[Boutique] construction site internship summary

This article directory 1 construction site internship summary 2 construction site internship summary 3 construction site internship summary Section 1: construction site internship summary

The internship unit I participated in was the installation of the 7th Engineering Bureau of China Construction. The company was mainly responsible for the installation of the water supply and drainage pipes and fire-fighting pipelines of Block F. The installation of strong and weak circuits was subcontracted to another construction unit. The concrete project was followed by a relative in the third phase. There are not many contacts in the G-study project. Since I am not studying the water supply and drainage project, the project department leader asked me to be responsible for modifying the electronic version of the construction drawing in the data section of the project department. It is to mark the construction progress with the lines of the original drawings on the electronic version of the construction drawing. I am required to enter the construction site under the guidance of someone and introduce a professional construction engineer to do my technical guidance. With the help of the master and other staff in the office, I use my spare time to learn from the most basic knowledge of the water supply and drainage project. From understanding the water supply and drainage signs to familiarizing with the drawings, and then entering the site to understand the installation layout and installation methods. I just felt very strange and inactive in the industry of water supply and drainage. In a special case of inter-study, such as the separation of water conservancy projects to civil engineering, I have just begun to learn the technical difficulties of various types of engineering operations. After all, the majors studied. It is quite different from the work you are doing. It is relatively easy to see the drawings. The knowledge arranged in the course arranged by the school is a test of the course I have studied. It further enhances my imagination of space and improves my ability to read engineering drawings. A builder who learns to look at a picture is like learning to speak first in life. In other respects, I quickly grasped the construction requirements and construction techniques by borrowing professional books and familiarizing with the construction plan. I also mastered the skills and methods of operation technology through the guidance of the master. After that, I began to have a little familiarity with the work I was doing. . However, new problems have arisen. How to deal with certain technical operations? It is an urgent problem that I need to solve. In order to solve this problem, I actively work hard on the construction site during the day. The master asked, because they have a long time in a certain technical operation and have a unique idea of ​​the handling of a certain technical operation, they also provided very great support and technical support for the technical processing problems I asked. solution. In the evening, I searched the relevant technical materials in the computer of the security office and asked the duty teacher to ask me about the problems encountered during the day, record his rationale for dealing with technical problems, integrate them, and communicate with the master after passing the approval. The technical processing problems will be solved, and the experience of this study will be summed up. After going to work, I have to take such measures and study hard. The master said that my adaptability is still a bit worse, the adaptation time is too long, it will affect the future work, I will seriously adjust the adjustment of the state of learning, and strive to adapt quickly after the next formal work. During the internship, the calculation, blanking, docking, and suspension of the material usage of the water supply and drainage project; the calculation, selection, production, installation, and calibration level of the iron plate usage of the bridge project, I participated in all the engineering links, and carried out The actual hands-on operation and detailed operation technical records, through a period of time, the materials of each type of engineering are familiar with and master the installation process. I have a deeper understanding of learning and operation techniques.

Of course, in terms of construction technology, because of the professional transformation, some problems involving experience make me often go wrong, and how to make the construction technology experience no longer wrong? It is another problem that I am facing. I actively asked the construction workers and the person in charge of various types of work. With the help of their guidance, the difficult problems were solved. To deepen my understanding of the work, I carefully recorded the technical construction projects I had carried out. Let the construction workers make technical guidance and suggestions. In order to truly master this technology, only participate in the construction of various types of work, so that the construction technology experience can be stabilized and perfected. Because I am an internship, the time and space on the construction site are very restrictive. So I only have a preliminary understanding of the installation project. As for the details, I have to continue learning after work. In the construction organization management, the school opened this course, but after entering the work, there were problems. A series of construction organizations did not understand much. For example, at first I didn't understand its process. Under the guidance of the master, through the familiarity and understanding of the construction organization design, it is learned that its rules are gradual interlocking. In order to hold this rule, I seriously participate in every construction organization issued by the construction workers. The instructions, and the drafting of the construction instructions, after personal practice, this rule was quickly mastered by me, but in this internship, the construction organization instructions I prepared were not adopted by engineers and construction workers, they said my instructions In terms of the completion efficiency of the project schedule and the achievement of the quality of the project, only the quality is ignored, the construction progress is neglected, the consideration is not comprehensive, the progress and quality of the project must go hand in hand, and the exercise and learning should be strengthened. The ability in this aspect needs to be improved.

In a special case of transition from hydraulic engineering to civil engineering, after more than a month of internship, although there is no great stability and mastery of professional skills, it has basically adapted from the professional transformation. I hope that in the future work, I will pay more attention to learning and mastering the construction technology and relevant construction specifications and quality assessment standards of various types of work, and strive to enrich the professional skills of the students.

I went back to the construction site and personally participated in the construction guidance work. I felt very fulfilled because it was the first time in my student life that I turned theoretical knowledge into a large-scale life product for people, but this time it was It is so different, he will comprehensively test my ability in all aspects, comprehensively test whether I can use the theoretical knowledge I have learned in practice. I am confident that I will be based on this challenging society in the future. I have taken every serious thing during the internship. If I don’t understand, I will ask others, carefully ponder, and constantly arm myself with knowledge. The intense internship life of more than a month has ended. I have had a lot of gains in this more than a month. At least this internship gave me the confidence to walk into the work unit. I used to worry about going to the unit. Nothing can be done, the school is smeared, and now you can rest assured that you are contributing to socialism. The internship life arrangements are intense, orderly, fulfilling and meaningful. Let me know deeply that the construction site is not so tedious as I had imagined before. Everyone on the construction site is full of hope, nervous and happy life. On-site construction is a very labor-intensive work. Working overtime at night is still a bit too much for me to get out of school. The leaders and masters of the unit have a lot of care for me. I don’t ask me to work overtime. I have the same normal work as the owners. During the break, I just took me to the scene to participate in the actual operation and introduced me to follow the construction personnel to install the pipeline. The messy place still won't let me go, but an adult is difficult to be inclusive. I made it into a successful person, so I did the same with the construction workers. In the afternoon, I arranged for the paperwork in the office. I arranged a six-day class a week, and I took a day off! I occasionally went to the office to work overtime, staying up late, Make a foundation for future work. Through practice, I have learned a lot of practical knowledge. Through internships to understand the construction process, familiar with the structure of the house, understand the characteristics of the building materials, and apply the theoretical knowledge learned in the school one by one into personal skills. Through observation and learning, I have learned the whole building construction process and learned a lot. Very specific concrete construction knowledge: such as concrete mixing and curing, this knowledge is often my school. We can only speculate and imagine through textbook content and standard data, there are very few actual contacts, and we are often overlooked by us. The very important basic knowledge was regained by me during this internship.

Part 2: Summary of construction site internship

First, the practice overview

I am a XXX. In order to understand the practical operation ability well, I will fully integrate the theoretical knowledge into the work practice. In March 2019, I entered the XXX site for an internship. The construction site consists of a comprehensive building and 82 condominium villas; the building area is 77138.16m2, the structure type is frame structure, and the building floor has three floors above ground. Second, the internship content 1. Measurement release line

The determination of the location of the building is quite important. Before the house is excavated, the total station is used to make the house excavation position according to the reference coordinates given by the Bureau of Surveying and Mapping. The master said that this construction method is much faster than the previous theodolite, and the accuracy is also much higher. When the base pit is deep, the gantry is placed. It takes 2 hours for a house. Now it takes only 20 minutes. Can be done. For the villa, a house is measured three times, one determines the excavation position, two determines the position of the cushion, and three determines the position of the axis. Determining the position of the axis is the most important construction link. The master said that the tolerance is ±2 seconds, ±0.003m. The main points should be noted:

The outer axis is used as the basic vertical and horizontal line, and the absolute elevation is taken as ±0. 00 elevation, respectively, and the basic axis elevation is led to the adjacent building.

Vertical measurement of the building.

A: Establish an auxiliary axis control network.

B: Establish a construction line control network, and draw a construction line such as a wall edge line and a column edge line according to the auxiliary axis control network.

Building level elevation measurement.

Elevation control of the building. Using the stratified transfer method, the elevation of the building is led to the vertical reinforcement surface of the first column according to the ±0. 00 elevation line, and the measurement is transmitted upwards in this layer. Basic engineering:

Foundation engineering is the most critical part of every building, and it directly affects the quality of the project. And the technical content of the basic part is also very high. The basic part of the project includes earthwork excavation, drainage, raft foundation construction, floor concrete

2. Concrete engineering

Template design

Construction preparation

1. Basic work before template installation:

1) Discharge: Firstly, the side column of the building, the axis of the wall, and the axis are taken as the starting point, and the axes are drawn. When the template is laid, the center line and the edge line of the template are ejected by the ink line according to the construction drawing. The wall template should eject the edge line and the outer control line of the template to facilitate template installation and correction.

2) The level of the building level is directly measured to the template installation position according to the requirements of the actual elevation.

3) The bottom position of the template pad should be leveled in advance, and the debris should be cleaned to ensure the correct position of the template, preventing the bottom of the template from leaking or the roots after the concrete is formed.

4) The team leader determines the assembly design plan of the template in advance, and carries out the technical, quality and safety of the construction team.

5) The template should be brushed release agent, concrete engineering

The quality of concrete has a great influence on the safety of the structure and the cost of the structure. Therefore, we must pay sufficient attention to the construction quality of the concrete during construction.

1). Job preparation:

Before pouring, the garbage, dirt and other debris in the formwork and the oil on the steel bars should be cleaned up, and the cement blocks of the steel bars should be inspected. If the wood formwork is used, watering should be used to wet the formwork. The high level of the cleansing port of the column formwork is sealed after removing the sundries.

Concrete mixing on site:

Self-mixing cockroaches are used to prevent the temporary supply of goods and the on-site mixing of sporadic cockroaches. The raw materials and mix ratio should be consistent with the 砼.

3), the maintenance of concrete

The early curing of concrete should aim at maintaining suitable temperature and humidity conditions to achieve two effects: on the one hand, the concrete is protected from unfavorable temperature and humidity deformation, and harmful cold shrinkage and shrinkage are prevented. On the other hand, the cement hydration is carried out smoothly in order to achieve the design strength and crack resistance.

Theoretically, the water content in the newly poured concrete can fully meet the requirements of cement hydration. However, due to evaporation and other reasons often cause water loss, thereby delaying or hindering the hydration of cement, surface concrete is the easiest and directly affected by this adverse effect. Therefore, the first few days after concrete pouring is a critical period of maintenance, and should be paid attention to during construction.

Therefore, we must be cautious in handling these events during construction, depending on the situation.

These problems are all noticed in the construction work. What kind of cement is used in the construction, the amount should be paid attention to, and the early maintenance of the concrete.

Three: Harvest and experience

First of all, the internship is a familiar and unfamiliar word for me, because I have experienced many internships in my student life for more than ten years, but this time it is so different. He will comprehensively test my ability in all aspects: study, life, psychology, body, thought and so on. It is like a touchstone to test whether I can apply the theoretical knowledge I have learned in practice. It is also the key to building confidence in my future whether I can successfully settle in this challenging society. Therefore, my investment in it is also 100%! The tense three-month internship life is over, in this one I still have a lot of gains in the month. It is necessary to sum up after the internship. First of all, through more than three months of internship, through practice, I learned a lot of practical knowledge. The so-called practice is the only criterion for testing the truth. Through the side station, I have observed the construction process of the whole house from a close distance, and learned a lot of concrete construction knowledge that is very applicable. This knowledge is often my little contact at school, very few. Attention, but it is a very basic knowledge.

Part 3: Summary of construction site internship

As a contemporary college student, internship is a particularly important part of the university stage. It is a comprehensive application of the knowledge we have learned at the university level. It not only makes our knowledge of all aspects systematic, but also makes the knowledge we have learned practical. Especially for civil engineering, through the on-the-spot visit, we have a huge understanding of the construction site and construction system of civil engineering, so that students can have a connection between theoretical knowledge and practice in understanding, understand civil engineering architecture, structure, The basic knowledge of construction, establishes a preliminary engineering awareness, stimulates our curiosity about the civil engineering follow-up courses, and lays the foundation for perceptual knowledge for the basic courses and professional courses. Learn more about civil engineering, develop students to love the profession, and increase self-confidence in learning and engaging in the profession.

My company was contracted by the Shenyang Lingkong Tourist Area Management Committee. Although I only stayed there for one day, I basically visited the working conditions there and gave me a new understanding of life.

Although the internship was not long, I was exposed to many things I had never known before. Much of the knowledge was previously unseen in books. Through this internship, I have strengthened my practical ability, left the book, and finally came to the construction site to really feel the necessity of the internship, and also made me realize that the basic knowledge is not solid. During the internship, I found that our profession has a lot of room for exploration and development. During the internship, I saw the secondary use of construction materials. This aspect is related to the workers' awareness of saving. On the one hand, it is also related to the overall management of the supervisors. If resources can be effectively saved, then more economic benefits may be generated. . However, some construction waste is piled up inside and outside the construction site. The stacking of these construction wastes is not beautiful and pollutes the environment. Whether or not these construction wastes can be recycled and turned into waste is also a problem we can study. In short, at present, I believe that many projects still have shortcomings in construction management. I also hope that I can explore more and better and more effective organizational management methods in the future study. After work, I will use them to make excellent engineering.

In this short internship, I consolidated the theoretical knowledge I learned during my school years. In school, there is a big difference between theory and practice. Some knowledge is often seen in the learning process of the school. It can be mastered and used in a short period of time, but it is not fully understood and digested, or it is not known. What to apply in the actual construction. However, there is still a part of the knowledge is more abstract, no practice is not easy to remember, let alone master the use. Therefore, although the content taught by the teacher is multi-faceted, wide and broad, what we have learned is only a part of it, or something that is fur. If we really want to master all the theoretical knowledge, only through actual study and visit. achieve.

After understanding the internship, I realized that the construction industry is a very challenging industry. If you can work in this industry in the future, it will be a great challenge for yourself. Therefore, I have given myself the pressure to stop thinking that I have nothing to do, let myself study with peace of mind and lay a solid foundation for future work. Enhance your communication skills. The construction industry is an industry that involves a lot of people, and you will be exposed to a wide variety of people. Faced with such a complicated social circle, you can learn a lot of excellent Dorsey from them, remove some bad behaviors from yourself, and at the same time, you can enhance your communication skills through different contact objects and let yourself be Be more confident and stronger in the future life!

With this period of exercise, no matter what kind of work I do in the future, I have a kind of perseverance and hard work, and I have learned to adapt to the environment. In addition, I knew some problems on the construction site that were different from the school. I knew on the construction site how to be a technician and how to communicate with the workers. Moreover, this internship has achieved the goal of making books and hard knowledge and physical connections. We not only learned some new knowledge, but also consolidated the theoretical knowledge we learned during our school years. In the past, some construction technical points were only a rough knowledge of the construction points, but the specific construction links and specific construction steps were poorly understood. However, after the internship, the construction techniques seen during this period were preliminary. Understand their specific links and detailed steps, which not only improve their theoretical level, but also enhance their practical ability. Through understanding the internship, I have strengthened my enthusiasm for the profession and made myself more interested in creating a world in the construction industry in the future.

Since I am a student studying safety engineering, I only express my own feelings on the safety issues on the construction site as follows. First of all, the local master gave me the importance of safe construction and asked me to have a strong sense of self-protection after entering the construction site. Because of their attitude towards safety and prudence, they can see that they attach importance to safety. Safety signs are everywhere on the construction site. Every staff member on the construction site also wears complete safety protection tools. Because of the different division of labor in the construction site. There are also subtle gaps in wearing safety gear. One project is to serve people and benefit people. If the project is a black hand for people’s names because of the ineffective supervision of the relevant personnel and some supervisors, then we would rather give up. This project retains precious life. The safety of the enterprise is not a blessing. Safety production is the biggest benefit of the enterprise and the guarantee for the survival of the enterprise. Increase investment in security, and some may think that increasing the cost of the company, reducing revenue and profits. This kind of irresponsible point of view, security investment should not be the burden of enterprises, and it does not produce a negative benefit.

Enterprises become safe and lose their accidents. Any accident is an irreparable loss to the enterprise, and it is irreparable to the family and the individual. Safety awareness should always be firmly rooted in everyone's heart, let everyone know that if the responsibility is not in place, it will lead to an accident. Correctly recognize that security is not a problem for one person, but that you have me, I have you, is a The links of up and down, mutual protection, and interlocking are a complex and closely connected network. Many painful cases all reflect the lack of our safety education. The publicity of safety knowledge still has great defects. Our safety management system is still so fragile!

"Safety is the benefit", this view should be rooted in everyone's heart. First of all, arm yourself, familiarize yourself with the safety rules of the operating procedures, and carefully study the relevant laws and regulations on safety; secondly, develop good safety practices, eliminate habitual violations, and dare to behave with the unsafe acts of the superiors and even the superiors; The third is to diligently check and discover the hidden dangers of rectification accidents in time. There are many hidden dangers and dead ends in the frontline, and habitual violations are more common. If it is only safe in terms of form and coping with inspections, even if the investment is large and the effort is paid, the security environment cannot be improved in essence, and the safety management level can never be obtained. Elevation of nature! If every employee supervises, reminds each other, checks each other in daily work, finds loopholes and weak links, prevents unsafe factors from being present, eliminates hidden dangers, and builds a safe levee from small things. . No danger, no damage, no damage. Safety means that in the process of life and production, life is guaranteed, the body is protected from harm, and property is protected from loss.

Everyone pays attention to safety, always pays attention to safety, keeps "safe production" in mind, obeys the rules of operation rules and keeps the law of safe production! Everyone knows clearly that violations are toward accidents. It is to hurt yourself, hurt others, and even go to death. Don't have any luck, because perhaps a small casual violation will cause a lot of damage or loss, and it will become illegal. If each of us can truly realize this, then our safe production work will be able to do better, the enterprise will be prosperous, and we can live happily in a safe and harmonious environment.

The internship is over. I believe that I will experience more things in my future work and study, and I believe that my professional level will become better and better with unremitting efforts. I firmly believe that through this period of internship, the practical experience I have gained will benefit my life. I will continue to be verified in my actual work after graduation. I will continue to understand and understand the knowledge I have learned in the internship in the future. In my work, I will continue to apply the theoretical knowledge and practical experience I have learned to practical work, fully demonstrating my personal and life values. To achieve self-ideal and bright future efforts!