Summary of special rectification work for safety production

In 2019, it was the " safety production special rectification year" determined by the provincial government. The company earnestly implemented the various requirements and regulations for special rectification and actively carried out special rectification work for safety production. After one year of special rectification of safety production, the company's safety production situation has fundamentally improved, and it has achieved certain results, eliminating unsafe factors in safety production, promoting the steady development of the company's safe production, and creating safer for employees. A healthy working environment. The current special rectification work for safety production this year is summarized as follows:

First, the company profile

Our company is a company integrating mining and reducing iron powder. It has more than 2,000 employees and total assets of 440 million yuan. It administers three mining areas with ore reserves of 48.76 million tons. It has 6 branches and a joint venture. It has formed "iron ore - concentrate powder - ultrapure ore powder - sponge iron - primary powder - secondary powder" and "concentrate powder - ultrapure ore powder - ultrapure ultrafine mineral powder - rubber and plastic powder - Rubber and plastics heterogeneous powder - magnetic materials - rubber and plastic materials products, two major industrial chains. The main products are: iron concentrate powder, reduced iron powder, rubber and magnetic powder, and other three series of more than ten varieties.

In 2019, the company produced 199,000 tons of concentrate powder, paid taxes of 117.72 million yuan, and paid over RMB 53.42 million. The total amount of the two was RMB 170.14 million, which was the county's major taxpayer. In 2019, according to the actual situation of the company, the company determined the overall thinking of the work: “simulating the market to learn about steel, adapting to the market for survival, ensuring safety and increasing efficiency, and improving quality to the market”. Since February, the mines and tailings ponds of our company's first, second and fourth branch companies have successively obtained safety production licenses, and have resumed production and acceptance through the city and county safety supervision departments, and started to resume production. From January to November, our company produced 470,000 tons of raw ore and 180,000 tons of concentrate powder. Under the influence of the international financial crisis, the sales price of concentrate powder dropped sharply and the market of mineral powder was sluggish. The company faced an unprecedented dilemma, but it still did not discount on safety investment. In January and November, a total of 7.15 million yuan was put into safety costs. Solidified the foundation for safe production.

Second, the basic situation of safe production

The company has perfected the safety production management institutions at all levels, established the safety production committee, and the other leaders of the general manager are the deputy directors. The relevant departments and managers of the branch offices are members, with clear responsibilities and detailed division of labor. Each branch company has established a corresponding safety production organization management organization, and has a safety department. The safety department has a safety group to form a safety production supervision and management network from top to bottom.

The company always adheres to the safety production policy of “ safety first, prevention first, comprehensive management”. In 2009, we took the construction safety standardization as the goal, the safety education and training as the means, the special rectification work as the measure, and the hidden danger investigation as the breakthrough. Comprehensively strengthen the basic management of production safety , strengthen the implementation of responsibilities, pay close attention to accountability, and form a safety production management system with full participation, all-round management, and whole process prevention.

Third, special production work for safety production

Since the beginning of this year, our company has earnestly implemented the “Special Rehabilitation Year for Safe Production” as determined by the provincial government in 2019, and actively carried out special rectification actions for safe production. In accordance with the requirements and deployment of special rectification work for safety production at the provincial, municipal and county levels, the company actively carried out special rectification work for safety production throughout the company, and achieved the expected results of special rectification work, which promoted the steady development of the company's safe production. The specific work situation is as follows:

1. Deployment, launch, and publicity phases

Establish an organization to define responsibilities

According to the requirements of the special rectification work of the city and county, the company has set up a special group for safety production rectification with the general manager Li Guangjian as the leader, and formulated a special rectification work plan for safety production. With the No. 1 file of 2009, the “Notice on the Special Rehabilitation of Safety Production in the Whole Company” was issued. The plan was well-defined and the responsibilities were clear. The scope, inspection contents, remediation methods and steps of special rectification were formulated. Each unit and department shall be responsible for the special rectification work of safety production within the scope of their duties in accordance with their respective division of labor, and require the members of the leadership group to raise awareness, recognize the situation, and conscientiously carry out special rectification work for safety production within the scope of the unit.

Propaganda and mobilization to raise awareness

In order to do a good job in the special rectification and mobilization of the company's safety production, the company held a mobilization meeting of the company's workshop directors and above on February 28, and did not regularly guide and supervise the progress of the publicity and mobilization work of all units. All units actively echoed the spirit of the company's safety production special rectification meeting, promptly mobilized the meeting to convey the level by level, and carefully arranged and arranged. Make full use of pre-class meetings, newspapers, slogans, newspapers and other forms to carry out extensive publicity and mobilization. All employees recognized the importance and necessity of this special rectification work, and formed a vertical and horizontal-to-edge pattern, so that all cadres and workers actively participated in the activities of this special rectification.

Schedule deployment

According to the company's " safe production special rectification" program, the way of special rectification work is clearly defined as: in accordance with the "branch self-inspection and self-revision, the company's comprehensive follow-up inspection", each branch first self-inspection by team, workshop, safety The department comprehensively inspected, and the relevant functional departments of the company comprehensively tracked and inspected the mines and tailings ponds of each branch according to their respective division of labor. Clear and specific arrangements and requirements have been made for the work steps and priorities of the special rectification.

Steps for special rectification work:

The first phase of the overall deployment and publicity campaign, one month

The second stage is self-examination and self-examination, and the time is two months.

The third stage of classification and remediation, the time is six months

The fourth stage, "Looking back," re-examines and summarizes the time for two months.

The focus of the special rectification work:

According to the safety production characteristics of non-coal mines and the actual situation of safe production of the company, we focus on the following aspects:

Engineering quality, ventilation, on-site danger, and blasting operations in underground mining operations.

Improve the anti-falling facilities, safety protection devices, three-slope three-story, wire rope, equipment testing, daily maintenance and inspection records in transportation.

Local fan position in local ventilation, air leakage in the air duct, irregular installation, and circulating air flow.

The management of the stope is not standardized, the operating procedures are not standard, and the roof inspection is not in place.

Key equipment safety protection measures, equipment maintenance and repair, and operational records are not perfect.

Collection, use, registration, temporary storage, and withdrawal in civil explosive management.

Underground drainage, fire prevention.

The height, steps, slope and safety protection measures of the mine drainage field.

Tailings dam body, slope ratio, detection facilities, flood control facilities, tailings discharge, telephone, lighting facilities, and storage of flood protection materials.

2. Self-examination and self-checking and troubleshooting

In-depth investigation

Shen Guixi, the chairman of the company, and Liu Wuwen, the deputy general manager, personally led the safety , production and technical personnel to inspect the underground of the one to four branches and the ground, the selection workshop, the tailings pond and other work sites, and carried out the inspections everywhere. Carefully and comprehensively investigate the hidden dangers, formulate a solution, clarify the person responsible for rectification, and issue a notice of rectification within a time limit. The leaders of the branch company attach great importance to the special rectification work of safety production, strictly carry out safety production inspections in accordance with the formulated work plan, and carry out safety inspections one by one according to the requirements of the investigation contents, and do not let go of each work surface and each work link. The departments and offices of the company conduct special investigations and supervise the safety production of the branch within the scope of their respective duties, ensuring that each production unit is inspected and rectified in place, leaving no dead ends and leaving no safety hazards.

Seriously rectify and eliminate hidden dangers

After two months of self-examination and rectification, the company's leaders and departmental personnel went to the scene for inspection 41 times, and investigated and rectified 116 various safety hazards. For general accidents, the person in charge of the production unit is ordered to make measures to implement the rectification on the spot. For the hidden dangers that are difficult to rectify in a timely manner, the deadline for rectification and rectification is issued, and the “three-set” is implemented, and the rectification situation is reviewed; Hidden dangers, the inspectors issued three notices of partial suspension of production on the spot, and rectified within a time limit. All hidden dangers have been rectified, and the rectification rate of safety hazards has reached 100%, which has effectively promoted the company's safety special rectification work.

3. Special supervision and classification and rectification stage

In accordance with the special work plan for safety production formulated by the company, the third stage of classification and rectification work, the company department and each branch company should use various methods to carry out classification and rectification, and do a good job in inspection and rectification. It is mainly for the special inspection and rectification of civil explosive management, mine ventilation, tunneling ventilation management, electrical equipment, lifting transportation, mining, recycling, fire prevention and drainage, and tailings storage, reviewing the hidden dangers and safety of existing rectification. Hidden dangers are rectified.

From May to October, each branch company classified and reviewed the problems found in the self-inspection and self-inspection of the previous stage and the rectification of the hidden dangers, to prevent the hidden dangers from rebounding, and to investigate and rectify the rectification of the incompleteness of the rectification. According to their respective responsibilities, the relevant departments of the company have carried out special rectification of the production units, and promptly supervised and guided rectification.

During the classification and remediation stage, the company organized relevant departments to conduct classified safety inspection and rectification. A total of 256 safety hazards were identified, including 64 mine ventilation, 29 civil explosion management, 57 mining, 36 electrical equipment, 20 lifting and transportation, 24 tailings storage, and 26 other. The general problem was rectified at the scene, and a rectification plan was formulated for the major safety hazards found, and the rectification was carried out within a time limit. A total of 24 rectification plans have been formulated, and all rectifications have been completed after review.

In October, the company carried out a review and inspection of the special safety inspection and rectification of production units, and supervised and rectified the problems raised by the provincial, city and county linkage inspections to ensure that the achievements in the special rectification of classification were consolidated and the company's safe production was guaranteed.

4, "Look back" and check again

In the re-examination of the fourth phase of the special rectification of safety production carried out in November-December, on the basis of consolidating the first three stages of rectification, we will continue to implement various management systems and accountability systems, and increase the investigation and management of hidden dangers. The implementation of safety hazard rectification measures, a total of 57 rectifications. Through the re-examination of the fourth stage, the achievements of the special rectification work of safety production this year were consolidated, which laid a solid foundation for the future safety production of the company.

Fourth, increase the responsibility of hidden dangers beforehand

In the special rectification work, the individual operation surfaces that did not reach the wind speed and the safety protection measures were not in place were partially shut down and rectified; the personnel who violated the rules and regulations were educated and trained; and the branch companies with weak rectification work were investigated for the responsibility of the hidden dangers. Those responsible for special rectification and ineffectiveness were given suspension, writing inspection, training and study for one week, and they were resumed after passing the examination; the "three violations" personnel were fined, and the total safety penalty for this year was 26,000 yuan. . Through accountability, it has effectively promoted the in-depth development of special rectification of safety production; adhered to the principle of “ unsafe, no production, no standard or no production”, and achieved good results in special rectification work.

Safety is no small matter. We must attach great importance to it, raise awareness, strengthen management, strictly follow the rules, conscientiously implement various safety management systems, implement safety production responsibility systems at all levels, and conscientiously do a good job in safety production. Although we have achieved some results through the one-year safety production special rectification, there is still a big gap in the requirements for safe production. In the future safety production, we must conscientiously implement various safety policies, laws and regulations, procedures and standards, and always Safety work is placed in the first place in the company's work, and efforts are made to grasp the company's safety production work, grasp the results, and achieve results.