2014 safety officer work summary

Article 1:

Since I started my safety work in November last year, with the help of leaders at all levels and the help of my colleagues, I have conscientiously implemented the Safety Production Law and the safety first, prevention-oriented work safety policy and fulfilled my own safety. Production responsibility, earnestly do a good job in each job, accumulated a certain amount of work experience, and achieved certain results.

The safety work in the past year has been centered on the management system of “safety standardization”, which is mainly carried out in three aspects: occupational health, safety and environmental protection. When I first started working in safety, my work experience was not very rich. There was always one or another problem in my work. In order to be familiar with various businesses in a short period of time, I constantly enriched myself through various channels to learn safety knowledge, and gradually became a qualified security officer through the "safety standardization" work.

The following is a brief introduction to the main work I did in 2007 and my plans for future work.

1. Carry out various safety work in accordance with the requirements of the “Safety Standardization Standards for Practitioners of Hazardous Chemicals”

In September last year, I participated in the first training course of "Safety Standardization of Dangerous Chemicals in the Industry" organized by the Provincial Anke Center. The "Safety Standardization Standard for Dangerous Chemicals" is in the trial stage, and it is working on safety production. , made clearer and more specific regulations. As a security officer, I actively studied the "Specifications" and compiled detailed "Safety Standardization Implementation Plan" according to 10 A-level elements and 51 B-level elements, and gradually carried out work according to these elements to make the normative content. It truly runs through the production activities and plays its due role to promote the safe production of our factory.

In July 2007, the safety standardization assessment team conducted a self-assessment of the work and scored 98 points. After the end of the self-evaluation, the projects that did not meet the self-assessment were rectified one by one, and passed the acceptance of the Provincial Anke Center from December 2 to 3, 2007.

Second, a lot of rooted production line, extensive experience of all parties

In the new year, I hope that I can have more opportunities to join the production line because it will give me enough nutrients to grow. Only when it is really rooted in the production line can we have a deeper understanding of occupational health, safety and environmental protection, and promote my better work. We can communicate with the frontline workers and draw extensive experience to find problems and expand my Work ideas, truly achieve the coordinated development of occupational health, safety and the environment.

Third, correctly handle interpersonal relationships

In daily work, there are many exchanges with superiors, organs, and workshop personnel. In the daily work process, there may be problems of one kind or another, and friction will inevitably occur. This requires me to take a correct attitude and actively avoid such problems. Young people are very easy to behave in their work. When dealing with problems, they are likely to consider not enough, and the mind is impulsive to make irrational things. I will try to avoid them in my future work. Correctly handle the relationship with other colleagues, and actively and optimistically help colleagues who have difficulties.

4. Suggestions for the future work of the chemical plant

It is hoped that safety management will be more humane. In the inspection of the workshop, not only should we find the deficiencies, but also find more advantages, encourage employees to make suggestions for helping the safety work, and reward them in due course.

Constantly carry out publicity and education on employees' safety, enhance employees' safety awareness, and truly transform them from "make me safe" to "I want security."

Safety staff personal work summary

The new year is about to begin. I have reviewed the past year. This model is very good. He is good for my reflection on the lack of work in the previous period. I will summarize the work in the future. This year, my work and the next step.

First, safe work is the lifeline of the enterprise

Construction safety is a constant unremitting work. Safety, environment and occupational health have been listed as the first place in the construction work. From the bidding of the project to the completion and acceptance of the entire project, it is always through us. One of the main lines of work is indispensable. The enterprise safety production license is hard-won. No company will be difficult to move, especially at the end of last year, the global financial crisis, especially for our industry. In the fiercely competitive construction market, it is even more difficult to take on a project. It is not easy to undertake a project. To do it well, to ensure the completion of various indicators, it takes more effort and we need every manager. Do your own job in a down-to-earth position.

Second, the safety work is not fine

In the first half of 2009, it entered the peak period of installation and construction. Many construction sites were cross-worked with civil works, and the number of operators was greatly increased. The quality of employees was uneven. The construction team often neglected the safety work when the work was busy. The rules and regulations are always too troublesome to implement, and there are some feelings of emotion in the employees' minds. Some people even wear the necessary labor protection articles, which makes our rules and regulations in part, and becomes a slogan. Sometimes just to cope with the inspection, once this phenomenon spreads, it will bring incalculable losses to the safety management of our project, and at the same time...

Safety staff personal work summary

Since I joined the work as a "full-time security officer" in March 2006, I have been "making a qualified security officer" as the pursuit of my current job. Since I shoulder this important task, I have always kept a clear-headed mind, treated my work with diligence and steadfast attitude, and have served in the current position for six years, strictly in accordance with the safety work goals set at the beginning of each year, and fully implemented "safety." First, the safety policy of “prevention first, comprehensive management” strengthens safety production management. With the trust and support of the relevant leaders of the project department, I cherish this security shape and put it into the work with a positive attitude. I feel very fulfilled in the past six years. The work of the individual in recent years is summarized as follows:

1. Taking "Being a qualified security officer" as the driving force for your work, thinking about the patriotic love of the party, thinking about the interests of the bureau, and assisting the leaders in charge to implement the safety production responsibility system and strengthen the relevant safety production. Propaganda and communication of laws and regulations, solid security training, and faithful implementation of the "Safety Objectives Responsibility Letter" commitment to ensure the smooth implementation of the project's three-level safety production goals. Dedicated in management, rigorous safety awareness and professional ethics, the signs of lack of safety awareness, lack of experience, fear of trouble, inertia, through the safety day activities, security meetings to analyze and stifle in the bud. Work with the staff of the project department to learn the skills knowledge of safety, absorb the analysis of accident cases, summarize the lessons of the accident, and continuously improve the business level. As long as the development of the project department is conducive to safe production, it is the first step.

2. Under the correct leadership of the leaders in charge, carefully supervise the safety functions of the equipment and personnel in the construction area, and eliminate the habitual violations in the planning, layout, inspection, summarization and assessment of safety production, and resolutely seize the undocumented Homework, resolutely punish other security violations, so that they can grasp the major hidden dangers and weak links that threaten safety production.

3. Keep abreast of safety production through daily safety inspections. Every day, we can go to the construction site to inspect the safety production, conduct a comprehensive inspection of all the jurisdictions of the project department four times a month, organize relevant personnel to inspect the special equipment and vehicles, and supervise and urge the relevant departments and operation teams to carry out maintenance and maintenance so that all equipment can Healthy and stable operation.

4. Take the initiative to take the lead in “safety evaluation work”, do a good job of “spring”, “summer”, “autumn” and “winter” safety inspection activities, do a good job in preparation and exercise of emergency plans, and do a good job of annual safety month. Activities, etc., in these activities, with strict, detailed and practical requirements, we have carried out earnestly and solidly, achieved good results, and received praise from superiors.

5. Seriously perform their duties, strictly enforce safety in the implementation of the "safety assessment" work, organize relevant personnel to do a good job in the evaluation work, and strictly improve the safety management level, and greatly improve the project management department. Security situation.

6. The safety work in recent years has centered on the management system of “safety standardization”, which is mainly carried out in three aspects: occupational health, safety and environmental protection. When I first started working in safety, my work experience was not very rich. There were always problems in this work. In order to be familiar with various businesses in a short period of time, I constantly enriched myself through various channels to learn safety knowledge, and gradually became a qualified security officer through the “safety standardization” work.

7, a lot of rooted production line, extensive experience of all parties. At work, I hope that I can have more opportunities to join the production line because it will give me enough nutrients to grow. Only when it is really rooted in the production line can we have a deeper understanding of occupational health, safety and environmental protection, and promote my better work. We can communicate with the frontline workers and draw extensive experience to find problems and expand my Work ideas, truly achieve the coordinated development of occupational health, safety and the environment.

8. Correctly handle interpersonal relationships. In daily work, there are many exchanges with superiors, agencies, and construction workers. In the daily work process, there may be problems of one kind or another, and friction will inevitably occur. This requires me to take a correct attitude and actively avoid such problems. Young people are very easy to behave in their work. When dealing with problems, they are likely to consider not enough. The mind is impulsive to make irrational things. I try to avoid them at work. Correctly handle the relationship with other colleagues, and actively and optimistically help colleagues who have difficulties.

9. Seriously carry out the work of "Safe Production Month", and carried out special rectification actions and comprehensive supervision. When the national "safe production month" arrives, carry out various safety activities, such as "three violations" and "three no harms" and other activities, and earnestly do a good job in safety education and training. Special training for relevant personnel on power safety knowledge, safety knowledge of special types of work, etc. Constantly carry out publicity and education on employees' safety, enhance employees' safety awareness, and truly transform them from "I want to be safe" to "I want security." And let the staff thoroughly understand the importance of safety and the origin of the "National Security Month" and other security knowledge.

10. Do a good job in the qualification review and supervision of the external team. The external team is an indispensable cooperative unit in the construction process of our unit. The operators generally have many problems such as low academic qualifications, weak security awareness, and disobedience management. Therefore, it is the supervision work to do the three-level safety education for the external staff. the key of. In the work, I actively organize new recruits to carry out three-level safety education and training, and bring safety knowledge to every construction worker. The training course is carefully completed in a “people-oriented” attitude to prevent the occurrence of phenomena that exist on the surface; Co-unit qualifications, monitoring the wages of migrant workers and the purchase of life insurance to ensure the interests of each construction worker.

11. Do a good job in special equipment and vehicle management. Whenever I arrive at a new project department, I will immediately start counting statistics on vehicles and special equipment. In recent years, the management of special equipment by the state and relevant departments has become more and more strict. If the information is blocked and the management of special equipment is not in place, the project department is likely to bear unnecessary economic losses and reputation, so before the installation of special equipment, I will Actively go to relevant departments to carry out special equipment installation and notification work, communicate and consult with them, maintain good cooperative relations, ensure the smooth operation of special equipment inspection; each project department has more vehicles, and the types are also complicated, and the regulation and classification management is me. It is also an indispensable job to learn from the masters of the masters.

12. Actively carry out the investigation of hidden dangers and earnestly realize the safety affairs. In each project department, I actively established a hidden danger investigation and management system and seriously carried out the investigation and registration of hidden dangers, and effectively monitored and guided the governance process. Carefully listen to and collect the rationalization and safety suggestions and opinions of the team, and reflect the safety voice of the employees to the higher level.

13. Regarding the environment, I have formulated my own environmental control targets according to the notice of “Important Environmental Factors and Control Measures of the Company” and the relevant requirements of the Owners and Supervising Department, and recorded important environmental factors, mainly solid waste. Emissions, noise, dust, waste oil, waste gas, and fire. The control measures include: the living garbage pool is set in the living area, used for fixed-point stacking of solid waste, and buried regularly; garbage bins are set in the office living area to collect general waste; solid waste on the construction site includes scrap steel, wood, Hardware materials, etc., organized by the Ministry of Materials and Materials for timely recycling, and classified storage, as far as possible to achieve reasonable recycling and reuse, reduce waste of resources; equipped with dust-proof labor insurance supplies for construction workers; monthly irregular inspections for living areas and construction areas Mainly for the inspection of electrical lines to prevent electrical fires and electric shocks.

14. According to the spirit of the notice from the owner, the supervision department and the company, I assisted the project department to successfully complete the annual flood control inspection and preparation work, established a safety inspection system for the living area, and formulated and reported detailed flood prevention emergency plans and plan exercises. plan. Actively organize the construction personnel of the project department to participate in the flood control exercise in the work area, sum up the experience in the exercise, find out the deficiencies, and ensure that the real time comes, and the loss can be minimized.

15. Constantly learn to enrich yourself and complete a solid transformation. Security is an eternal topic, and the ocean of security knowledge is boundless. I am constantly charging myself while I am at work. Read familiar with relevant safety production regulations, relevant work safety procedures, and consult relevant safety technology knowledge to truly create a new era, new ideas, and full-time safety management personnel.

In the past six years, due to the high attention paid to safety production work and the joint efforts of the various teams of the various departments of the project department at all levels of the project department, the safety production work of the project department has achieved some results, and no major safety accident has occurred. The company's economic development and staff stability have contributed. While affirming the achievements, I also clearly realized that there are still some shortcomings in the work of safety production and control: the first point is that a small number of responsible persons have a weak awareness of safety production, and the concept of safe production is still relatively weak, and there is a chance of luck; the second point is Very few operational teams have not been timely and rectified, and they are not in place, and they are dynamic variables. Occasionally, small accidents occur occasionally. The third point is that many special types of work teams do not have special work permits, and there are undocumented posts. It is the safety production publicity and education that needs to be carried out in a lasting and in-depth manner; the existence of these problems requires me not to be blindly optimistic, to always keep a clear head, to further enhance the sense of urgency and responsibility, to be numb in work, to do our utmost to strive for effective measures. To improve the level of supervision and comprehensive governance. On the basis of summing up the results, I will continue to find gaps, find weak points, clarify the direction of efforts, and strive to push my safety work to a higher level.

Personal summary of the construction safety officer at the end

In order to continuously improve the professional quality of the construction and construction enterprise management personnel and ensure the quality and safety of the project, according to the “Construction Office No. 31” of the “Construction of the Unified Examination of Construction and Construction Professionals in 2019” by the Municipal Construction Engineering Administration, This year, we will continue to conduct unified training and examinations for the six major members of the city's construction and construction industry construction workers, quality inspectors, safety officers, and materials workers.

The job responsibilities of the construction workers are as follows:

1. Conscientiously implement the safety production guidelines, policies and regulations of the state and superiors. Resolutely follow the technical specifications, to do a good job in safety production management as the primary responsibility.

2. Carefully and meticulously do a good job in the construction organization plan. In the organization plan, we must seriously consider the construction safety precautions, use the system and regulations to clarify the safety responsibility, and promote the project to be organized according to the plan.

3. Pay attention to inspection, supervision and technical disclosure during construction, and do not engage in blind and unprepared construction. Find hidden dangers and correct them in time.

4. Pay attention to workers' safety production education and conduct safety study on a regular or irregular basis.

5. Seriously accept the inspection and guidance of the relevant departments at the higher level, as well as the proposed rectification opinions. Keep things safe and always safe. Find problems in a timely manner and report them in a timely manner.

6. Assist the project manager and technical person in charge of the safety management of the project and bear the main responsibility for the safety problems at the construction site.

7. Participate in the investigation of industrial accidents, analyze and process the summary and report.

8. Safety education and daily production safety education for new workers entering the construction site.

9. Participate in the formulation of the provisions of the safety production technical measures in the construction plan, check the implementation of the supervision and promotion clauses, be responsible for the management and use of the safety measures identification, and record the safety accounts in a timely manner.

10. Responsible for the routine safety inspection activities of this project, and make inspection records, assist in the implementation of reward and punishment measures, stop the violations, and handle and record general accidents.

Article 2:

This year, × month × day, I am very honored to be honored to join the company as a safety officer of the anti-corrosion factory. During my time of joining XXX, it was a precious experience in my life that made up for my insufficiency. It also left me with wonderful and wonderful memories. I thank the company leaders for their caring, guidance, trust and understanding and support from colleagues. With the help, I adapted to the new working environment in a short period of time, gradually integrated into the large family of ×××, and gradually put my job on the right track, laying a solid foundation for better development and completion of work in the future. For more than two months now, as a security officer, I have become familiar with the specific issues of my position and the comprehensiveness of my work. Through my unremitting efforts, I have achieved certain results in my work and completed the relevant affairs of leadership. The trial period work and study are summarized as follows:

First, work aspects

Under the support and high attention of the company's leaders, XX factory directors, factory directors and relevant departments, we always adhere to the principle of "safety first, prevention first, comprehensive management" and strengthen "safety responsibility, focus on implementation". Solidly carry out safety production work, firmly establish the concept of safe production development, consolidate the foundation, refine the responsibility, strengthen the supervision and supervision of the operation site, and there is no safety accident. Through a short-term understanding and understanding of the company, coupled with years of experience in safety work, a lot of work has been done:

1. In combination with the actual situation of ×××, formulate, revise and establish and improve all aspects of safety production rules and regulations, operating procedures and operation instructions; to constrain the safety operations of anti-corrosion plant employees,

2. Post safety warning signs inside and outside the XX workshop; suspend safety production warnings and education slogans; standardize the rules for entering the workshop, and pass the on-site safety supervision, urge employees to abide by the existing rules and regulations, work practices and observe labor discipline, and find Hidden dangers are rectified in time,

3. In conjunction with the inspection and supervision of the safety and environment of the construction work site being constructed by ××××××, discover hidden dangers and timely rectification, with a completion rate of over 99%;

4. The number of new employees trained reaches 100%;

5. In-depth work site supervision, supervision of operators, equipment and environmental inspections, found violations at the job site to conduct critical education, fines;

6. Cooperate with the company to comprehensively inspect the work of our XX safety production; criticize and guide the safety work of XX; make all the records;

7. Cooperate with the company's comprehensive XX organization to organize the company's voluntary firefighters to conduct business technical guidance training to improve the fire safety quality of employees and ensure full production;

8. Should be XX, carry out a driver's transportation basic knowledge safety training for XX, and improve the driver's driving safety quality;

9. XX × XX should conduct a comprehensive safety inspection on the XX workshop once or twice a month, learn some good experiences, learn from each other's strengths, improve XX safety, and ensure full production.

10. Formulate the ××× month, season and annual safety work plan and organize implementation.

11. Supervise the relevant departments of ××× to do the maintenance of electrical and mechanical equipment, and the inspection, maintenance and maintenance of special equipment in the first, second and third levels.

While achieving the results, I still have many shortcomings. The safety production situation is still grim, and the safety management work will never end. In the future safety production management work, I will clarify the responsibilities according to the actual situation, increase the intensity, and work harder. Intensive and persistent efforts to ensure that the safety production situation of XX is stable; create a new situation in work safety production, and make positive contributions to the creation of XX safety production.

Second, the work plan

1. According to the actual situation of ×××, further establish and improve the safety production rules and regulations and operating procedures in all aspects, and institutionalize and standardize the safety management of anti-corrosion plants, so that the safety management level of anti-corrosion plants will reach a new level;

2. Further implement and improve the responsibility system for work safety. All departments, workshops and sections must sign a safety production responsibility letter with XX to ensure that the full production responsibility system is implemented; eliminate major safety accidents and ensure the death of workers Zero; improve the safety production responsibility investigation system, so that the safety production responsibility is truly implemented to each employee, especially the production and safety management personnel at the front line, to create a corporate safety culture atmosphere in which all employees participate in safety management;

3. Complete the layout of safety facilities in the plant according to the specifications, and move the gates of safety work forward, take precautions and pay close attention to the “three violations”;

4. Intensify safety propaganda, improve safety awareness and safety culture of all employees, strengthen employees' self-protection awareness, conscientiously publicize and implement the party and state policies and policies on safe production, and do a good job in safety remediation measures. Implementation;

5. Strengthen the safety education and training of XX employees, extensively carry out safety production skills training, comprehensively improve the safety production awareness and safety production skills of managers and production employees at all levels in production, and establish a politically competent and comprehensive technology. Safety production management team and staff team;

6. Strengthen XX fire safety management, and at the same time, provide sufficient fire-fighting facilities within the scope of the plant to strengthen the fire management work of key fire-prevention areas, and do patrol, diligent discovery, and diligently solve to eliminate various fire hazards. Provide protection against minimizing casualties and reducing company property losses;

7. Seriously follow the safety management system formulated by XX to grasp all kinds of safety production inspections, increase the investigation of hidden dangers, and carry out special treatments for various safety hazards to ensure timely detection and timely resolution of existing safety hazards and prevent safety. The occurrence of an accident;

8. Strengthen the use of special equipment and the safety management of special operators, strictly implement the system for the certification of special operations personnel, conduct self-inspection of special equipment in time, and strictly guard against the operation of special equipment to prevent the occurrence of safety accidents;

I will conscientiously implement the principle of "safety first, prevention first, comprehensive management", strengthen safety production management, put all safety management work into practice, and strive to create a corporate safety culture atmosphere in which all employees participate in safety management work. ×××Safe production management work, and make unremitting efforts to “create a good safety production environment and effectively protect the safety of the company and employees”; I will do my job properly, fulfill my duties as soon as possible, and grow up with the company. Do not live up to the trust, expectations and cultivation of the company's leadership.

I wish you all good health! The company is booming!

Article 3: