Secretarial knowledge > planning copy

Work report and work ideas of the District Coal Administration

In 2019, under the guidance of the leaders of the district committee and the district government and the competent departments of the higher authorities, the District Coal Administration adopted the "scientific concept of development" to grasp the overall situation and adhered to the "people-oriented" and "safe development" concepts to establish a coal mine safety chief. The effectiveness mechanism is the main line, with the “Safe Production Responsibility Implementation Year” activity as the carrier, highlighting the three key points of “one pass, three prevention, prevention and control of water” and roof management, focusing on “quality standards” and “safety mines” to achieve full The district coal mine has achieved safe production, and the work of the bureau in 2019 is reported as follows.
First, we will do our best to resume production and acceptance. At the beginning of this year, the bureau resumed production acceptance work after the Spring Festival, and signed a responsibility statement for safety production with the mine manager. After the mine was accepted by the town government and mining company, it was accepted by the district coal bureau. After passing the qualification, the production confirmation notice will be issued, and each well will resume the production notification to the public security department to handle the procedures for collecting fireworks, restore normal production, and ensure high standards to resume production.
Second, the adjustment of the mine inspectors, the improvement of the system, and the strengthening of safety supervision. The Bureau has established a mine supervision station in each mine, further improved the incentive and restraint mechanism of the mine inspectors, strengthened supervision and assessment, and made The combination of responsibility, power and profit has strengthened security supervision.
3. Actively carry out the “Year of Safety Production Responsibility Implementation Year” and strengthen the implementation of responsibilities
1. The District Bureau continued to implement safety target management, signed safety agreements with the main leaders of the town governments, implemented the duties of territorial management, and signed safety responsibility letters with the mine chairman and mine manager. According to the safety work requirements of the municipal and district bureaus in 2019, the mines shall, in conjunction with the mine, formulate the safety work opinions of the mine and the unit, implement the safety production responsibility system, sign the safety target responsibility letter step by step, and put the responsibility in place. Vertically.
2. Improve the internal security responsibility system of the bureau, implement the business leadership bag, the department staff are professionally supervised, and the overall personnel implement the risk mortgage system, which further strengthens the responsibility.
3. In-depth development of the “Safe Production Responsibility Implementation Year” activities, and the implementation plan was formulated. Each mine established the “Safe Production Responsibility Implementation Year” activity leading group and formulated the implementation plan for the four campaigns of spring, summer, autumn and winter. Activities are carried out according to the plan.
Fourth, with the "coal production license" as the starting point, and constantly strengthen the dynamic management of safety production. The annual inspection of the "coal production license" of the bureau, the first is to establish a sound safety inspection system, adhere to the "who checks, who Signature, who is responsible for the "principle, strict control. The second is to timely inspect the production systems and production links of mines such as lifting, transportation, ventilation, drainage, and power supply in strict accordance with relevant regulations. The third is to organize experts to investigate hidden danger activities, hire experts to carry out diagnostic inspections on key links such as one-way three-proof, water prevention, and electromechanical management, and implement listing management for hidden dangers, follow-up inspections, and rectification within a time limit. Fourth, the qualification unit conducted the performance test of the electromechanical and electrical equipment, the performance test of the ventilator, the measurement of the ventilation resistance and the verification of the ventilation capacity. The fifth is to strengthen the supervision and inspection of safety training to ensure that mine safety management personnel and special types of work are certified. The sixth is to strictly check the situation of super-approved ability to organize production. The seventh is to strengthen the dynamic management of the “5 certificates and 1 photo” of the mines, urge the enterprises to handle the change and continuation procedures in time, and ensure that all kinds of licenses are complete and legal.
V. Do a good job in the three seasons of the rainy season. First, strictly implement the responsibility system for flood investigation and management, organize special investigations on water and water disasters, and establish exchanges and downholes and corresponding notification systems between adjacent mines. Conduct thorough investigation and inspection of rivers, ponds, puddles and subsidence areas within the mining area, conduct comprehensive verification and analysis of ancient wells, paleospace, especially the accumulated water in the mine over the years, carefully formulate measures for the actual situation, and implement the responsibility To the people, the measures were put in place; the second is to carry out comprehensive inspection and maintenance of the mine drainage facilities, communication facilities, power supply facilities and lightning protection facilities; the third is to strengthen the safety education for the staff of key positions such as duty shifters and pump drivers. Pre-job training, strict implementation of post responsibility system; Fourth, conducted mine electrical equipment, transmission line preventive test, main drainage pump technical performance measurement and joint trial operation to ensure the normal operation of various equipment; The reserve of flood control materials has been completed, and the flood control materials are sufficient and complete, special pools are reserved, and special personnel are managed. Sixth, the “Emergency Disaster Emergency Disposal Plan for Mines” was established, and the mines were organized for the “Emergency Plan” drill, which was carried out on May 10. The rainstorm was suspended and the actual combat was withdrawn. The emergency rescue capability of the mine has been improved. Seventh, the safety inspection and accident hazard investigations have been continuously organized, and problems have been solved in a timely manner. Eighth, the 24-hour rotation duty system for leading cadres in the flood season has been implemented, and the relevant regulations for leading cadres to go down the class have been strictly implemented. Adhere to the first-line command of safe production, and realize the shift of safety management focus and advancement.
Sixth, the next work measures:
In the following work, the bureau will continue to implement the relevant work instructions of the superiors and effectively carry out the coal safety supervision work of the Bureau in 2019. details as follows:
1. Do a good job in safety and quality standardization mine construction. At present, only Kunsheng in our district has passed the acceptance test. The remaining mines should increase the compliance standards. The district bureaus should strictly accept the inspections. If they fail to meet the standards, they will never report them. Going through the field, the purpose is to promote the safe development of mines through quality standardization.
2. Continue to carry out three actions to promote non-management and violation of responsible activities and promote coal mine safety production to ensure completeness.
3. Take various forms and continue to carry out safety inspection activities focusing on the investigation of major hidden dangers, focus on the implementation of rectification and ensure the elimination of safety issues.
4. Continue to improve the construction of the team of mine inspectors. The resident inspectors must perform their duties effectively, and the safety supervision department must do a good job in daily management and earnestly do a good job in the assessment.
5. Strengthen the education and training of mine cadres and workers. Organize special inspections of management personnel and special types of work to ensure that everyone is certified to work.

recommended article

popular articles