Experience in power safety in the first half of 2019

Experience in power safety in the first half of 2007

First, the completion of safety production indicators in the first half of the year:

No minor injuries and above personal accidents occurred. There were no serious injuries to the employees of the agricultural power and the above personal accidents. There was no single stop accident of two or more 110Kv substations. No major equipment accidents with personnel responsibility occurred. There were no fire accidents and major traffic accidents with the same responsibility. There were no mis-disposition accidents, vicious misoperations of 10KV and above, and 35KV and above misoperations. No power transmission and transformation assessment accidents occurred. There was no obstacle such as substation, but the transmission line accident occurred once, the transmission line was a type of obstacle 3 times, and the agricultural distribution accident was 18 times.

In the first half of the year, the first type of work ticket was 136, and the second type of work ticket was 821, with a pass rate of 100%. The first type of work ticket was 499, and the second type of work ticket was 90, with a pass rate of 100%.

The company did not have an assessment accident in the first half of the year. By May 31, the company's safety days were 2,554 days, achieving the first 100-day safety and accident-free record this year.

From January to May, 18 agricultural accidents occurred in 10KV, and a total of 17 agricultural accidents occurred in the same period last year. Three types of obstacles occurred in 35KV and above, three times in the same period last year; one accident in the transmission line.

2, transmission line accident 1 time: April 25, 17:25, 220kv new bridge change: Xinzheng line grounding distance protection action trip, coincidence; fault is B phase, measuring distance new bridge changed 16.89 kilometers; 220kv Zheng Lu changed all lost Electricity. 110kv Qinglong change, Liushu change all lost power. 35kv Zheng Zhongchang lost power, the estuary changed from the success of the Qinghe River. 18:24220kv Xinzheng 2918 line test delivery success. After the line inspection, it was found that the 220kv Xinzheng 2918 line 61 tower jumper, the main corner steel has burn marks, and the ground has plastic wire residue, which is verified by the tornado blowing the object onto the line.

3. A class of obstacles for transmission lines: A, March 1 500kv Wunan change 110kv Wunan line switch another sequence of protection action, switch tripping, coincidence. The reason is that Changzhou Shenzhou Huamu Garden Co., Ltd. construction steam hoisting arm touches the wire .

B, March 10, 220kv Wuhu changed 110kv 鬲 line switch in the other order of 1 protection action, switch trip, coincidence success. The cause of the fault is the 110kV 滆 line 8# pole B phase composite insulator lightning strike flashover.

C. At 2:55 on April 30, 220kv Yuncun changed 110kv Yunzhai line switch to another sequence of protection action, switch tripping, coincidence success. The cause of the failure is the 110kV Yunzhai line 18# pole B phase composite insulator lightning strike flashover.

Second, the main work review in the first half of the year:

1. Formulate strict preventive measures to further implement the responsibility system for production safety

At the beginning of the year, the company's safety production leading group held a meeting to discuss and pass the "2007 Safety Work Opinions" to clear up the train of thought for the safety work throughout the year. Since the beginning of this year, the company's production and infrastructure tasks have been extensive. In order to continue to maintain a good security situation, the safety production targets set by the Staff Representative Conference have been completed, and the measures to prevent and defy are put in place. All departments have re-established the actual situation of the department. Safety production strictly guards against the defensive measures. Each team has decomposed the company's safety production targets into this squad, formulated specific measures to achieve safety production targets, and implemented the safety production proposed by the company's leaders to strictly guard against various requirements. In order to give full play to the ownership of the majority of employees. On April 15th, the company's trade union and safety supervision department jointly held a safety production symposium on "What do I do for safe production ?" This symposium is the deepening of the company's further implementation of the responsibility system for production safety. It has fully exerted the enthusiasm of the majority of employees to do a good job in safety production .

creativity.

2. Seriously deepen the results of safety and rectification work to ensure the stable production of the company's safety

At the beginning of the new year, our company seriously focused on the safety production and rectification work requirements of the city company, unified thoughts, orderly arrangement, investigation and reflection, inspection and supervision, and received good results. In combination with the implementation and implementation of the spirit of the Sixth Staff Representative Conference of the 11th Municipal Government and the 2007 Work Conference, the work of 2007 was comprehensively summarized. The research determined the general requirements and key tasks of the company in 2007, and mobilized all employees to further clarify their ideas. Strengthen confidence, invigorate the spirit, and create a new situation in security work.

All departments of the company carefully organized the speeches of the leaders of the State Grid Corporation, the provincial and municipal companies at the security conference, the safety work summary of the city company in 2007, the safety work opinions in 2007, and earnestly studied the first and second phases of the provincial company's 2007 accident report. In 2007, our company organized various obstacles and unsafe situational compilation materials, and comprehensively searched for the implementation of safety production responsibility system, safety skills and safety in 2007 in five aspects: checking leadership, checking ideas, checking management, checking rules and regulations, and checking hidden dangers. Problems in training, six elements on site, and traffic safety.

During the period of safety and rectification, according to the "1.8" misunderstanding of the accident, the company organized the leadership and relevant departments to full-time, according to the actual situation of the Wujin Bureau, research and development of seven measures to prevent mis-entry, and has been implemented in the actual work.

In order to further standardize the daily safety production scheduling party system, it is clear that the work content of the party has added the supervision and inspection work items and scope of the leaders of each department, full-time, and focus on the dangerous point control measures reported by various departments. Ensure that the leaders of all levels of the team focus their efforts on safe production .

During the period of safety and rectification, various departments and teams carefully investigated 98 problems in safety production in 2007. Each department rectified 91 articles and the functional departments solved 7 articles. On the basis of earnest investigation, all work areas, companies, departments, teams, and individuals have formulated safety work opinions and guarantee measures for 2007.

The Safety Supervision Department organized a safety network meeting, formulated and issued the “Department Security Officer Work Requirements”, which detailed the specific work that the department security officers must do every year, quarterly, monthly, and weekly. The safety production responsibility system is refined and clear work requirements are put forward. Timely check the problems in the safety management of each department and propose rectification requirements. The inspection department security officers perform safety supervision and responsibilities every month, and conduct assessments in conjunction with process management, so as to improve the safety management level of each department.

3. Conducted basic training for strengthening safety.

According to the requirements of the city company, our company has carried out comprehensive safety training activities in the company from January 20th to February 28th. Through the mobilization of layers, the ideas of the cadres and workers have been unified. It is agreed that the implementation of safety training is very important for the daily safety production . It is also very necessary and timely, which creates favorable conditions for the subsequent smooth progress of study and investigation. It also made all employees deeply aware that only by maintaining a high level of safety awareness after safe learning and implementing safety responsibility systems at all levels can we truly ensure completeness.

During the training period, all departments carefully organized the speeches and related contents of the State Grid Corporation and provincial leaders at the security conference, unifying their thoughts and further raising their awareness. By learning the leadership speech, I gave a rational idea to the safety production of our company, highlighted the work focus, clarified the requirements of safety work, and consolidated the foundation of the safety work in 2005. In addition, our company continues to be practical, strict, and dynamic in safety production , seize the dangerous people and dangerous sources, and take measures to truly make safe production "horizontal to the side, to the end" to ensure full production. .

Through the study, analysis and discussion of accidents, all departments have rationally summed up the experience of all employees, especially for all employees to learn to be smart people, to be good at learning the lessons of others, and to draw inferences from departments, teams and work practices. Targeted precautions ensure full production .

Through intensive training, the awareness of all employees on the importance of safety production has been significantly improved, and the idea of ​​“safety exists in the details” has been more established. The relevant departments of the company have adopted the question form of the content of “Safety Regulations”, which has enabled the employees of the company to further understand the safety regulations. And familiar.

4. Adhere to the work policy of “two hands” for safe production

One-handed education

In February and February, the company's party committee made a series of activities to further ensure the safe production of the company, truly put the safety work into practice, and launched the "safe production base." On March 25th, the trade union and the Department of Safety Supervision held a work ticket issuer correction competition. On March 29th, the trade union held a signature activity of “Focus on safety, bid farewell to violations, and stay away from accidents”. On May 13th, the Youth League Committee conducted a safety knowledge contest.

b safety training:

According to the safety training plan formulated by the company at the beginning of the year, the Safety Supervision Department completed the safety education training for the work ticket issuer; completed the review and examination of the “Electric Safety Work Regulations”; the Marketing Department held a safety training course for users’ operating personnel; The company and the Ministry of Safety Supervision conducted safety education and safety examinations for the construction workers of 12 foreign construction units. In the first half of the year, the company's new personnel were given a three-level safety education.

c safety test:

The company's safety inspections are organized in two parts: production units and companies. All departments independently organized their own safety examinations, and after self-proclaimed reports to the Safety Supervision Department, they all organized their safety examinations in March, and the test results were reported to the Safety Supervision Department for filing. The company's middle-level cadres and engineering and technical management personnel of various departments, labor districts and companies were organized by the company and conducted safety tests at the end of March.

d security activities:

The safety activities of the team as the main front for propaganda safety and strengthening education, all departments pay great attention to it. In the first half of the year, apart from the busy production tasks of very few production departments, which affected the safety activities of the team on time, the overall situation was relatively normal.

Grab the scene with one hand.

In the first half of the year, our company's production infrastructure tasks were very heavy. In order to ensure full production , the company's leaders attached great importance to it and personally participated in on-site safety supervision. The safety value group, the safety supervision department, and the leaders of various departments went all out to strictly monitor and control the site. On-site safety production , timely investigation and punishment of violations of discipline and discipline, the safety value day group conducted a total of 151 on-site safety inspections, each inspection situation was promptly published on the regional network "daily security inspection" module, so that the problem department found can Rapid rectification; the Ministry of Safety Supervision conducted inspections on the convening of the safety department of the production department, the implementation of the "two-vote three-system", the implementation of the on-site inspection of the labor union recording system, the rectification of the security assessment and the pre-control of dangerous points. Adhere to the system of investigating the responsibility for production safety, and strictly deal with violations and violations of disciplines in accordance with the principle of “three not letting go” in the event of accidents, attempted violations and violations.

5, the company carried out a spring safety inspection

In order to conscientiously implement the policy of "safety first, prevention first", profoundly absorb the accidental lessons learned from the system in the near future, and do a good job in the current safe production work. According to Changan Power Supply [2007] No. 96 "On the Spring and the Peak The Notice of the Summer Safety Inspection and the requirements of the provincial company for carrying out the spring inspection work, combined with the actual situation of safety production , for the seasonal characteristics, our company has carried out safety from April 5, 2007 to April 26, 2007. checking work.

According to the requirements, all departments organized employees to seriously study the State Grid Corporation’s “Emergency Notice on Forwarding the Office of the State Council to Further Strengthen Coal Mine Safety Work” and the recent archives of safety net production by State Grid Corporation, Huadong Company and provincial companies, and learn about the recent system notifications. The lessons of the accident have enabled every employee to realize that safety production responsibility is more important than Taishan and that it is of great and far-reaching significance for the company to develop a safe and stable situation.

In conjunction with the safety evaluation and the safety and rectification activities carried out at the beginning of the year, various departments have sorted out the problems identified and focused on checking the implementation of the rectification plan. It also focused on the completion of the rectification of grid and equipment exposure problems during the peak summer electricity consumption last year, and the preparations for this year's “peaking summer” work. The Ministry of Agriculture, Engineering, and Biotechnology has carried out key inspections on agricultural power safety, infrastructure safety, and information security, and has made arrangements, inspections, and implementation of rectification.

In the safety inspection, the implementation of the safety production responsibility system at all levels was examined, and the “Notice on Further Strengthening the Management of Production Operations on Sites” and the “Regulations on Reaffirming the “Three Belts and One Grounding” Regulations formulated by the municipal company during the safety rectification period were mainly examined. The implementation of a series of rules and regulations such as the Notice. The leaders at all levels of the company adhered to the working methods of shifting the focus of safety management and moving forward, strengthening the safety monitoring at the production site, and ensuring the safety of the personal, power grid and main equipment. In the safety inspection work, all departments have carefully organized and implemented the rectification work on the safety hazards identified, in accordance with the principle of “checking and rectifying”, and timely eliminating potential safety hazards.

According to the unified deployment of the company, the Rural Power Management Office actively carried out the spring safety inspection work, and according to the “Key Points of Agricultural Power Safety Inspection” issued by the company, it carefully checked the problems and found and corrected the defects in time. The power supply organization organized 355 person-times and inspected the rural power supply network. Check the comprehensive transformation of 1075 units, check the low-voltage outlet line 3106, check the line spacing of 2898, check the pulling line 13272, check the field head box 9918, check the small pump 355, and check the temporary power 87. This inspection found 78 defects in equipment and 34 defects in the line. The Agricultural Power Management Institute and the power supply station handled 54 immediately, rectified one time limit, and 4 power outages. Others discharged the rectification plan according to the defect level and reported it to relevant departments. . At the same time, 313 trees were trimmed. Check the residual current protector: 2481 total protection, only two are not normal, have been processed on the spot, return to normal power supply; check the branch protection 85 units are cast

[1] [2] Next page