Summary of the year-end work of the workshop in 2019
Years are like a shuttle, time is awkward. It is another winter to go. In this day of resigning the old and welcoming the new, looking back at the work, there is a lot of mixed feelings. With the care and support of leaders at all levels, great progress has been made in all work. Now make a brief summary from both the pull crystal and construction supervision.
A brief review of the work of pulling crystals in the first and twelfth years began in October 1997, and has been in existence for twelve years. From the three Xibei furnaces to open the crystal, to the old 8 workshops, after the installation of Jinglong Songgong to the electronic materials, Songgong v workshop. Years of vicissitudes, advancing with the times, the perimeter of each single crystal furnace has left my footprint of operation and maintenance. Twelve years have taught many apprentices. According to incomplete statistics, there are 21 batches of apprentices from the factory to the disciples. A total of 37 people. Recently taught is excellence and Yufeng. Among the apprentices, there are 2 ministers and 5 directors. There are also technical backbones or senior executives who go to the group and other units within the group. During the 12 years, I have made great achievements in pulling crystal, maintenance, team management, statistical summary, process research and development, equipment inspection, and engineering supervision. Has accumulated a wealth of process experience and management experience. I participated in several special trainings to charge myself. During the 12 years of work, I used the convenience of being close to home, and made many special nights to repair the stove and solve the problem of pulling crystal. One is not afraid of suffering, the second is not afraid of tiredness, the third does not pay remuneration, the fourth does not figure up, and the work has been obscure for more than 12 years.
Second, the work of the R&D center in the first half of the year The financial crisis did not affect the development of R&D in XX. From the sixth day of the first month of the first month, the equipment company's self-produced 90 furnaces and self-produced control cabinets were commissioned, and the ccd automatic diameter control experiment was carried out, and certain results were obtained. It has laid a theoretical foundation and practical experience for the normal operation of the fully automatic single crystal furnace. The experiments and scale production of 6-inch, 6.5-inch, 8-inch and 9-inch single crystals were successfully completed in the 8018, 8020, 9020, and 9022 thermal systems. Data on single crystal oxygen carbon content, lifetime and attenuation were scientifically analyzed. The comparison calculates the best cost of production costs, especially electricity consumption. Completed the magnetic field pulling, the molybdenum diversion tube and the tungsten wire rope pulling crystal innovation project. And the improvement of the production process such as changing the crystal turn, changing the cooling method and the innovation to improve the life of the single crystal minority have achieved certain results. It has made certain contributions to the reform and innovation of the crystal pulling process and energy saving.
3. Supervision of multiple construction quality in the second half of the year In the second half of the year, the full-time tracking quality inspection of 28 construction projects in four major categories of the production department was carried out.
1. The supervision of the civil engineering of the v workshop has been facing the unfamiliar industry since accepting the civil engineering of the v workshop on June 9th, and strives to carry forward the spirit of hard work, study, and dedication. I know very well that if you want to supervise well, you must not only understand but also improve yourself. So I first learned from the picture, and spent 2 days reading all the engineering drawings. In order to be able to keep abreast of the engineering situation and problems in the construction. I went to the factory half an hour earlier every morning, and went to the construction site of the i workshop, the iii workshop and the v workshop where I was responsible, and found that the problem was solved in time. Go to the office of Minister Zhang to report to the work before 8:10 every day. In order to do a better job, I set my own schedule, strictly demand myself, and work overtime according to the progress of the project. In the summer for one and a half months, basically after 5 o'clock after work, I worked overtime to 7 o'clock and the construction team to get off work. In addition to completing the supervision work, I also helped the director complete the statistics of the water pipe fittings in the iv workshop, summarize, analyze and reserve the materials for the v workshop. Waiting for work. And timely and efficiently complete other tasks assigned by the leadership. Work overtime every night to learn cad drawings, see a variety of architectural books and online materials. In this way, it supervised the completion of 80 sets of single crystal furnace foundation, 80 vacuum pump foundations, 12 cooling tower foundations, 2 ar tank foundations, 3 transformer foundations and power distribution room indoor equipment, and iii workshops for dilapidated buildings and other civil engineering projects. . Every day's work done by each civil construction was measured and compared with the drawings. Many problems were found. Many coordination problems were solved by the construction leaders themselves, and some reports were reported to the leaders for resolution. The company has reduced the unnecessary losses caused by civil construction errors and further improved the quality of the project.
2. Supervision of steel structure platform and circulating waterway welding.
I successfully supervised the completion of the steel platform of the workshop xx square meter steel platform and power distribution room of 400 square meters, as well as the steel ladder and small steel platform of each pump room; completed the welding supervision of the pure water and tap water pipeline of the circulating waterway of the v workshop; completed the vacuum pump Welding construction inspection of the room, board changing pump room, pipeline pump room, and refrigeration machine room pipeline; and welding construction inspection of pure water and tap water pipeline of i workshop. I have carefully supervised them one by one. In order to better check the quality of derusting, welding and painting, I have self-study of steel structure, welding quality inspection standards, grade classification standards for welds and inspection and treatment of common welding defects, and standards for derusting grades st2 and st3. Mastered the specifications of welding defects and descaling grades, and applied them to the inspection quality during construction to further improve the construction quality.
3, decoration ceiling and self-leveling resin ground engineering supervision I supervised the completion of the iii workshop ceiling replacement, and v workshop wall decoration and ceiling. It has formed a good friendship with Jiangsu Colorful Decoration Company. With Yangzhou Baoli Resin Ground Co., Ltd., the self-leveling resin floor of the v-station steel platform was completed, as well as the construction inspection of the resin floor of the furnace table, the lower floor of the workshop, the vacuum pump room, the air conditioner room and the epoxy frp inner wall of the pure pool. Many quality issues have been identified. It eliminates the drawbacks of construction work-saving, materialization, and speed in time. The company saved the losses and improved the construction quality.
4. Quality inspection of installation and commissioning of supporting equipment I strictly inspect the installation and commissioning quality of cooling towers, argon gas tanks, high and low pressure copper platoons, plate exchange and circulation pumps, transformers, chillers, central air conditioners and ducts. In particular, the cooling tower includes the i workshop and the v workshop, and the central air conditioner includes the inspection of the iii workshop and the v workshop duct. I found out more than 20 problems with the cooling tower. Many consultations have been held with the Asia Pacific Group, and most of the issues have been resolved and individual issues are being resolved. Air-conditioning ducts are even more of a headache. In order to ensure quality and dust, we have changed the air duct to an organic inner layer. However, the current domestic production process is still immature, and no manufacturer's ducts are qualified. Faced with this reality, I look at the real thing and look for problems with Shandong Dezhou Asia Pacific Group and Shijiazhuang Centuryda Company. Re-establish the inspection standards, on-site tensile test, and acid resistance test requirements. The 228 organic air ducts in the iii workshop and the 230 organic air ducts in the fifth workshop were inspected and numbered. The inorganic ducts were also inspected one by one. Organic repair of the patch, the redo of the redo, the qualification test can only be installed after the number is written. In order to achieve this goal, I have worked overtime many times. In order to catch up with the construction period, I did not accidentally install it, and in the latter half of the night, I took the rain twice, and violently blizzard to the company to inspect the air duct. Received praise from the construction unit and praised by the leadership.
5. Inspection of the arrival, installation and commissioning of the single crystal furnace equipment Firstly, the 10 single crystal furnaces replaced by the iii workshop will be compared with each of the single crystal furnaces according to the contract attached files to see if it is improved. . The problem was found to be reported in time and resolved through negotiation. The debugging of the device is also tracked until it can be produced normally. Now the v workshop is entering the furnace, and the arrival of 20 90 furnaces and 58 80 furnaces in the 5th workshop is inspected and inspected in terms of quality and quantity according to the contract attached files.
6. The supervision of other projects in the production department includes the repair and maintenance of the chillers in each workshop, the rust removal and anti-corrosion of the argon gas tanks in each workshop, the multiple repairs of the roof steel roof leakage in each workshop, the waterproofing project of the cooling tower and the modification check. Pulling process operation instructions, etc. I am serious about every job. In the days when the leaders went to Qingdao, I took time out of my busy schedule. I checked the pull-up workshops and the distribution rooms twice every day during the day. Every night, I took a bicycle from home to check the company once. I fulfilled the task assigned to me by the leadership with due diligence.
For each job, in addition to doing a daily black-leaf loose-leaf record, I also report to the leader on a daily basis, and do not regularly reflect the problem in writing. I have designed a complete and detailed form to record the details of each project, including the date, construction content, problems found and treatment methods, as well as the construction unit, responsible person, start time, end time, special problems of the head project. Record and so on. Specifically analyze the problems found, solve them by yourself or contact the leaders. The first time processing reduced the cost of labor and rework, which saved the company's expenses and was well received by the leaders.
Fourth, the shortcomings of the past year are mainly:
The drawing of the 1cad building construction drawing needs to be further strengthened.
2 Professional construction knowledge needs to be further improved to meet the needs of various engineering supervision.
3 The ability to organize and coordinate problems and solve problems needs to be further strengthened to cultivate their ability to solve problems independently and shorten the problem processing cycle.
V. The direction of future efforts will carry forward the above achievements, further improve and strengthen; will solve problems and solve problems; continuously learn professional knowledge, improve business quality and efficiency. High standards and high efficiency strictly control the quality of each project, and earnestly achieve "a hundred years of planning, quality first", and raise the quality of the company's various projects to a new level.
In short, being strict with self-discipline and being kind to others is my way of doing things. Adhere to the principle of doing things, honesty and honesty is my standard of doing things. Being calm and calm, doing things decisively and decisively, clear-cut ideas, and serious and responsible work. Dedication is my basic requirement for doing my job well. Looking back yesterday, I can say that I have a clear conscience; in the face of today, I am even more confident; looking forward to tomorrow, a bright future, a long way to go ------- I have to work hard to win the talents, make up It is short. Unite colleagues, develop harmoniously, and under the correct leadership of managers at all levels, I believe that my future work will bring new joy to the leaders.
A brief review of the work of pulling crystals in the first and twelfth years began in October 1997, and has been in existence for twelve years. From the three Xibei furnaces to open the crystal, to the old 8 workshops, after the installation of Jinglong Songgong to the electronic materials, Songgong v workshop. Years of vicissitudes, advancing with the times, the perimeter of each single crystal furnace has left my footprint of operation and maintenance. Twelve years have taught many apprentices. According to incomplete statistics, there are 21 batches of apprentices from the factory to the disciples. A total of 37 people. Recently taught is excellence and Yufeng. Among the apprentices, there are 2 ministers and 5 directors. There are also technical backbones or senior executives who go to the group and other units within the group. During the 12 years, I have made great achievements in pulling crystal, maintenance, team management, statistical summary, process research and development, equipment inspection, and engineering supervision. Has accumulated a wealth of process experience and management experience. I participated in several special trainings to charge myself. During the 12 years of work, I used the convenience of being close to home, and made many special nights to repair the stove and solve the problem of pulling crystal. One is not afraid of suffering, the second is not afraid of tiredness, the third does not pay remuneration, the fourth does not figure up, and the work has been obscure for more than 12 years.
Second, the work of the R&D center in the first half of the year The financial crisis did not affect the development of R&D in XX. From the sixth day of the first month of the first month, the equipment company's self-produced 90 furnaces and self-produced control cabinets were commissioned, and the ccd automatic diameter control experiment was carried out, and certain results were obtained. It has laid a theoretical foundation and practical experience for the normal operation of the fully automatic single crystal furnace. The experiments and scale production of 6-inch, 6.5-inch, 8-inch and 9-inch single crystals were successfully completed in the 8018, 8020, 9020, and 9022 thermal systems. Data on single crystal oxygen carbon content, lifetime and attenuation were scientifically analyzed. The comparison calculates the best cost of production costs, especially electricity consumption. Completed the magnetic field pulling, the molybdenum diversion tube and the tungsten wire rope pulling crystal innovation project. And the improvement of the production process such as changing the crystal turn, changing the cooling method and the innovation to improve the life of the single crystal minority have achieved certain results. It has made certain contributions to the reform and innovation of the crystal pulling process and energy saving.
3. Supervision of multiple construction quality in the second half of the year In the second half of the year, the full-time tracking quality inspection of 28 construction projects in four major categories of the production department was carried out.
1. The supervision of the civil engineering of the v workshop has been facing the unfamiliar industry since accepting the civil engineering of the v workshop on June 9th, and strives to carry forward the spirit of hard work, study, and dedication. I know very well that if you want to supervise well, you must not only understand but also improve yourself. So I first learned from the picture, and spent 2 days reading all the engineering drawings. In order to be able to keep abreast of the engineering situation and problems in the construction. I went to the factory half an hour earlier every morning, and went to the construction site of the i workshop, the iii workshop and the v workshop where I was responsible, and found that the problem was solved in time. Go to the office of Minister Zhang to report to the work before 8:10 every day. In order to do a better job, I set my own schedule, strictly demand myself, and work overtime according to the progress of the project. In the summer for one and a half months, basically after 5 o'clock after work, I worked overtime to 7 o'clock and the construction team to get off work. In addition to completing the supervision work, I also helped the director complete the statistics of the water pipe fittings in the iv workshop, summarize, analyze and reserve the materials for the v workshop. Waiting for work. And timely and efficiently complete other tasks assigned by the leadership. Work overtime every night to learn cad drawings, see a variety of architectural books and online materials. In this way, it supervised the completion of 80 sets of single crystal furnace foundation, 80 vacuum pump foundations, 12 cooling tower foundations, 2 ar tank foundations, 3 transformer foundations and power distribution room indoor equipment, and iii workshops for dilapidated buildings and other civil engineering projects. . Every day's work done by each civil construction was measured and compared with the drawings. Many problems were found. Many coordination problems were solved by the construction leaders themselves, and some reports were reported to the leaders for resolution. The company has reduced the unnecessary losses caused by civil construction errors and further improved the quality of the project.
2. Supervision of steel structure platform and circulating waterway welding.
I successfully supervised the completion of the steel platform of the workshop xx square meter steel platform and power distribution room of 400 square meters, as well as the steel ladder and small steel platform of each pump room; completed the welding supervision of the pure water and tap water pipeline of the circulating waterway of the v workshop; completed the vacuum pump Welding construction inspection of the room, board changing pump room, pipeline pump room, and refrigeration machine room pipeline; and welding construction inspection of pure water and tap water pipeline of i workshop. I have carefully supervised them one by one. In order to better check the quality of derusting, welding and painting, I have self-study of steel structure, welding quality inspection standards, grade classification standards for welds and inspection and treatment of common welding defects, and standards for derusting grades st2 and st3. Mastered the specifications of welding defects and descaling grades, and applied them to the inspection quality during construction to further improve the construction quality.
3, decoration ceiling and self-leveling resin ground engineering supervision I supervised the completion of the iii workshop ceiling replacement, and v workshop wall decoration and ceiling. It has formed a good friendship with Jiangsu Colorful Decoration Company. With Yangzhou Baoli Resin Ground Co., Ltd., the self-leveling resin floor of the v-station steel platform was completed, as well as the construction inspection of the resin floor of the furnace table, the lower floor of the workshop, the vacuum pump room, the air conditioner room and the epoxy frp inner wall of the pure pool. Many quality issues have been identified. It eliminates the drawbacks of construction work-saving, materialization, and speed in time. The company saved the losses and improved the construction quality.
4. Quality inspection of installation and commissioning of supporting equipment I strictly inspect the installation and commissioning quality of cooling towers, argon gas tanks, high and low pressure copper platoons, plate exchange and circulation pumps, transformers, chillers, central air conditioners and ducts. In particular, the cooling tower includes the i workshop and the v workshop, and the central air conditioner includes the inspection of the iii workshop and the v workshop duct. I found out more than 20 problems with the cooling tower. Many consultations have been held with the Asia Pacific Group, and most of the issues have been resolved and individual issues are being resolved. Air-conditioning ducts are even more of a headache. In order to ensure quality and dust, we have changed the air duct to an organic inner layer. However, the current domestic production process is still immature, and no manufacturer's ducts are qualified. Faced with this reality, I look at the real thing and look for problems with Shandong Dezhou Asia Pacific Group and Shijiazhuang Centuryda Company. Re-establish the inspection standards, on-site tensile test, and acid resistance test requirements. The 228 organic air ducts in the iii workshop and the 230 organic air ducts in the fifth workshop were inspected and numbered. The inorganic ducts were also inspected one by one. Organic repair of the patch, the redo of the redo, the qualification test can only be installed after the number is written. In order to achieve this goal, I have worked overtime many times. In order to catch up with the construction period, I did not accidentally install it, and in the latter half of the night, I took the rain twice, and violently blizzard to the company to inspect the air duct. Received praise from the construction unit and praised by the leadership.
5. Inspection of the arrival, installation and commissioning of the single crystal furnace equipment Firstly, the 10 single crystal furnaces replaced by the iii workshop will be compared with each of the single crystal furnaces according to the contract attached files to see if it is improved. . The problem was found to be reported in time and resolved through negotiation. The debugging of the device is also tracked until it can be produced normally. Now the v workshop is entering the furnace, and the arrival of 20 90 furnaces and 58 80 furnaces in the 5th workshop is inspected and inspected in terms of quality and quantity according to the contract attached files.
6. The supervision of other projects in the production department includes the repair and maintenance of the chillers in each workshop, the rust removal and anti-corrosion of the argon gas tanks in each workshop, the multiple repairs of the roof steel roof leakage in each workshop, the waterproofing project of the cooling tower and the modification check. Pulling process operation instructions, etc. I am serious about every job. In the days when the leaders went to Qingdao, I took time out of my busy schedule. I checked the pull-up workshops and the distribution rooms twice every day during the day. Every night, I took a bicycle from home to check the company once. I fulfilled the task assigned to me by the leadership with due diligence.
For each job, in addition to doing a daily black-leaf loose-leaf record, I also report to the leader on a daily basis, and do not regularly reflect the problem in writing. I have designed a complete and detailed form to record the details of each project, including the date, construction content, problems found and treatment methods, as well as the construction unit, responsible person, start time, end time, special problems of the head project. Record and so on. Specifically analyze the problems found, solve them by yourself or contact the leaders. The first time processing reduced the cost of labor and rework, which saved the company's expenses and was well received by the leaders.
Fourth, the shortcomings of the past year are mainly:
The drawing of the 1cad building construction drawing needs to be further strengthened.
2 Professional construction knowledge needs to be further improved to meet the needs of various engineering supervision.
3 The ability to organize and coordinate problems and solve problems needs to be further strengthened to cultivate their ability to solve problems independently and shorten the problem processing cycle.
V. The direction of future efforts will carry forward the above achievements, further improve and strengthen; will solve problems and solve problems; continuously learn professional knowledge, improve business quality and efficiency. High standards and high efficiency strictly control the quality of each project, and earnestly achieve "a hundred years of planning, quality first", and raise the quality of the company's various projects to a new level.
In short, being strict with self-discipline and being kind to others is my way of doing things. Adhere to the principle of doing things, honesty and honesty is my standard of doing things. Being calm and calm, doing things decisively and decisively, clear-cut ideas, and serious and responsible work. Dedication is my basic requirement for doing my job well. Looking back yesterday, I can say that I have a clear conscience; in the face of today, I am even more confident; looking forward to tomorrow, a bright future, a long way to go ------- I have to work hard to win the talents, make up It is short. Unite colleagues, develop harmoniously, and under the correct leadership of managers at all levels, I believe that my future work will bring new joy to the leaders.
recommended article
- Enterprise safety production summary 2
- Summary of 2019 work of flue-cured tobacco production office
- 2019 Highway Road Administration Brigade
- Safety production summary
- Summary of safety and security work in April
- Annual summary of township safety production
- County Agricultural Bureau Safety Production Work Year-end Summary
- Summary of safety work in October
- Summary of the safety production work of the town in 2019
- Summary of phytosanitary work in 2019
- Chemical workshop annual work summary
- Summary of the work of the production department in 2019
popular articles
- Taizai’s famous sayings
- Deaf people jingle 2019
- Thanks to the friend's words 2019
- Summary of phytosanitary work in 2019
- Experience in power safety in the first half of 2019
- 2014 is very touching words
- a good saying that loves labor
- Classical life motto
- Teacher's famous saying
- The company's production department work summary year-end total
- English famous words
- 2014 production department work summary
- Qq space mood phrase
- Summary of safety work in the first half of 2012
- Year-end summary of production work in 2019
- Tao Xingzhi's famous sayings
- College entrance examination inspirational quotes
- I want to say something to the teacher.
- Injured sentence
- Korean swear words
- A total of 2019 safety month activities of a project department
- Du Yuexi's famous sayings
- Bing Xin’s famous words
- Summary of work in the first half of the production workshop
- Sad love sentence 2019
- Summary of the work of the 2019 power company
- Strong words
- Describe the fast time sentence 2019
- The latest high school inspirational maxim
- 2013 safety production month summary