Plant greening plan

Part 1: Plant Greening Plan

With the development of the industrial zone in the development zone, modern enterprises have put forward new requirements for the environment of the production zone. The production park not only meets the requirements of the production process, but also meets the standards of the garden-style factory for the surrounding environment beautification. The pleasant greening environment of the production area not only cultivates the sentiment of the people, but also benefits the health of the employees and improves the work efficiency. Therefore, it is necessary to formulate a greening implementation plan for the plant.

Where conditions permit, the plant site should be greened to improve and beautify the plant environment. The general plant greening scope includes production management areas, main entrances and exits, both sides of traffic roads, and around production facilities.

1. The role of greening in the plant area

Ecological function: Greening of the plant area can improve the ecological environment effect, especially improve the local climate effect, affect the nearby wind, temperature, humidity, etc.; can adjust the temperature, absorb the sun heat in summer, the heat dissipation in the greening area is relatively slow in winter; can purify the air, absorb the industry The harmful gases emitted during the production process have a filtering retardation effect on the smoke and dust in the air.

Fire and noise reduction: Many trees have fire-proof function, and contain less resin, more water, and trees that do not produce flame when they are on fire, which can prevent the fire from prolonging and isolate sparks. The combination of a certain width and a certain tree species can reduce the noise. The measured data show that the 18-meter-wide forest belt can reduce the noise by 16 dB, and the 2.2-meter-wide hedge can also reduce the 5-6 dB. Manufacturers can choose different tree species according to the characteristics of the workshop.

Protection: The water and soil conservation of plants is obvious. The canopy and lawn can prevent the slope from directly washing the rain; the roots of trees and grassland are developed intricately, which can weaken the erosion of the water and fix the sand and soil particles.

Beautify the environment: The beautiful environment makes people's nervous system relax, and the psychological tranquility is obtained from the natural giving, and the visual and psychological balance is obtained. The steel structure of the factory is intertwined, and the hard objects passing through the factory frame form a harmonious factory space form with the flexible green space.

2. Requirements for greening in the plant area

In 20XX, the green space rate of each enterprise's factory area reached 15%. See attached table for details

3. Daily maintenance of plant greening

The greening landscape of the plant area was initially formed. The important thing in the later stage is to make a green land maintenance plan. The green area management measures of enterprises suggest to strengthen the following points:

Deep people carry out propaganda and education to enhance employees' awareness of environmental protection.

Develop corresponding management policies for the greening management of the plant area, so that there are plans and management.

In the overall maintenance management of tree hedges and grassland flowers, local tree species should be vigorously developed, and seedlings of various types and specifications should be cultivated in a targeted manner.

In the specific maintenance and management of tree hedges and grassland flowers, plant maintenance and management are the main tasks, including watering, fertilizing, pruning, preventing pests and diseases, and replanting.

The greening of industrial plants must be arranged in accordance with the production characteristics and environmental protection requirements of the enterprise. Highlight the natural environment construction idea, study the special nature of plant greening, according to the planning structure of the plant area, adopt concentration and dispersion, focus on the combination of general, point, line and surface, improve the grade of greening design of modern enterprises, and create distinctive features. Industrial green landscape.


Part 2: Plant Greening Plan

Doing a good job in the greening of the plant area can not only beautify the factory, absorb harmful gases, improve environmental conditions, but also create a comfortable and healthy production environment for employees, which can effectively improve labor efficiency. At the same time, the greening of the plant area can also reflect the degree of civilization of the enterprise.

I. Principles to be followed in greening planning

l. Before the planning and design, the plant's natural conditions, production properties, scale, pollution status, etc. should be fully investigated.

2. The greening plan of the factory is an integral part of the overall planning, and the greening plan should be carried out at the same time as the general planning of the factory construction. It must be carried out in accordance with the principle of unified arrangement and unified layout. The planning should have long-term considerations and short-term arrangements, which should be coordinated with the whole-stage construction.

3. The planning and design of the green space should be coordinated with the main body of the building. The main building around the line of sight should focus on greening, which plays the role of the main body, and forms a rich landscape with garden pieces and sculptures.

4. The planning and layout of the greening plan should be reasonable to ensure safe production. When landscaping, it cannot affect the lighting produced by underground and above-ground pipeline workshops.

5. In the selection of green seedlings, terrain, soil characteristics, environmental pollution, etc. should be considered. Under the premise of meeting various functional requirements, some economic tree species can be planted appropriately.

Second, local greening design considerations

1. The door environment and the greening of the wall greening factory are the link between internal and external links, and the necessary place for workers to go to work. The greenery around the gate is coordinated with the building of the gate and is conducive to vehicle and pedestrian access. The greening on both sides of the square in front of the gate should be coordinated with the greening of the road, and tall trees can be planted to guide people to the factory. Flower beds or flower beds can be arranged in the middle of the square in front of the square, but attention should be paid to the height and the visibility of vehicles and pedestrians should not be blocked. The wall greening design should fully reflect the functions of fire prevention, wind protection, pollution resistance and noise reduction, and coordinate with the surrounding landscape.

2. The road trees on both sides of the main road of road greening are mostly arranged in a row and row to create the effect of forest vagina. If the main road is wide, a green belt can be set up in the middle to ensure safe driving. On the general roads and sidewalks in the factory, three flowering shrubs with flowers and seasons can be planted on both sides of the sidewalk. Greening between roads and buildings is conducive to indoor lighting, pollution prevention and noise reduction.

3. The greening office area of ​​the office area is generally located in the upper hand of the factory, and there are fewer pipelines, so the greening conditions are better. The form of greening should be coordinated with the architectural form. The layout of the office building is generally in the form of a regular layout, which can be used to design flower beds and sculptures. Outside the building, you can use natural layouts to design lawns, trees, etc. depending on the terrain.

4. The greening around the workshop and warehouse is the key part of the greening of the plant. When designing, the use of garden plants for air purification, sterilization, noise reduction, etc. should be fully considered. According to the actual situation, the target should be selected to resist harmful gases. Tree species with strong sex and good dust absorption and sound insulation effect. For chemical workshops with high pollution, it is not suitable to plant densely planted forests around them. Instead, plant low-flowers or lawns to facilitate ventilation, facilitate the spread of harmful gases, and reduce the harm to people. In the warehouses and workshops with high fire protection requirements, it is necessary to select tree species with large water content and not easy to burn, such as coral trees, holly, and willow trees.

5. Xiaoyouyuan Green Factory Xiaoyouyuan is a place for workers to rest, entertain and perform cultural and sports activities. In the small garden, some ornamental plants with high ornamental value can be planted to enrich the scenic spots. The qualified factories can open up venues for collective activities in the small amusement park, and arrange stone tables and flower stands. The design can make full use of the existing natural conditions, according to local conditions, and with rockeries, artificial lakes, fountains and so on. While enjoying leisure and entertainment, the staff can enjoy the beauty of the park.


Part 3: Plant Greening Plan

In order to strengthen the green management of enterprises, this program is specially formulated:

I. The goal of greening management work: Through careful and reasonable maintenance, we ensure that the greening of production communities meets the first-class standard.

1. Preservation rate: The green space preservation rate is 100%. The newly-built green space “the loess is not seen in the sky”, leaving no dead ends, the preservation rate of Joe, irrigation and grass is over 95%, and the preservation rate of large trees is over 98%. In the newly built green land, the survival rate of plants is over 95%.

2, Joe shrub configuration: green plant community layered, the seasons are distinct, beautiful landscape. There is an appropriate growth distance between plants, and the plant coverage in green areas is over 85%. The greening arrangement is adapted to the requirements of the production function.

3, green features: plants grow lush, the main shrubs stand upright, the branches are intact and beautiful. The grass is green, the hedges are continuous, there is no space, no dead trees are dead; the pruning is reasonable and timely, the green space is clean and tidy; the disease and insects do not cause obvious harm, no phytotoxicity; the green space facilities and the hard landscape maintain a good shape.

Second, the maintenance standards for greening management work:

turf

1. Trim the turf 2 to 4 times a year to ensure that the turf is within 10 cm.

2. The growth potential is good during the growing season, not yellow, and the spring is better.

flowers:

1. The flowers grow lush, the plants are neat, and the group effect is better.

2, flowers bloom at the same time, basically no pests and diseases and residual flowers and leaves.

3, the flower-like flower beds are neat and uniform, there is no shortage of plants, and there are flowers in the third season.

Hedgerow:

1. The section form, height and width basically meet the design requirements.

2. Trim in time to keep the fence fence flat.

3, strong growth, fine branches and leaves, basically no shortage of broken lines, no obvious feet.

4, no obvious litter yellow leaves, causing damage and pests and diseases of the number of plants below 5%, basically no insect nets, gray nets.

Trees, flower shrubs:

1. The growth is flourishing, the plants are strong, and the crown is complete.

2. The ornamental trees and flowers are bright, and the flowers and fruits that hinder the viewing are removed in time.

3. The color of the leaves is normal. During the growth period, the yellow, coke, leaf, and dusty leaves are below 6%. There are no dead branches, no cross branches, and no branches and long branches.

4. The tree body is basically free of rod pests, and the strains with insects, insect nets and other hazards are below 4%.

5. The way of trimming the street trees of the same road is the same, the distribution of the main side branches is reasonable, and the cuts are well handled.

3. Maintenance measures for greening management work

Lawn maintenance: mowing grass trimming, spraying and fertilizing, watering and draining, and weeding waste.

1. Mowing and trimming, 2-4 times a year, from April to November, depending on the growth of the turf.

2. Spraying and fertilizing, depending on the occurrence of pests and diseases and the growth of turf, the varieties used are green environmental fertilizers and harmless pesticides.

3, watering drainage, watering mainly in the summer season, drainage is mainly in the mildew season.

4, remove weeds, remove weeds generally in the spring when the high incidence of weeds, and in the summer and autumn are regularly removed.

Hedge maintenance: pruning, fertilizing, loosening soil, preventing pests and diseases, and watering.

1. Trimming, trimming and shaping after spring and autumn tender shoots.

2. Fertilizing and loosening the soil, advancing into the winter after the spring, and applying organic compound fertilizer.

3, pest control, spring pests spray protection agents, control agents. Spray in a timely manner depending on the occurrence of pests and diseases, and use the variety as a harmless pesticide.

4, watering, attached to the turf when watering.

Tree and flower shrub conservation: loose soil, pruning, fertilizing and watering, pest control.

1. The loose soil is carried out in the spring; the soil is carried out before winter.

2, pruning, once a year in the winter after the leaves, the evergreen plants are carried out before the spring germination.

3. Fertilization, watering, and pest control are carried out simultaneously with the hedge.