[Boutique] Security Responsibility Agreement

Part 1: Security Liability Agreement

Party name: Contact number:

Name of Party B: Tel:

First, the purpose

In order to maintain the common interests of both parties, ensure the construction quality and safe production, maintain a good working order and the safety and sanitation environment of the construction site, the construction agreement is signed by both parties.

Construction project:

Construction site:

Construction time:

V. Content of the agreement:

1. When Party B enters the factory, it must be approved by Party A's leadership, and the construction person in charge shall be appointed. Safety supervision shall be established at the construction site.

Coordination and contact during construction. At the same time, Party A shall provide construction work for Party B on the premise of not affecting the safe production operation of Party A.

Benefits and services.

2. Before the construction of Party B, it is necessary to carry out safety education for the construction personnel through the station safety supervision, and sign the construction safety with Party A.

The All-Agreement, the project not signed in the safety agreement shall not start construction; Party B shall not subcontract to other projects after obtaining the project of Party A.

The construction team, if Party A confirms that the project has a subcontracting fact, Party A may request to stop work or cancel Party B's construction rights, and find another supplier to cooperate;

3. Before the start of construction, the construction work area, safety precautions and hot work applications must be reviewed by the safety supervision and management department of both companies.

Over

4. Construction workers must wear labor insurance clothing in order to enter the factory. Special operations personnel must also carry special operation operation certificates.

Inspected by Party A's safety management personnel and superior supervisors;

5. Party B shall set up obvious signs in the construction area, and it shall be closed for concentrated construction projects with long time, and the construction personnel shall apply

The activities in the work area shall not enter the non-construction area at will, and the personnel of Party A shall have the right to inspect at any time;

6. The safety protection equipment of the construction team must be in place, and the safety measures are effective. Otherwise, the work industry will not be opened;

Party B shall be responsible for any personal injury or accidental loss caused by such accidents.

7. If water, electricity or gas is used during the construction process, the construction unit must fill in the application form. With the consent of the leader of Party A, the professional shall specify the water, electricity and gas locations, electrical wiring and pipeline connection specifications. And installed by the construction unit

Only qualified instruments can be used. The required cost is borne by the construction unit;

8. If there is a need for hot work during the construction process, the construction unit shall submit an application to the relevant unit or department of Party A according to the level of the fire.

It is also possible to carry out hot work after confirming that the fire conditions are met and safety precautions are implemented. Both parties must be assigned during the hot work

Security personnel are on site to monitor;

9. The construction vehicle must be equipped with a fire-proof cap when entering the factory. The speed of the vehicle is not more than 5km/h. The factory must be inspected by the staff on duty.

The release of the ex-factory items signed and confirmed by the construction site management personnel of Party A and Party B shall be issued before they can be released;

10. During the construction process, Party A implements a three-level supervision and inspection system for the company, station library and post employees. Party A has the right to inspect at any time and have the right to

End violations, have the right to punish violations of safety regulations or order the construction team to stop work and rectify

11. The garbage generated by Party B during the construction process will be cleaned up as much as possible on the same day. After the completion of construction, Party B shall thoroughly clean up the construction site.

Do the work, finish, and clear the site. The cleaned up garbage cannot be randomly stacked in the site managed by Party A, otherwise it may be based on actual conditions.

Make a fine, deduct some or even all of the risk deposit. Party B shall be responsible for accidents such as pollution and traffic that occur outside the country;

12. Other unfinished matters shall be settled through negotiation between Party A and Party B.

6. Engineering quality and acceptance criteria:

The quality of the project shall comply with the current national construction acceptance specifications, as well as the safety technical requirements and requirements of Party A's engineering projects, and must meet the above-mentioned excellent level of professional quality inspection and evaluation. Because Party B is blind and ruthless, and only seeks speed according to the operation rules, resulting in the project quality not meeting the design safety technical requirements and the quality is unqualified, Party A may request Party B to stop work or rework, and the rework costs shall be borne by Party B, resulting in material waste and Party B shall be responsible for compensation for all economic losses, and the construction period shall not be postponed.

Seven, construction period:

Party B must strictly follow the time or deadline required by the construction plan agreed by Party A and Party B, and complete all construction tasks of the project on time or in advance. If the construction period is delayed, each extension is one day, according to the total settlement price of 5 Pay a fine.

Eight, payment method:

1) The construction cost allocated or settled by Party A according to the actual construction progress completed by Party B;

2) Warranty: The quality guarantee is deducted by 5% of the total cost of the project. After the project is completed and passed the acceptance check for one year, it will be returned according to the actual payment. Party B shall be responsible for the repair due to quality reasons, and the repair cost shall be borne by Party B. During the project warranty period, Party B shall send someone to repair within 3 days after receiving written notice from Party A. Otherwise, Party A may entrust other units or personnel to repair it. The cost shall be deducted by Party A from Party B's warranty, and the insufficient portion shall be paid by Party B.

Nine, other:

1) If Party B terminates this letter of responsibility unilaterally without justified reasons, in addition to the economic losses caused to Party A, Party A shall also pay Party A a penalty of 3% of the total project cost;

2) If Party B violates the above-mentioned relevant agreement in this letter of responsibility, it will not be completed according to the construction period, the quality will not meet the design specifications or safety technical requirements, there are major safety hazards or safety accidents, and other acts that may cause this responsibility to be performed. The party has the right to unilaterally terminate this letter of responsibility and request Party B to clear the field. Party B shall compensate the Party for the economic losses caused by Party A.

X. This Agreement is made in triplicate. Each Party A and Party B shall hold one copy and Party A's safety management department shall maintain one copy with the same legal effect. The letter of responsibility shall come into effect on the date of signature and seal by both parties. After the completion of the project acceptance and handover and completion of the above-mentioned construction project of Party B, the termination of the warranty clause will be terminated.

person A person B

Party A's representative: Party B's representative:

Year, month, day, month, day

Part 2: Security Liability Agreement

Entrusted by: Guangzhou China Coal Jiangnan Foundation Engineering Company Wuhan Branch

Construction unit: Zhang Xiao goods

Project Name: 709 Electronic Technology R&D Experimental Building Pile Foundation Project

First, the general

In order to implement the safety production policy of “safety first, prevention first”, we ensure that there is no accident in the whole construction. In accordance with the relevant policies and regulations of the State's "Safe Production Law", in order to safeguard the legitimate rights and interests of both parties, the contract of safety responsibility is signed on the basis of consensus.

Second, the responsibility of both parties

Party A’s responsibility

1. During the construction process, Party A shall monitor the implementation of Party B's safety production management system, post responsibility system and safety operation procedures, and actively assist Party B to prevent the occurrence of safety accidents during the construction process.

2. Party A's on-site safety construction management representative, in line with the principle of “safety responsibility is more important than Taishan”, actively assists Party B in grasping and managing safety work, and adopts the principle of “three unhappiness” for timely safety hazards. Rectify and formulate safety measures and do your job well.

3. The management representative of Party A, in line with the working principle of “seeking truth from facts”, actively cooperates with Party B to organize, plan and rationally and orderly.

Party B’s responsibility

1. Party B must equip the safety facilities according to the requirements of the superior safety management department and the general contractor, formulate practical and feasible safety construction measures, improve various safety management systems, and implement the safety system and responsibilities to the team and each employee. Sign a safety letter of responsibility with each employee. During the construction period, Party B must actively participate in and accept Party A's safety education and various forms of safety inspection activities, strictly abide by the contractual standards signed by both parties, strictly implement safety operation procedures and various construction safety management systems, and obey the management representative of Party A. Commander must not violate the rules and work hard.

2. Party B shall bear all safety responsibility and safety accident handling costs for this project.

3. Party B shall establish a team of safety management agencies and set up a full-time safety officer to be responsible for the safety management of the project. It is responsible for the key management of safety work such as construction site, building materials, power supply facilities, equipment safety and operation status, underground operation, etc., and coordinate with the safety management personnel of Party A to communicate safety management work.

4. If Party B does not comply with the relevant regulations and the requirements of the general contractor, it shall be equipped with safety equipment; no safety construction measures shall be formulated; the construction process shall not be carried out according to the construction organization design; the normal management of Party A shall not be obeyed, the progress of the project shall be blindly robbed, the operation shall be illegal, Party B assumes all responsibilities and economic losses without any consent from Party A, changes in distribution facilities without authorization, and the production of transportation vehicles is not standardized.

5. During the construction period, Party B shall continuously carry out management education and training for employees on public security regulations, labor discipline, operating procedures and operating systems. Employees are not allowed to fight, fight, drink, and violate the law, causing adverse effects that damage the company's reputation, and all losses and consequences caused by Party B shall be borne by Party B.

6. Party B shall strengthen the key management of the life of the machine team, staff quarters and canteens. It is strictly forbidden to use electric furnaces and arbitrarily connect the wires and other irregular behaviors. Party B employees are not allowed to leave during construction, do not report unauthorized work, do not wear work clothes, and protect from work. Shoes, not wearing a helmet, will be fined 30 yuan a time. Party B shall bear all responsibility and handling expenses for any accidents and safety incidents.

7. Party B must purchase insurance for the employees who go down.

Third, the relevant matters of both parties

This letter of commitment shall become effective on the date of signing by both parties and shall expire within three months after the completion of the project. This letter of commitment is in duplicate, and both parties are responsible for the original copy.

person A person B:

Representative: Representative:

Project Security Officer: Project Security Officer:

Year, month, day, month, day

Part 3: Security Liability Agreement

In order to fully implement the safety production policy of “safety first, prevention first, comprehensive management”, the group company “has the safety concept of “being in the deep abyss like a thin ice”, to increase the investigation and management of hidden dangers, strengthen the safety training of employees, and earnestly implement “posts”. Near management, "team management" and "safety management" to improve the safety of employees' safety work. In the safety work, the first level of the "employee maintenance team, team security team, and team maintenance mine" is formed. Responsible for the safe production management pattern, truly safe work "there are indicators on everyone's head", give full play to the positive role of each employee. In order to implement the safety management system and the post responsibility system to the whole process and every link, to achieve zero accident site and zero accident environment, the district governor and employee safety responsibility agreement shall be formulated to clarify the duties and obligations of both parties and comply with the implementation.

First, the goal of safety responsibility

Obey the rules and discipline, work according to the rules, and the individual has no violations. Seriously carry out the investigation of hidden dangers in the post area to ensure the full standard of production and quality standardization, to ensure that every employee and every post has no accidents.

Second, the responsibilities of both parties

Party A's rights and obligations:

1. Carry out the spirit of the safety meeting of the higher authorities and the requirements for safety work to Party B in a timely manner. In accordance with the relevant laws and regulations of the State, the requirements of the group companies and mines for safety work, clear safety production indicators shall be proposed for Party B's safety work and supervision and assessment shall be conducted.

2. While arranging, inspecting, implementing, appraising and appraising production tasks to Party B, it is necessary to strictly assess standard posts, boutique posts, “everyone is a ventilator”, “post management”, “double-base” construction, and enterprises. Safety culture, refined management implementation.

3. According to the mine's requirements for safe work, provide Party B with complete and reliable safety protection facilities, and check and implement Party B's use of safety facilities.

4. The cadres of the district team went deep into the operation site of Party B to conduct hidden danger investigations, so that employees can understand the risk factors and preventive measures in the workplace. The non-standard behaviors that existed in Party B's safe production operations shall be stopped in a timely manner. Reasonable precautions shall be taken for the safety hazards at the job site and timely resolved.

5, do not violate the rules of the command, do not engage in small contract work when arranging work, do not force Party B to take risks, and provide Party B with cadres, squadrons, and security supervisors.

6. Seriously carry out pre-class safety education, safety exams, and swear to the well, insist on organizing weekly “two and five” safety activities, arrange for Party B to participate in various safety trainings organized by mines, and improve employees' safety awareness and operation level. Self-protection and mutual protection ability to ensure that all types of work permits are valid.

7. For Party B, the phenomenon of serious “three violations” and special strictness “three violations”, as well as work-related injuries caused by irregular operations during the operation, Party B’s personal quarterly safety skills wages are not honored.

Party B's rights and obligations:

1. Comply with national laws and regulations concerning safety production; comply with group companies, mine safety rules and regulations, and labor discipline.

2. Strictly implement the three major procedures, operate according to the rules, standardize operations, and do not violate the rules. Do not harm yourself, harm others, harm others, or supervise others from being harmed by others.

3. Have the right to supervise the safety production of the unit, put forward safety production recommendations, and report safety hazards during the operation.

4. Carefully check the hidden dangers before the start of construction and during the operation, judge and deal with all kinds of hidden dangers, and deal with hidden dangers in the bud.

5. Have the right to refuse orders and opinions that do not meet safety production; in an emergency, they have the right to stop operations and evacuate.

6. Consciously take the initiative to participate in various safety training and learning activities organized by mines, districts, teams, and teams, and properly use labor protection supplies to continuously improve safety awareness, improve operational level, and protect self-protection.

7. Obey the orders of the cadres, safety supervisors, and squadrons in order to ensure that "there is a must, and there is a ban."

8. Strictly implement the ten rights granted to employees by the group company.

Third, assessment and rewards and punishments

Party A has the right to file a complaint with the mine in violation of its duties, and the mine shall be responsible for the investigation and punishment of Party A according to relevant regulations. Party B shall violate the duties and shall be handled by Party A in accordance with the safety assessment requirements of the mine and the unit. According to the severity of the plot, the following treatments are carried out: pre-class inspection, personal safety skill salary account is not honored, deduction of wages, work stoppage or the unit is recommended to open the labor market to wait until the labor contract is terminated.

4. This Agreement shall be made in two copies, one for each of Party A and Party B.

representative of A:

Party B:

unit:

Signing time: Month 2019