Construction and production safety accident emergency rescue plan

In order to strengthen the prevention of construction production safety accidents, timely carry out rescue and disposal work after the occurrence of safety accidents, and minimize accident losses, according to the "Safety Production Law of the People's Republic of China", "Safety Management Regulations for Construction Projects", etc. It is stipulated that, in combination with the actual construction and production of this unit, the emergency rescue plan for the construction and production safety accidents of this project shall be specially made.
First, the tasks and objectives of the emergency plan better meet the requirements of legal and economic activities, provide a better and safer environment for the construction and construction of the surrounding areas of the construction site; ensure that all emergency response resources are in a good state of preparation; The response actions are carried out in an orderly manner to prevent emergency rescue of accidents due to poor organization of emergency response actions or disorder and confusion of on-site rescue work; effectively avoid or reduce casualties and property losses; help to achieve emergency response actions Fast, orderly and efficient; fully embody the “emergency spirit” of emergency rescue.
II. Emergency Relief Organizations The emergency response organization of the construction safety accident emergency rescue plan is divided into first and second level preparations. The project department sets up the first-level emergency response organization for emergency response plan implementation, and the construction site sets the emergency plan implementation. Secondary emergency response organization.
3. Responsibilities, division of labor, composition of the emergency rescue organization, and functions and duties of each department of the first-level emergency response organization
1. Functions and responsibilities of the chief commander of the emergency plan 1 Analyze the state of emergency to determine the corresponding alarm level, and control the type of action according to the relevant hazard type, potential consequences, and existing resources;
2 Command and coordinate emergency response actions;
3 Liaison with emergency response personnel, departments, organizations and agencies outside the enterprise;
4 Directly monitor the actions of emergency operations personnel;
5 to ensure the safety of field personnel and foreign aid personnel and related personnel to the maximum extent;
6 coordinate logistics aspects to support emergency response organizations;
7 initiation of emergency response organization;
8 Emergency assessment, determination of raising or lowering the level of emergency alert;
9 to inform external agencies and decide to request external assistance;
10 Decide on the emergency evacuation and determine the safety of the affected area outside the accident site.
2. Functions and duties of the deputy chief commander of the emergency plan 1 Assist the emergency commander in organizing and directing emergency operations tasks;
2 to provide emergency response measures and recommendations for actions to mitigate the consequences of accidents to the emergency commander;
3 Maintain direct contact with the deputy commander of the accident site;
4 Coordinate, organize and obtain other resources needed for emergency response, equipment to support emergency operations on site;
5 Relevant technical and management personnel of the organization project department conduct risk assessment of each hazard source in the production process of the construction site;
6 Regularly check the daily work and emergency response readiness of each permanent emergency response organization and department;
7 According to the actual conditions of each construction site and processing plant, strive to share resources, help each other, establish a common emergency rescue network and formulate an emergency rescue agreement with the surrounding enterprises.
3. The functions and responsibilities of the on-site rescue team 1 Rescuing the wounded at the scene;
2 rescue the on-site materials;
3 Set up an on-site fire brigade;
4 Ensure the smooth flow of the on-site rescue channel.
4. Functions and responsibilities of the hazard source risk assessment team 1 Conduct a scientific risk assessment of the characteristics of each construction site and processing plant and the hazard source of the production safety process;
2 Guide the implementation and monitoring of safety measures in the production safety department to reduce and avoid accidents from hazardous sources;
3 Improve the risk assessment information of hazard sources and provide scientific and reasonable and accurate basis for the assessment of emergency response;
4 Implementing the emergency response resources of the surrounding agreements and the most effective and effective way of responding to the public and public resources of the public resources, providing timely emergency response support measures for emergency response;
5 to determine the location of the emergency response site command center for various possible accidents so that the emergency response can be activated in time;
6 Scientifically and rationally formulate emergency response materials and manpower plans.
5. Functions and Responsibilities of the Technical Processing Group 1 According to the construction and production contents and characteristics of the project manager and the processing plant, formulate emergency response plans that may occur and must be solved by construction engineering techniques, organize and archive, and provide effective engineering for the accident site. Technical services to make technical reserves;
2 After the emergency plan is started, according to the characteristics of the accident site, timely provide scientific engineering technical plan and technical support to the emergency commander to effectively guide the engineering and technical work in the emergency response action.
6. Functions and Responsibilities of the Aftermath Working Group 1 Do a good job of the stable work of the casualties and their families to ensure that the thoughts of the casualties and their families can be stabilized after the accident, and no major chaos will occur after the disaster;
2 Do a good job in tracking the medical care of injured people and coordinate the handling of contradictions in medical rescue units;
3 Work with the insurance department to make claims for casualties and property losses;
4 Consolation about the wounded and their families.
7. Functions and duties of the accident investigation team 1 Protect the scene of the accident;
2 to sample and store relevant physical materials on site;
3 investigate the main causes of the accident and the responsibilities of the relevant personnel;
4 According to the principle of “three will not let go”, the relevant personnel will be punished, educated and summarized.
8. Functions and Responsibilities of the Logistics Supply Group 1 Assist in the formulation of the reserve plan for the construction project or the emergency response materials of the processing plant, and check, supervise and implement the emergency response according to the emergency response material reserve plan of the established project construction and production site. The amount of material reserves, collected and established and filed;
2 Regularly inspect, supervise and implement the situation and change of emergency response materials management personnel in a timely manner to adjust the update and compliance of emergency response materials;
3 Collect and organize the emergency response materials and resources information of each project manager's construction site on a regular basis, establish archives and archive them, and prepare the emergency resources for the initiation of emergency response actions;
4 After the emergency plan is started, according to the deployment of the emergency commander, the emergency response materials will be effectively organized to the construction site, and the accident site will be replenished in time, and logistics services will be provided.
, the functions and responsibilities of each department of the second-level emergency response organization
1. Functions and duties of the deputy commander at the accident site 1 All construction site operations and coordination, including coordination with the command center;
2 on-site accident assessment;
3 to ensure the implementation of on-site personnel and public emergency response actions;
4 control emergency situations;
5 Do a good job in contact with public rescue departments such as fire protection, medical care, traffic control, and disaster relief;
2. Functions and responsibilities of the on-site casualty rescue team 1 Guide the on-site operators to evacuate from the safe passage;
2 Rescue the injured to a safe place.
3. The functions and responsibilities of the material rescue team;
1 Rescue the materials in the field that can be transferred;
2 Transfer materials that may cause new sources of danger to a safe haven.
4. Functions and Responsibilities of the Fire Fighting Group 1 Start the fire fighting and self-rescue work of the fire-fighting equipment and equipment in the starting area;
2 Assist the fire department in assisting in fire fighting.
5. Defend the functions and responsibilities of the group; 1 conduct effective isolation work within the field and maintain the smooth operation of the on-site emergency rescue channel;
2 Persons inside and outside the evacuation site are evacuated from the danger zone.
6. Functions and Responsibilities of the Logistics Supply Group 1 Quickly deploy emergency equipment to the accident site;
2 Provide and inspect the equipment and safety protection of emergency personnel;
3 Provide timely follow-up emergency materials;
4 Quickly organize the items that must be supplied by the logistics, and timely deliver the logistics items to the rescuers.
The emergency response organization of the emergency response organization is composed of the functional departments and the on-site construction personnel under the leadership of the emergency chief commander and the emergency deputy chief commander.
1. The emergency commander is served by the project manager;
2. The emergency deputy chief commander is the deputy manager of the project;
3. The team leader of the on-site rescue team shall be the person in charge of each project of the company, and the members of the project department shall be members;
4. The leader of the risk source risk assessment team is the chief engineer, and the other staff of the chief construction office are members;

5. The head of the technical processing team is headed by the chief of the technical management department, and the staff of the department is a member;
6. The head of the aftercare team is chaired by the head of the office, and the staff of the department is a member;
7. The head of the logistics supply team is headed by the Finance Section, the Mechanical Management Section and the Property Management Section, and the staff of the department is a member;
8. The head of the accident investigation team is headed by the chief of the quality and safety department, and the staff of the department is a member;
9. The deputy commander of the accident site shall be the person in charge of the project;
10. The on-site casualty rescue team shall be headed by the construction team leader, and each working team shall be composed of personnel;
11. The material rescue team consists of the construction crew and the material crew of each work team;
12. The fire extinguishing team consists of the electrician at the construction site and the personnel of each working team;
13. The logistics supply group is composed of logistics personnel and personnel of each operation team.
4. After the emergency rescue training and drills, the training emergency plan and the emergency plan are established, all the personnel of the construction project department and the construction site will be organized to carry out effective training, so as to have the knowledge and skills needed to complete their emergency tasks.
1. The first-level emergency organization conducts training once a year;
2. The second-level emergency organization shall conduct training before or during the first half of each project;
3. Newly recruited personnel are trained in time;
The main training is as follows:
1. The use of fire extinguishers and the training of fire fighting steps;
2. Construction safety protection, safety warning setting in the operation area, personal protection measures, common knowledge of construction and electricity use, traffic safety of construction in progress, and safe use of large machinery;
3. Identify the prominent characteristics of the hazard source;
4. Accident alarm;
5. Safe evacuation of personnel in an emergency;
6, the basic knowledge of on-site rescue.
After the drill emergency plan and emergency plan were established, after effective training, the construction project department drilled once after the project started, and held drills irregularly according to the length of the construction period. When the construction workers changed greatly, the number of drills increased. At the end of each exercise, a summary is made in a timely manner, and in the future work, there is a certain gap.
V. Accident report personnel and contact telephone quality safety department are the designated agencies of the accident report. Contact person: **, telephone: **, mobile phone: **. Quality Anke reports to the chief commander in time after receiving the report. The command shall promptly and truthfully report to the department in charge of safety production supervision and management, the construction administrative department or other relevant departments in accordance with the relevant regulations. If an accident occurs in special equipment, it shall also report to the special equipment safety supervision and management department.
6. Rescue equipment, equipment, vehicles, etc. The project department will withdraw a certain percentage of the annual cost. According to the nature and characteristics of the construction and the actual needs of the emergency rescue work, it will be equipped with emergency rescue equipment and equipment, and emergency rescue. Equipment and equipment are regularly maintained and maintained and may not be used for other purposes. After the emergency rescue plan is launched, mechanical equipment and transportation vehicles are uniformly included in the emergency rescue work.
VII. Recovery after the start, termination and termination of the emergency rescue plan When the assessment of the accident reaches the condition of starting the emergency rescue plan, the emergency response command is initiated by the emergency commander.
After the emergency rescue plan was implemented on the scene of the accident, the source of the accident causing the accident was effectively controlled and eliminated; all on-site personnel were counted; there were no other factors that caused the emergency rescue plan to terminate; the emergency rescue operation was completely transformed into social public rescue. The emergency commander believes that the development status of the accident must be terminated; the emergency commander issues an emergency termination order.
After the implementation of the emergency rescue plan is terminated, effective measures shall be taken to prevent the accident from expanding, to protect the accident site and physical evidence, and to resume construction and production after being approved by the relevant departments.
The whole process of the implementation of the emergency rescue plan shall be carefully and scientifically summarized, and the deficiencies and shortcomings in the emergency rescue plan shall be improved to provide experience and perfect basis for the establishment, formulation and revision of future plans.

8. After the preparation of this plan, it shall be reported to the relevant competent department for formal implementation after filing.