[Boutique] Production Internship Report

Catalogue 1 Surveying and Mapping Company Production Internship Report 2 Civil Engineering Production Internship Report 3 Production Workshop Internship Report Part 1: Surveying and Mapping Company Production Internship Report

Abstract: Graduation internship is a transitional stage in which every college student moves out of school and into society. The quality of graduation internship directly affects the speed at which students can integrate into the work after entering the society. It will also affect the ability of students to apply their professional knowledge in the future work. During the internship process, we will encounter many problems. The insights gained through the analysis of the problems and the summarization of the experience of the seniors are the most valuable gains of the graduation internship. This article mainly introduces the situation of the internship unit, the internship process and content, the internship experience and the harvest. Keywords: surveying; survey; production internship

I. Introduction

The university is a semi-social, and the end of the junior year is more like a platform for us to jump out of the campus and into the society. When we enter the society, enter the workplace, and face the environment different from the school, we need an adaptation process. The graduation internship just gave us an opportunity to adapt to the society and become familiar with the work. In the internship position, we combine the professional knowledge and practical work that the school has learned to achieve a combination of theory and practice. This is an important opportunity for us to verify knowledge and improve our practical ability. In the internship unit, the unit instructor teaches us the methods and requirements for the internship; at the school, the school instructor answers the questions we have about the professional knowledge through practical work. In the internship process, we should study hard and think hard, and strive to improve our self-sustainability in society.

Second, the introduction of the internship unit

Qingdao Jingwei Survey Technology Co., Ltd. was established on May 17, 2006 with a registered capital of 2 million yuan. The office address is located on the 9th floor of Sunshine Building, No. 10 Beijing Road, Jiaonan City. It has the engineering measurement qualification certificate issued by Shandong Provincial Department of Land and Resources and Shandong. The Grade B forestry survey planning and design qualification issued by the Provincial Forestry Bureau, the ISO quality system identification unit, and the Shandong Provincial Surveying and Mapping Association member unit. There are 22 active employees, including 3 senior technical titles and 5 intermediate technical titles. The business carried out includes: forest resource survey, monitoring, forestry project implementation plan preparation, project feasibility study, forest resource assessment, occupation of forest land feasibility demonstration and site inspection, forest greening planning and design, engineering measurement, etc., “3S technology "With computer and auxiliary design and other professional as one of the company's technical equipment, equipped with multiple high-precision GPS receivers, total station, level and other electronic instruments, fully realized the electronic design of surveying and mapping. Ensure the quality of the project and the quality of service, and establish a good social reputation. It has won four surveying and mapping engineering awards issued by Shandong Surveying and Mapping Association. In 2019, it was awarded the title of Excellent Surveying and Mapping Unit of Shandong Province. In 2010 and 2019, it was awarded the Excellent Surveying and Mapping Unit of Jiaonan City. Third, the internship situation and content

On July 12, 2019, I came to Qingdao Jingwei Survey Technology Co., Ltd. to report and started a 45-day production internship.

The manager of the company's personnel manager, Zhou, received me and introduced me to the duties of the company, the precautions in the work and the internship treatment. Later, my classmates who were internships were sent to Longquan Urban Garden, the project office of Linyi County, Weifang City. Then I started the summer production internship here. I worked with Zhao Wei, Mr. Yan, Gao Gong, Liu Gong, Li Gong and my classmate Zheng Dexin. The main content of the work is the finishing work of the second part of the land survey in Shandong Province. Our company has undertaken the topographic map, boundary mapping and data processing work of Chengguan Street and Sitou Town of Linyi County.

As an intern, I did it both inside and outside the company. On the second day, Li Gong and Liu Gong took me to Chengguan Street to measure the measurement of an illegal building allocated by Chengguan Street in Linyi County. This semester has just learned the GPS measurement course. The main tool for the internship is GPS. The company has two GPS stations in the Linyi office, one in the Haida, one in the south, and one in the southern surveying and mapping station. The first time I was in full contact with GPS, my heart was full of curiosity and I was afraid that I could not master it. At the beginning, these two old employees asked me to hold a pole with GPS installed. This is boring, I am really long on that. The GPS handbook like a mobile phone is extremely interesting, but I understand that I can't touch it at first. This illegal architect has an unapproved road that is relatively easy to measure, without obstructions and trees or buildings that block signals. At the end of the measurement, Liu Gong showed me how to adjust the GPS. I experienced it and it was very good. After measuring a little more, one gas was measured. After returning, the director and Liu Gong completed the drawing work. They used the software CASS in the southern school to learn the software. It was learned that the old staff skillfully manipulated the software. All that I have learned is fur, and many things have been forgotten or not yet familiar. Later, several foreign businesses measured Changyi City, measuring 150 acres of topographic maps for the “Shanshui Holy City” project; topographic maps of Xijiahe Village and Longquangou Village in Longgang Town, Linyi County. The project in Changyi City has been measured for 2 days. This time it is truly comprehensive contact and use of GPS. Although this project measures a wasteland, the wasteland is extremely uneven, and it is even pitted and dangerous. This is the manager Zhao Wei brought us. The project leader first introduced us to the contents to be measured, drawings, known coordinate points and so on. At the beginning of the measurement, I was responsible for the lifting of the pole, and later I also operated the handheld GPS. This land is quite difficult to measure. In some places, the water is very deep. We can't enter the measurement. Liu Gong taught me to take a simple method and lift the rod obliquely over the water so that I can measure the point I want to measure. There are still many places where old employees often sum up some simple methods. At the same time, I also realize that although surveying and mapping is a difficult task, it also requires flexible use of the mind. At the same time, it must have a theoretical knowledge and be good at Adapted, of course, the most important thing is not to be afraid of suffering. Because the environment for topographic surveys is unpredictable, or it is mountainous, leeches, hills... The environment is very bad. Later, we went to Longgang Town to measure the topographic map. Here we met very good villagers. We saw the advanced equipment in our hands and asked us curiously, "What are you doing?" Of course we will explain them clearly. . These villages are all mountainous, so it is very troublesome to measure. At first, I climbed the mountain for nearly 2 hours. I only measured 1 point in the morning. After going down the mountain, I was also scratched by thorns and branches. At noon, I drove to the town to buy rice and then ate at the door of a fellow villager. Seeing that we were eating in the car, they gave us a table, chairs, etc., so that we felt warm in the heart, there is such a simple and kind Villagers. Although the work was hard, I found myself interested in this work, because the field was much more comfortable than the tedious and repetitive work of data processing on the inside pages. Of course, this is a work that is both mentally and physically hard. Regrettably, my driver's license was not tested at that time, and I was stuck in subject three. Otherwise, I could practice my car skills in the summer vacation. This forced me to come back and get a driver's license. I finally finished my driver's license in October.

In the latter half of the month, we have also studied the processing of internal pages, mainly to make the boundary maps, maps and sketches of the villages. The software used is AutoCAD, CASS, MapGIS, etc. It's very slow, and a lot of knowledge has been forgotten. The processing of data on the inside page is a work that needs to be carefully and carefully, and it is necessary to have the patience to change the picture over and over again. If you are not careful, it may lead to redo. And when you are drawing, you should store it at any time to avoid sudden situations such as power outages.

Fourth, internship experience

During the period of doing the field work, I have mastered the operation and use of the total station and GPS. At the same time, I have also had a hard time understanding the basic situation of the work of surveying and mapping, and I have an early adaptation to the future work. After suffering, I will not be afraid of suffering in the future. In the work of processing the data on this page, we also skillfully operated office software such as office and excel, and at the same time honed our patience, which will definitely help the present and future work. Sometimes I will follow the manager to the materials and meetings of the land resources. This also allows me to learn some knowledge of the surveying and mapping industry, learn some things to deal with people, and add a weight that can stand up to the society. . Overall, this one and a half months, let me have some growth, mastered and skilled in the operation of professional skills, have a deeper understanding of the industry. I hope that in the remaining less than one year, I will master the classroom knowledge, master the professional skills, and get a good job. After the formal work, I can use the knowledge gained this month to avoid some mistakes made in life. The road can be more and more smooth.

Part 2: Civil Engineering Production Internship Report

I. Introduction

Production practice is an indispensable practical teaching link in the civil engineering professional teaching plan. It is the unification of the theoretical knowledge and engineering practice. During the internship process, I went deep into the construction unit and took a high-rise residential community as an internship. Under the guidance of the technical staff of the project department, I participated in the construction work and successfully completed the one-month internship. At the same time, it also lays a good foundation for future engineering time. Second, the project overview

Project Name: Poly City Project Location: Longgang District, Shenhui Road and Yi Cui Road Interchange, Ailian Gangbei Village Construction Unit: Shenzhen Poly Real Estate Development Co., Ltd. Supervision Company: Shenzhen Jianli Construction Supervision Co., Ltd. Architectural Design: Watson Construction and Engineering Design Consultants Ltd.

Construction unit: Shenzhen Qisheng Construction Engineering Co., Ltd. Start time: 2010-08-01 Completion time: 2012-01-01

This project is a group project located at the intersection of Shenhui Avenue and Yi Cui Road in Longgang District. It is the core area of ​​Longgang District and is adjacent to the Ai Lian Station of Shenhui Road and MRT Line 3. The total area of ​​the project is 69,992 square meters, the total construction area is 353,940 square meters, the floor area ratio is 269,522 square meters, the project cost is 350 million yuan, and the complex high-quality commercial and residential community is built. The barrier-type housing is about 12,985 square meters. Kindergarten 3200 square meters and 4270 square meters. Third, the internship content

3.1 Familiar with engineering construction management and technical management. Due to the short internship time, only involved in the specific operation of the construction process, a brief overview is as follows:

3.1.1 The technical person in charge of the project is responsible for implementing the technical post responsibility system and the technical delivery system. Before each process, technical submissions must be made and the “technical record” should be filled out.

3.1.2 The project manager instructs all professional engineers to fill in the “construction log”. The project manager should record and store a detailed “construction log”. The contents of the “construction log” include the following aspects: the construction site of the day, the number of construction of the site, the specific construction team, the specific site manager, the materials and equipment for construction, the method of operation or the technical basis, and the day. Climate, inspection and test conditions of construction sites on the day, and problems during construction.

3.1.3 During the construction process, the engineering office is responsible for on-site labor deployment, schedule management, mechanical use and construction safety, and stores relevant records. The engineering manager is responsible for hosting a weekly engineering meeting to summarize the progress of the project last week, find out the gap between the actual progress of the project and the plan, and arrange the work this week. The project chief summarizes the construction quality status of last week and makes recommendations and requirements for the next step of quality management.

3.1.4 During the construction process, the self-inspection, mutual inspection, handover inspection, and special inspection system shall be carried out. After the quality inspection personnel of the construction team have passed the self-inspection of each process, they shall fill in the self-inspection form and sign the relevant work class. After the project quality inspector reviews and passes the inspection, the next process can be carried out. Unqualified processes must be reworked, and the next process can be carried out after passing the acceptance again. Through the establishment of the joint inspection system, the project fills in the quality joint inspection form and strengthens the control of the quality of each sub-project.

3.1.5 The design changes during the construction process shall be the responsibility of the professional engineers. According to the provisions of the “Contract Change Management” section of this quality plan, it shall be timely transmitted to each business port and related construction team.

3.1.6 The mortar, mortar and waterproof material shall be sampled by the tester and sent to the company's laboratory for testing. After passing the test, a corresponding test report shall be issued. The product can be issued after passing the test.

3.1.7 After the quality inspector of the concealed project is qualified, the professional engineer fills in the concealed project acceptance record and reports it to the owner or supervising engineer for acceptance. The owner or supervising engineer may sign the acceptance record before proceeding with the construction.

3.1.8 The monthly progress plan is prepared by the technical office. The engineering manager is responsible for refining the monthly progress plan to the weekly and daily, implementing dynamic monitoring and quantitative management to ensure the construction progress. 3.2 Specific operation of construction technology

3.2.1 Writing the construction technology and attending the technical meeting The technical disclosure is the premise of the commencement of each sub-project/segment project, and it is also the technical guidance that is consistently applied, which directly affects the quality of the project, and its reliability is of vital importance. Therefore, as a technician, I have to submit it to the technical office director for review after I have finished writing the bill. During the internship, I wrote the technical coverage of "floor slab hole blocking", "air conditioning hole punching", "fat tank backfilling" and so on. In the process, I searched a lot of information and benefited. When the technical coverage of the "floor slab hole blocking" was written, it was mainly after the quality problems of the project. This part of the content was rarely touched in the classroom. The access hole is a hole reserved for the water and electricity passage during the construction process of the floor. Its aperture is larger than the radius of the passage. If it is not blocked or the sealing is not tight, water leakage is extremely likely to occur, so technical treatment is required. For the general case, the main well is to cut the access well into the "eight" shape, and then install the template. The template is attached to the main structure and the intersection of the sponge. The template is required to be firmly installed, and the joint between the floor and the pipe body is tight. Then, the fine stone concrete is stirred and poured, and the steel bar is inserted and compacted, and finally the mold is removed for maintenance. For special cases, if the floor slabs block the passage of the passage, the steel bars need to be blown. When the technical treatment is done, the structural slabs are spliced ​​or the expansion bolts are used to connect with the main body. The steel bars are lap welded, the welding is reverse welded, the welding length is 5d, and the operation is followed. The program is the same as the general case.

By writing technical tips, I have a certain understanding of the sub-project/segment construction process, not only consolidating the professional knowledge I have learned in the classroom, I am familiar with the relevant norms, and I have learned a lot of knowledge beyond books.

3.2.2 Finishing the engineering materials During the internship, I compiled some engineering materials, such as "Application for Concrete Watering", "Concealed Engineering Inspection Record", "Engineering Materials Entry Inspection Form", "Materials and Construction Accessories Entry Inspection Record" Wait. For example, in the “Application for Concrete Watering”, the construction team will pass the project department and supervision after the steel bar is tied. The project room of the project department will report the quantity and location of the required concrete to the concrete mixing station. Then, the concrete transport vehicle needs to enter the site. Submit the small ticket for the self-examination of the concrete opening, and fill in the watering application by the project department and submit it to the supervisor for filing. Through the collation of these materials, I have learned about the relevant programs and specifications for engineering construction. Fourth, thinking and innovation

Learning is endless. By seeing the results, we can actively think about the causes and treatment methods of the problems, so that we can learn more knowledge in the work, truly play a good internship effect with the theory and practice, and deal with the engineering techniques encountered. In the process of the problem, enhance the ability to analyze and solve problems.

During the acceptance process of the structural column reinforcement, the design unit selects the light round ribs on the adoption of the vertical ribs, and the friction between the stirrups and the light round ribs tied by the construction team during the construction process is too small, resulting in the stirrups being downward. Sliding, causing inconvenience to the construction. Therefore, the construction team arbitrarily changed the round ribs into thread ribs to increase the friction force, so as to facilitate the lashing construction of the stirrups, but this change greatly increased the cost. Through positive thinking, I proposed the following rectification plan to the director of the technical room: the four vertical ribs of the dark column are made of 2 light round bars and 2 thread ribs, which are placed diagonally at the time of construction, which not only increases the stability of the stirrups, but also facilitates construction. It also reduces costs. This program was affirmed by the director. V. Summary

After a month of production internship, I feel deeply. In terms of construction technology, the actual operation is based on theoretical knowledge, but it is more flexible and operability than theoretical knowledge. This requires learning professional knowledge and actively thinking at work, applying flexibly, and cultivating its own thinking innovation and independent solution. The ability of the problem. At the same time, using this internship to get in touch with the society, get a good workout, and clarify the direction that should be developed in the future, especially the need to develop language communication and communication skills, study hard, work hard, and actively face every challenge.

Part 3: Production Workshop Internship Report

First, the internship instructions

Internship time: August 26, 2019 to December 30, 2019 Internship location: Renbao Co., Ltd., Kunshan City, Jiangsu Province Internship: Social Practice Report

Second, the internship unit

Compal Group, established in 1984. The world's largest notebook computer R & D and manufacturing. Global 500 companies. Global Technology Top 100. Taiwanese companies ranked third. In 2019, the total import and export volume was the eighth in the country and the first in Jiangsu Province. Third, the internship environment

During the internship, I worked in the a77 workshop of the ina workshop, which is mainly engaged in the production of first-line production and simple processing of products. I was assigned to work in a group in the department, which has a manager, a supervisor, and a foreman. Each production team in the workshop has a team leader, a technician, and an ipqc staff of more than 14 people. Fourth, the internship process to understand the process

At first, when I first entered the workshop, everything in the workshop was strange to me. The working environment in the workshop is not very good, and the scene in front of people is inevitable, and it will be a little sorrowful in the harder environment. When I entered the workshop on the first day, the team leader and technician of the team gave me the task. The task assigned to me was to simply test the internal structure of the computer. I followed the method taught by the technician and started to learn slowly with the operation tool. Test the product, pay attention to the operation process and related precautions while testing. On the first day of the internship, I tested the product in this first job and experienced the feeling of working in the community for the first time. Gradually familiarize yourself with the working environment of the workshop while working.

As a student who first came to work in the society, the understanding of society and the understanding of all aspects of the work unit are rarely strange. At the beginning, I didn't know much about the rules and regulations in the workshop, the safety production procedures and the related precautions in the work. So I read the employee handbook issued by the internship unit and asked the staff and colleagues in the group. Understand the relevant matters of the work, through their help, I have a certain understanding of the situation of the workshop and the production of products and processed products. The work of the workshop is carried out in two shifts. The working hours of the two shifts are from 8:00 am to 8:00 pm and from 8:00 pm to 8:00 pm. All employees in the workshop must abide by the system of going to and from work. Groping process

After getting familiar with the environment in the workshop, some nervous hearts began to calm down slowly. I went to work at the factory every day during the work. I went to the designated place before going to work. I waited for the foreman to gather the staff to meet and emphasize the relevant matters in the work. At the same time, assign us work tasks. After clearing the work tasks, I would do some preparatory work before the work, so I went to the tool storage area of ​​our team to find some related tools that I needed to use. In the normal operation of the assembly line, I used the tools required for the work to test the products produced by the machine and brush the guns. In addition, at work, the products produced by the machine sometimes have abnormalities. When the above situation occurs, it is necessary to inform the foreman and engineer in time, and the universal workers let them help solve the problems that arise. The foreman and the engineer adjust the machine to normalize the produced products and meet the requirements of the inspection.

Some products are difficult to test during work. It is really tricky to start processing, the work efficiency is not high, and the quality of the tested products is not so good. I am distressed, so I communicated to the staff and colleagues in the group and asked them for simple and quick test methods and techniques. Use the techniques and techniques they introduced to learn to test the difficult products and experience the effects of the test products. At the same time, choosing the right test tool in the test will also help to improve the efficiency of the work.

V. Summary and harvest of the internship work

During the internship, I had a complete understanding and familiarity with the entire operation process of the internship factory. Although the internship work did not have much to do with the majors I studied, in the internship, I broadened my knowledge and learned a lot of knowledge outside the school, even things that were difficult to learn at school.

During the internship, I realized the difficulty of picking up books from my work. I have to go to work earlier every day, and I have to go back to work in the dormitory late in the evening. I feel very tired. It is difficult to have the energy to calm down and read the book. This makes people cherish the time in school.

In this graduation internship, I learned how to use the knowledge I have learned to solve simple problems and learn how to communicate with my colleagues. Experienced methods of dealing with issues related to interpersonal relationships have been accumulated. At the same time, I experienced the hard work of social work. Through internships, I trained myself in the society, exercised my willpower, trained my hands-on ability, and improved my practical skills. It has accumulated a simple experience of social work and laid a foundation for future work.