledge, technical skills and safety production performance.
Third, the work requires the basic work of safe production management. The main contents are as follows:
1) Adhere to the principle of “safety first, prevention first”, and conscientiously implement the national guidelines, policies, laws and regulations on safety production and regulations, standards and systems for safety production in the power industry.
2) Establish and improve the safety production responsibility system with the director as the first responsible person, and clarify the safety production responsibilities of all types of personnel.
3) Establish and improve safety production rules and regulations, and organize safety activities on a regular basis.
4) Establish and improve various technical materials, accounts and records of safety production management, and timely report anti-accident measures plans, safety technical measures plans, equipment overhauls and renovation plans according to regulations.
Strictly define the demarcation point of the property rights of the equipment, and clarify the security responsibilities of the parties according to the ownership of the property rights.
According to the requirements of relevant regulations, set clear signs for distribution lines and equipment in the power supply area. The main contents are as follows:
1) Distribution line name and tower number.
2) Name and number of the distribution area.
3) Phase sign.
4) Schedule name and number of line switch and knife gate.
5) Transformers, capacitors, cable ends, on-rod switches and knife gates, outdoor distribution boxes, and distribution equipment are subject to special warning signs.
The division of equipment management in the power supply area is clear and the responsibility is to the people. In accordance with the relevant regulations, the equipment shall be inspected, inspected, tested, maintained and overhauled. Equipment defects should be recorded and classified according to defect level.
According to the provisions of the “Administrative Measures for Power Consumption Inspection”, the safety of customers in the power supply area shall be checked regularly or irregularly. The customer shall be notified in writing of the problems found during the inspection and urged to rectify within a time limit.
According to the requirements of the "Regulations for Installation and Operation of Leakage Protectors in Rural Areas", the leakage protectors of all levels shall be inspected, inspected, tested and maintained regularly or irregularly to ensure the installation rate, commissioning rate and correct action rate of the leakage protectors at all levels. The requirements of the ministerial standards.
Strengthen the voltage management of the distribution network and take measures to improve the quality of power. Generally, the client voltage pass rate should reach 95% or more.
Strengthen the load management of equipment to prevent overload operation of equipment and serious unbalanced operation of three-phase load.
We will publicize laws and regulations such as the Electricity Law, the Electricity Supply and Use Regulations, the Regulations on the Protection of Electric Power Facilities, and the rules and regulations of the power industry, and do a good job in the protection of power facilities and the popularization of safe electricity use.
When operating and overhauling power supply equipment, the “two-vote-three-system” system must be strictly implemented. The details are as follows:
1) Work tickets and operating tickets should be kept on a monthly basis and kept in a safe place. The "two votes" pass rate should reach 100%.
2) The person in charge of the power supply, the work licensor, and the work guardian shall be organized, trained, and published by the higher authorities.
According to the 32-word principle of “selecting preferred purchase, on-demand equipment, registration, periodic inspection, bad seal repair, lack of filling, correct use, and proper custody”, we will do a good job in the construction of safety tools. , inspection, use and storage.
According to the equipment condition and maintenance plan, plan the spare parts of the preparation, and select the preferred purchase, sort and store, and keep it safe.
Production and electricity
If the net is injured or injured, it should be reported to the superior department in time and the accident should be organized immediately.
1) Adhere to the principle of “three not letting go” and assist the higher authorities to investigate, analyze, process and report the accident.
2) Identify the location and cause of the accident as soon as possible, eliminate the root cause of the accident, and prevent the accident from expanding.
3) Minimize the scope of accident power outages and reduce accident losses, and restore power to the power consumers who have been out of power as soon as possible.
We will implement the heavy production and heavy penalty regulations for safety production, formulate clear safety production assessment rules, and reward collectives and individuals who have made significant contributions to safety production. Those who commit serious accidents, illegal operations, and violations of regulations will be punished.
In short, in the new year, we have carefully organized and implemented the study, and built the safety management work plan of our institute in close cooperation with the actual annual production safety targets and measures formulated by the bureau. Implementation to ensure that the safety objectives of our office are completed throughout the year.
recommended article
- Second semester school safety work plan
- 2019 law-enforcement work plan
- New school year school safety work plan
- 2012 first semester safety work plan
- Safety and security work plan
- 2019 first semester safety work plan
- Jinghua Middle School 2019 School Safety Work Plan
- Safety and security work plan
- 2019 law-based governance work plan
- Elementary School's 2019 Safety Comprehensive Work Plan
- National Small Safety Education Program
- National Small 2019 Safety Work Plan
popular articles
- School safety work plan
- 2014 is very touching words
- College entrance examination inspirational quotes
- The latest high school inspirational maxim
- Kindergarten safety work plan
- Traffic safety work plan
- English famous words
- Class safety work plan
- Classical life motto
- Injured sentence
- Deaf people jingle 2019
- Qq space mood phrase
- I want to say something to the teacher.
- Second grade first semester legal education program
- Du Yuexi's famous sayings
- Company safety production month activity plan
- National Small 2019 Safety Work Plan
- Thanks to the friend's words 2019
- 2019 Kindergarten Preschool Safety Education Program
- Sad love sentence 2019
- Teacher's famous saying
- Describe the fast time sentence 2019
- Korean swear words
- a good saying that loves labor
- Bing Xin’s famous words
- Tao Xingzhi's famous sayings
- Taizai’s famous sayings
- Strong words
- 2019 National Small Class Safety Work Plan
- National Small Safety Education Program