[Boutique] factory internship report essay

Part 1: Factory Internship Report Model

I studied at Jingchu Institute of Technology, a bachelor's degree in computer science and technology. I am 20 years old. I went to Wuhan Midea Industrial Park for a winter vacation internship with 20 people from our school. In the process, we have too much emotion. Moved with.

In the cold winter, we took a heavy salute to enter the beautiful industrial park. It is located in a remote village in Hanyang District, Wuhan, named Happy Village. After entering the factory, we handled all the admission procedures in the form of queues. I admire those students who can come out to work during the winter vacation, especially those who have weathered the younger brothers and younger sisters.

The morning was slightly bright, the alarm clock called our tired body, hurriedly ate breakfast and ran to the factory, we repeated the same action over and over again in their respective positions, and started to be curious and fresh, everyone did not feel how Tired, two days later, I heard complaints from the work. Some students dismissed because they could not hold on, and the rest prepared for a month. There is a 40-minute meal time at noon, no break at work, 11 hours of work per day, so mechanical work is busy and boring, and several times I am working in a subconscious mind. It seems that in the dream, the leave is halfway, fortunately we And the music in the mobile phone companion, plus we can laugh and chat in order to be able to send this terrible time, a smile every day to work, a smile from work, although my heart is very upset, only to endure.

In the factory:

Long working hours, short breaks, no mention of salary and time on the contract, always find reasons to deduct, many details are too vague, the company communicates up and down, deceives employees, shirks responsibility and tries to find out from them. Profit, even if you buy a broom, you have to pay for your own money, especially if the food is unpalatable and the quantity is small. This is my most depressed.

Employees:

No matter what you do, you have to listen to the arrangements in the factory, you will be threatened without paying wages. It is impossible to take time off, eat and grab, and the way you eat is even more terrible. The nature of human beings is so powerfully destroyed by this factory. They want to get everything for production and what they want, employees can only work hard and silently, and how much wages can be unknown in the end!

Really me

Since I decided to come here, I didn’t have any money for a short period of 30 days. I just wanted to feel a little more. I walked all the way to understand what the so-called cruel reality I always heard in my ear. As a college student, we stayed in the small circle of school all day long and always thought that the people around us are so kind, so calm, naturally they will not think of the outside society, so when you first step into the society, you will meet Unbelievable troubles, the current practice has laid the foundation for you to stand up early, so I don’t feel any loss at all. Besides, when I go back to school, I think of those sufferings, and you are too embarrassed to be as arrogant as it used to be. This is the source of power...

Unforgettable

We all came from different distances. During this time, we talked and laughed. Inadvertently, girls became good sisters. Men formed good brothers. Although the time was short, the feelings they saw in their eyes were so true. When I left, all the tears were divided. How did the scene move? The unforgettable moment is worth remembering for a lifetime. I hope that my friends will remember each other after a few years because I In the past, I have harvested something more valuable than money: friendship.

Social practice is to apply the theoretical knowledge we have learned in school to objective reality, so that the theoretical knowledge we have learned can be useful. If you only learn not to practice, then what you learn is equal to zero. Theory should be combined with practice. On the other hand, practice can lay the foundation for finding a job in the future. Through this internship during this time, I learned something I couldn't learn at school. Because of the different environments, people who come into contact with things are different, and what they learn from them is naturally different. Learn to learn from practice and practice from learning. Moreover, China's economy has developed rapidly and joined the WTO. The domestic and international economies are changing day by day. Every day, new things are emerging. When there are more and more opportunities, there are more challenges. The day before yesterday, I just learned. The knowledge that has arrived may have been eliminated today. The more China's economy is connected with the outside world, the higher the demand for talents. We don't just learn the knowledge we have learned in school, we must continue to live from life. In the practice of other knowledge in the middle school, we will continue to arm ourselves from all aspects in order to stand out in the competition and express ourselves.

Here we have joys and sorrows, and there are gains and losses. This internship has inspired our souls. It will inspire us to move forward as a driving force for our life and learning, and to give birth to a heart that never fails!

Part 2: Factory Internship Report Fan Wen

First is the CNC machine tool. At the beginning, we learned the programming of CNC lathes by the teacher under the guidance of the teacher. Because it is computer operation, we must first learn the language, instructions, etc. that the computer can recognize, so that we can correctly input the commands to control the computer and get what we need. The product. After writing the program, we can watch the simulation, know in advance whether the program meets the requirements and standards, and finally touch the machine tool, input the programmed program into the CNC machine tool, everything is automated, and the parts are quickly processed. , in line with our requirements, so CNC machine tools are very modern. It is said that the development and replacement of CNC machine tools is almost synchronous with the development of computers.

Then there is the fitter. The fitter is mainly manual, and uses various tools to complete the parts processing, assembly and repair work. The job we have to do is to round the round metal block into a five-pointed star with various enamels. Under the guidance of the teacher, we learned about punching, spiraling, and assembly. The whole process is all manual, so all the work is physical. Everyone felt very simple when the teacher explained, but the actual process was quite different. In general, the process is hard, but the results are gratifying. One day of dripping sweat, I finally got a delicate five-pointed star, watching the bright five-pointed star, the fatigue of the day swept away. Afterwards, I realized that the back of my hand had swollen into a steamed buns, and it was good after a week. The fourth time is casting and welding. The welding is divided into fusion welding, pressure welding and brazing. The purpose of welding is to weld two separate metals together. We are divided into two groups. In the afternoon, we first practice welding. According to the teacher's test guidelines, we welded a weld. First, wear protective clothing, leather gloves, and eye mask. Then, I put the electrode on the metal plate. Ignite, start at the welding place, keep the height of the electrode and metal 2~4mm, about 70~80 degrees perpendicular to the seam; finally, slowly feed the welding rod into the seam, and a weld seam will be released. Tap the iron oxide with a hammer so that the weld is more integrated with the metal. The teacher gave us a rating based on the uniformity of the weld. Finally, I got a b. It feels good. After all, I am a girl. I can't learn much essence in just three hours, so I am very satisfied with my results. Just like the teacher praised, girls are not worse than boys, but do better than boys. This year's Beijing Olympic Games, in which the Beijing Olympic Bird's Nest is melt welded and welded.

In the evening, we started casting, and casting refers to the melting chain metal. The casting process is carried out, and the molten metal is poured into the mold, and after solidification, a molding method for castings of a certain shape and performance is obtained, which is a blank process of the product and the part. Casting is divided into special casting and widely used sand casting. Among them, sand casting has manual molding and machine modeling. We learn to operate by hand molding, and the focus is on how to shape. Using the sand to make the model, we follow the teacher's steps step by step, and make a big model. This is obviously not a child playing with sand, but a very careful thing, because the sand is easily deformed, so when doing Be careful.

Finally, milling, milling is divided into down milling and up milling. It is also a machine tool operation, I think this is the simplest type of work. In the evening, we also saw the CNC technology. The CNC wire cutting technology is to use the programmed program to cut various small workpieces by wire discharge. The work we have to do is to design the workpiece and place the workpiece. Other things are handed over to the computer. The accuracy is high, but the speed is relatively slow. I didn't know how many elaborate parts and patterns were produced before. I saw the products produced by CNC technology, which is really open to the eye! The level is so high, it is so exciting! It also makes me think that such advanced equipment, such superior learning conditions, I must make full use of this and reserve a certain amount of energy for myself!

For the first time in my life, I have a feeling of "learning to use it." I feel very fulfilled in my heart. I also truly understand that truth must be tested by practice, and I don't try it myself. There are many things that are not in the book. Only in practice can you get it. The discussion on paper will only lead people into the wrong zone, and practice is the teacher forever. The phrase "painful and happy" is used to describe this metalworking internship. It is not only an experience, it also brings us not only experience, but also cultivates our hard-working spirit and rigorous and serious style. "The paper has come to the end and feels shallow.

Part 3: Factory Internship Report Model

Internship time: xxx

Internship location: xxx

Internship content: Understand the operation process of each workshop in each factory, and the work to be coordinated in the future.

to sum up:

Through two days of short-term internships, I basically understand the basic operations of each workshop. Below is my detailed record, please refer to the guide!

On the afternoon of August 15, the internship department was the production department. The main workshops were the packaging workshop and the flat workshop. The relevant person in charge is Zou Mingjiang. The internship content is mainly to understand the operation process in the workshop, the production process, process and standards of the CD package.

In the packaging workshop, I first saw the packaging process of CD bags and computer bags. The packaging method of the CD package and the computer bag are similar. The finished products are shipped from the flat workshop, and the system is packaged. In the process, through QC careful inspection, it can be shipped to dealers everywhere. This is the most important part before shipment. So I carefully look at each person's operation method and draw a systematic conclusion: CD finished product - unpacking - wiping dust - flanging - adding inner paper shell - adding desiccant - plus outer packaging - packing - packing . This series of processes is the basic operational process of the entire packaging workshop. In the workshop, I first check the work of the team members in each group, and carefully check the work links in their hands, and also ask some questions that I don't know much. Each of their team members, the division of labor is very detailed, the operation is relatively simple, almost a simple operation is repeated in one day, which is the manual work of each group member. They are a group consisting of team leaders, helpers, and team members. After the team members have finished the manual pieces, the help personnel will transport the other originals to the team members. The team leader arranges the work of each team member and checks whether the members of each team member meet the standards. Their standard of compliance is based on the standard of the sample package, workmanship, fine work on each side, and the method of edging and the place where the error will occur. Their operational process: the sample package is subdivided according to the raw materials supplied by the loading plant. Assigned to each group member, and arrange each part of the manual work by category. Through the internship in this workshop, I basically recognized the production process of the CD package.

The next morning, the internship department: CD room and development department. The relevant persons in charge of the internship are: Guo Zhong and Hou Xuebing. The content of the internship is: understand the production process, model, material, etc. of the inner page and understand the operation process of the model house, the proofing program and the work to be done later.

The main job of the CD room is to make the inner pages of the CD, including the internal page models in the CD package. The inner page models of the CD package are used to produce various types of CD inner pages in the CD kit. Such as PP-F2P, PP-EP, PP-F4P, PP-F8P, PP-F8B and other models. The translucent plastic film on the inside of the CD is divided into matt and bright light in a professional angle. The matt is thicker than the bright light, and the quality is better than the bright light. The inner pages of the models produced by them are subdivided by other groups, such as welding, spreading pages, wearing pages, packaging and so on. Welding is done by an ultrasonic machine. The basic process of the entire workshop is probably like this. In the development department, you can see the entire process of a CD package\computer package. From the template map or the model package, the designers can draw various model modules, and after the glue is applied by the team members, the other members can complete the detailed work in the workshop. The only difference is that in the development department, the link is completed by one person. . The process is more elaborate.

In the afternoon of the next day, the internship departments included: computer package workshop and material warehouse. The relevant interns were: Lu Junlong and Yang Junshan. Internships include: understanding the production process, process, quality and standards of the computer bag and understanding the workflow of materials, materials and material warehouses.

In the computer package workshop, most of the operations seen are similar to those of the CD room. However, the computer package is more complicated than the CD package. Some complex sample packages may require one or two hundred team members to complete. The main process is to subdivide the sample package according to the raw materials supplied by the loading plant. Assigned to each team member, and each team member is arranged by category to do the manual work of each link to complete the production process of the entire computer bag. In production, the supervisor and the team leader will arrange the work of each team member and check whether the members of each team member meet the standards. Their standards of compliance are based on the standards of the sample package, the workmanship, the finishing work on each side, the hem and the place where the error will occur. Through this workshop, I basically understand a production process of the computer bag. In the material warehouse, you have a basic understanding of the raw materials required for CD bags and computer bags. And the material contained in the CD, the raw materials of the mouse pad, and the like. Their workflow is a sample package that subdivides the required raw materials through the PMC department to the corresponding workshops and material warehouses, which are supplied to the workshops by material warehouse stocking and sorting.

On the third day, the internship department consisted of the PMC department and the internal trade warehouse. Relevant responsible persons are: He Yuhong and Liu Shu. The contents of the internship are: understanding the functions of the department staff, familiarizing with the department's processes and the need to fully work in the future and understanding the internal trade warehouse workflow, shipping process, requirements, etc.

The main function of the PMC Department is the shipment order from the Ministry of Internal Trade and the Ministry of Foreign Trade. In their part, each member is subdivided into workshops to confirm the raw materials or raw materials needed for the shipment and to determine The corresponding delivery time, and follow-up of the production process.

The internal trade warehouse is the last channel that our domestic trade department gives to dealers. The goods here come from various production departments. The number of product specifications of the internal trade warehouse is provided by the domestic trade department's shipper. When the salesman of the Ministry of Internal Trade is on the shipper, he will make a corresponding statement through the finance of the internal trade warehouse. Give Liu Shu the goods needed in the order and send them to the corresponding dealers through the shipping company.

The above is my internship in the xx group factory, please consult the leaders.