Summary of China's automatic identification industry work in 2019
On January 12th, the National Association of China's Association of Automatic Identification Technology held a press conference in Beijing to introduce the progress of the association's work over the past year. 2006 is a milestone in the history of China's automatic identification technology development. China Association of Automatic Identification Technology has completed the change of work and under the leadership and overall planning of the new board of directors, the development of the association has entered a new era. At the stage, the work has achieved remarkable results and completed the established work objectives. In 2006, the membership development and renewal of the association was in good condition. As of December 15, 2006, the total number of group members was 135. In the new year, China Association of Automatic Identification Technology will be guided by the spirit of the Fifth Plenary Session of the 16th CPC Central Committee, adhere to the principle of “collaborative integration, independent innovation, and key leapfrogging” to improve independent innovation capability and accelerate China's automatic identification. Industrial development.
In 2006, on the basis of the functions of the original branches, the organization of the organization was further strengthened. On April 22, the China Automated Identification Technology Association Strategic Research Group was established and the annual work plan of the working group was determined. In the same month, the Institute of Automation of the Chinese Academy of Sciences and other units began preparations for the establishment of the Biometrics Working Group. Relevant topics carried out by the Association in 2006, "Technical Specifications and Application Guidelines for Barcode Printers", "Investigation on the Status of Radio Frequency Industry", and "Annual Reports" were organized and implemented by various working groups. The results of the project "Technical Specifications and Application of Barcode Printers" The Guide and the China Automatic Identification Annual Report have been officially published by the Machinery Industry Press. The publication of the two books has once again filled the gap in this field in China. In particular, the industry research report on RFID is the first comprehensive development in China. The research work is finally an important part of the RFID industry's digital reference in the annual report.
In the seventh part of the ISO/IEC 18000 series of standards, the conversion work was completed by the RF Working Group in 2006. So far, the RF working group has completed the conversion of all ISO/IEC18000 series standards in more than two years, laying a good foundation for the formulation of national standards and standards. At present, on the basis of the work of the ISO/IEC18000 series of standards for the conversion of the national standard, the National Standards Committee has approved the project, and the association will participate in the formulation of the six national standards.
In order to implement the "10th Five-Year Plan" and the national science and technology medium- and long-term development plan, and realize the strategic goal of "China Barcode Promotion Project", the bar code automatic identification technology will be applied in a deeper scope. In 2006, the “China Bar Code Promotion Project” car project was launched. The association organized a large number of research work, wrote tens of thousands of words of research reports and submitted them to relevant departments, and drafted the national standard “EAN.UCC system code and barcode for auto parts”. Logo. At present, pilot projects for auto companies to apply the global unified logo are being actively carried out. Taking the "automotive propulsion project" as an opportunity, we will continue to expand the application of automatic identification technology in the wide-area manufacturing industry. Strengthening cooperation with government departments and industry leaders is a concrete manifestation of the association's role as a bridge and link. It will also be the 2007 association. Important work. The development of automobile special projects is a new field to develop automatic identification technology, undertake the formulation of relevant technical standards, and cooperate with relevant industry authorities and applied enterprises, and have conducted useful discussions and attempts.
2006 is an important year for the development of EPC and RFID technology. After overheating hype in 2005, people began to pay close attention to every aspect of international technology and application. The China Association for Automatic Identification Technology continues to organize “going out, please come in”, visiting the United States, Japan, Taiwan and other places, and the third China International EPC and RFID Forum held in Beijing to provide international understanding and experience. Access to information exchange platforms. Organizing a variety of activities and extensive publicity, the annual International Automatic Identification Technology Exhibition and various special events are important activities for the Association to publicize and promote automatic identification technology. In 2006, there were more independent products and more international exhibitors. The exhibition was very popular. In the same period, new product/new technology conferences and 2006 international RFID technology application forums were held, all showing automatic identification in China. The industry is booming and maturing. The 2007 exhibition will continue in Beijing.
In 2007, China Automatic Identification Technology Association will integrate the advantages of automatic identification technology in multi-industry, multi-region, multi-field and deep-level integration, strengthen exchanges and cooperation with related industries, and declare the EAN.UCC system code and barcode for auto parts. Identify the national standards, publicize standards, establish pilots, and advance the process of automotive special projects. Support the research and development of China's independent innovation and internationally competitive automatic identification technology products, and promote the establishment and improvement of China's automatic identification technology industry chain. Strengthen the standardization of automatic identification technology, organize members to participate in the formulation of relevant national standards, and undertake and complete national standard projects. On the basis of the research of the subject, the research results are summarized to lay a solid foundation for the standardization work of the next year. Through international exchanges, strengthen international cooperation, and promote the rapid development of the automatic identification technology industry and the deep development of the market after the introduction of advanced technologies and programs.
In 2006, on the basis of the functions of the original branches, the organization of the organization was further strengthened. On April 22, the China Automated Identification Technology Association Strategic Research Group was established and the annual work plan of the working group was determined. In the same month, the Institute of Automation of the Chinese Academy of Sciences and other units began preparations for the establishment of the Biometrics Working Group. Relevant topics carried out by the Association in 2006, "Technical Specifications and Application Guidelines for Barcode Printers", "Investigation on the Status of Radio Frequency Industry", and "Annual Reports" were organized and implemented by various working groups. The results of the project "Technical Specifications and Application of Barcode Printers" The Guide and the China Automatic Identification Annual Report have been officially published by the Machinery Industry Press. The publication of the two books has once again filled the gap in this field in China. In particular, the industry research report on RFID is the first comprehensive development in China. The research work is finally an important part of the RFID industry's digital reference in the annual report.
In the seventh part of the ISO/IEC 18000 series of standards, the conversion work was completed by the RF Working Group in 2006. So far, the RF working group has completed the conversion of all ISO/IEC18000 series standards in more than two years, laying a good foundation for the formulation of national standards and standards. At present, on the basis of the work of the ISO/IEC18000 series of standards for the conversion of the national standard, the National Standards Committee has approved the project, and the association will participate in the formulation of the six national standards.
In order to implement the "10th Five-Year Plan" and the national science and technology medium- and long-term development plan, and realize the strategic goal of "China Barcode Promotion Project", the bar code automatic identification technology will be applied in a deeper scope. In 2006, the “China Bar Code Promotion Project” car project was launched. The association organized a large number of research work, wrote tens of thousands of words of research reports and submitted them to relevant departments, and drafted the national standard “EAN.UCC system code and barcode for auto parts”. Logo. At present, pilot projects for auto companies to apply the global unified logo are being actively carried out. Taking the "automotive propulsion project" as an opportunity, we will continue to expand the application of automatic identification technology in the wide-area manufacturing industry. Strengthening cooperation with government departments and industry leaders is a concrete manifestation of the association's role as a bridge and link. It will also be the 2007 association. Important work. The development of automobile special projects is a new field to develop automatic identification technology, undertake the formulation of relevant technical standards, and cooperate with relevant industry authorities and applied enterprises, and have conducted useful discussions and attempts.
2006 is an important year for the development of EPC and RFID technology. After overheating hype in 2005, people began to pay close attention to every aspect of international technology and application. The China Association for Automatic Identification Technology continues to organize “going out, please come in”, visiting the United States, Japan, Taiwan and other places, and the third China International EPC and RFID Forum held in Beijing to provide international understanding and experience. Access to information exchange platforms. Organizing a variety of activities and extensive publicity, the annual International Automatic Identification Technology Exhibition and various special events are important activities for the Association to publicize and promote automatic identification technology. In 2006, there were more independent products and more international exhibitors. The exhibition was very popular. In the same period, new product/new technology conferences and 2006 international RFID technology application forums were held, all showing automatic identification in China. The industry is booming and maturing. The 2007 exhibition will continue in Beijing.
In 2007, China Automatic Identification Technology Association will integrate the advantages of automatic identification technology in multi-industry, multi-region, multi-field and deep-level integration, strengthen exchanges and cooperation with related industries, and declare the EAN.UCC system code and barcode for auto parts. Identify the national standards, publicize standards, establish pilots, and advance the process of automotive special projects. Support the research and development of China's independent innovation and internationally competitive automatic identification technology products, and promote the establishment and improvement of China's automatic identification technology industry chain. Strengthen the standardization of automatic identification technology, organize members to participate in the formulation of relevant national standards, and undertake and complete national standard projects. On the basis of the research of the subject, the research results are summarized to lay a solid foundation for the standardization work of the next year. Through international exchanges, strengthen international cooperation, and promote the rapid development of the automatic identification technology industry and the deep development of the market after the introduction of advanced technologies and programs.
recommended article
- Summary of work and working ideas
- Township to village, college student cadre education management
- Personal summary of college student village officials in 2019
- Middle school biology teacher 2019 personal professional development
- Summary of the work of the Anhui Trade Fair of the 97th Canton Fair
- Students Qingming Festival sacrifice sweeping revolutionary martyrs tomb total
- 2013 college freshmen military training summary speech
- Summary of freshmen's military training
- The first class semester did not summarize the speech
- Summary of family planning work
- Summary of work in the first half of the year and work arrangements for the second half of the year
- Summary of the work of the students who just attended the work period
popular articles
- English famous words
- Teacher's famous saying
- Organizational department annual work summary
- Classical life motto
- Deaf people jingle 2019
- Bing Xin’s famous words
- Summary of College Student Union Work
- Summary of student funding work
- 2014 Student Affairs Summary
- Thanks to the friend's words 2019
- The latest high school inspirational maxim
- Korean swear words
- Tao Xingzhi's famous sayings
- I want to say something to the teacher.
- Taizai’s famous sayings
- Qq space mood phrase
- Sad love sentence 2019
- Summary of middle school students' education
- Describe the fast time sentence 2019
- Strong words
- Student union work summary essay
- Student management work summary
- Summary of 2014 College Student Official Work
- Student final summary
- College entrance examination inspirational quotes
- 2014 is very touching words
- Du Yuexi's famous sayings
- Injured sentence
- a good saying that loves labor
- Student work summary