[Boutique] Internship report format essay

Part 1:: Internship report format essay

From May 11th to 22nd, we conducted a 10-day metalworking internship at the school. During the period, we contacted and studied ten types of work such as wire cutting, forging, plastic processing, fitter, rapid prototyping, heat treatment, automobile, lathe, machining center, and industrial control, and learned a new skill every day. Under the patient and meticulous teaching of the masters and our own serious and positive cooperation, we successfully completed the task of metalworking internship, basically met the expected internship requirements, and there was no incident of injury.

"Metalworking Internship" is a practical technical basic course. It is an important compulsory course for engineering students in engineering colleges to learn the basic techniques and techniques of mechanical manufacturing and complete basic training. It not only allows us to acquire the basic knowledge of mechanical manufacturing, understands the general operation of mechanical manufacturing, improves its operational skills and hands-on ability, but also strengthens the theoretical and practical exercises, improves engineering practice, and cultivates engineering. Prime. This is a journey of learning and exercising. I have benefited a lot from this internship, although it was not long, but it was a substantial internship. Here, I selected a few of my most impressive metalworking internship diaries as a report.

First day: wire cutting

Today is the first day of the metalworking internship. Due to lack of experience, we are not fully prepared. After listening to the teacher's speech, we went to the workshop and received our own work number, and everyone went. What we are doing today is wire cutting, which is the EDM CNC wire cutting process.

This is a special processing method. The equipment is more expensive and the operation method is more complicated. In case of improper operation, the electrode wire used for cutting will be broken, and even personal and equipment accidents will occur. So today the teacher gave us details before the start. Introduce the four major components of the machine tool and its main functions: CNC device, machine tool part, wire transport mechanism, wire frame, and carriage under computer control, coordinated forming movement, bed composition; high frequency rushing power supply, There are two working fluid systems.

CNC wire-cutting technology is to use a well-written program to cut various small workpieces by wire discharge. The work we need to do is to design the workpiece with software and place the workpiece. For the good knife, other things are given to the computer. finished. High accuracy, but slower. According to the arrangement, we designed the graphics and we can operate on the lathe. However, because there are very few students whose work progress is too slow, the final time is not enough, so the teacher only showed it to us once. I didn't get the work I designed, which is also a small regret for my internship today.

Day 2: Forging

Today's work is forging, and the popular one is also called iron. When it comes to hitting iron, my mind will show the picture of the ancient blacksmith sweating on the side of the fire, holding pliers in one hand and hammering with one hand. But in our internship, we replaced it with tall, bright workshops, high-powered fans, advanced resistance furnaces, and air hammers that provide one ton of force. The scene of the ardent heat is not appearing. When workers want to do their best, they must first sharpen their tools. With these advanced equipment, our work has become extremely easy.

Our job today is to make a cylindrical iron block into a regular hexagonal prism. All we need to do is wait for the resistance furnace to heat the iron block to the proper temperature, then take it out with pliers and put it on the anvil pad of the air hammer. The two students use the iron clamp to fix it. The other classmates manipulate the air hammer pair. It strikes. The only safety issue that needs attention is to prevent burns and air hammers, but as long as you are careful, there will be no such accidents.

Pay attention to the strength when striking. If the force is too small, a thin waist or interlayer will be formed. If the force is too large, the shape of the workpiece will be deviated. With the perfect cooperation of the three of us, we quickly created the required products.

Day 3: Plastic processing

Day 4: Locksmith

This day's internship is because of Thursday, so there is a half-day holiday according to the arrangement, but it is the hardest of all interns, because we have to manually machine a cylinder into a hex nut and drill holes. In the internship internship, we know that the main contents of the fitter are scraping, drilling, tapping, sawing, boring, assembling, scribing; understanding the construction, classification, selection, boring posture, boring of the boring tool Method and quality testing. First of all, it is necessary to hold the boring tool correctly. Keeping the straight motion of the boring tool when cutting the plane is the key to boring. The boring force has two kinds of level thrust and vertical pressure. When the file advances, the front hand pressure gradually decreases, and the hand pressure is large and then small. When the file is pushed to the middle position, the pressure of the two hands is the same. When the file is continuously pushed, the pressure of the front hand gradually decreases and the pressure increases. No pressure is applied when the file is returned. This way we are more difficult to cut.

The first step is to slash one side of the cylinder with a trowel to smooth it, then use a hacksaw to cut a length of the cylinder, and then use a trowel to polish the section. Next is the most difficult process, we have to first scribe on the top surface of the cylinder, and then use a trowel to harden the cylinder into a six-sided column! There are many students who have problems at this level, not the ones that are not made. The regular six-prism column is the size that does not meet the requirements. Even if the students who succeeded in making it are too sweaty, their hands are sore. Time dimension in May, preface to early summer, although we are already tired and hot, but we have no complaints. The final process is to punch and tap the thread. This is a relatively simple process. If the workpiece is a regular hexagonal prism, the hole that is punched out is at the center of the circle. After the thread is completed, the entire work is completed. We hold our own works, although some are not regular six prisms, and some holes are smashed, but after all, this is the work that we created by hand, and we spent half a day doing the work of others, we I feel a sense of accomplishment.

The internship of the fitter is really boring, it requires physical strength. The whole morning is repeated in the process of smashing and sawing. At the end of the foot, the foot is also numb, and the hands are sore. The girls are unable to support it, but there is no One person gave up halfway. The internship of the fitter also made me know that even a small nut can be made through a lot of processes, that is, each of these parts constitutes a working machine, we can not underestimate a small Small parts. Lei Feng said: "The machine has become a solid whole because of the connection and fixing of many screws, so that it can run freely and exert its enormous working ability. Although the screw is small, its role cannot be underestimated. I will always be Make a screw." Only those who are willing to be screws can have a functioning machine.

Part 2: Internship report format essay

When I stepped into the gate of Rongcheng TV Station on the first day, I felt a little embarrassed and uneasy in my heart. I don’t know if I can integrate into the work smoothly, can I get the approval of the people around me, but the next half of the month The internship life completely dispelled my concerns. Here, I not only learned a lot from my colleagues, but also became friends with them. More importantly, the internship made me experience a mature. The journey of the heart, this will be the wealth of my life.

I entered the editorial office. I heard a lot of rumors about the interns before going there, saying that they were either treated as transparent people in the unit or they did some chores, so they were a bit worried that they would be like them.

Stepping into the office, I saw a few strange faces. I smiled and greeted them. From that day on, I developed a habit. Every morning I saw them smile and say "morning" or "good morning". That is my sincere greeting. I always feel that there are often some subtle things that are easily overlooked by us, such as a soft greeting, but it expresses the concern for colleagues and friends, and makes others feel valued and cared for. In just a few days, I was able to mingle with my colleagues, and I was worried that the "transparent people" did not happen. I think it should be my sincerity in exchange for the trust of my colleagues. They treat me as a friend and are willing to assign work to me.

In fact, not only do people have to be "sincere", but they must also be "sincere".

The editor-in-chief is on the eighth floor. Whenever there is not much work, I often go to the “Minsheng 360°” column on the fifth floor, where I can further experience the recording process of the program, from recording to post-production, to Finally, the show is presented to the audience, which contains a lot of knowledge that I need to observe and learn. Even if I can't be a full-time staff member, I always face it with a sincere heart.

When the videographer of the program group recorded the program, there were several shots that were always dissatisfied, but I couldn’t think of a good way to modify it. I then put my own opinions in good faith. Unexpectedly, he accepted it with pleasure. In front of the cameraman, I was just an inexperienced junior, not even a staff member of the column group, but instead of showing a disdainful expression, he accepted my opinion. This made me deeply understand that we are not treating work. It should be discussed in terms of resources, opinions or suggestions. As long as it is good for the work, it should be said with sincerity. Let's discuss it together. In fact, as long as you are sincere, who cares about your qualifications, and who will look down on you?

In the column group, I met a sister who just finished the probationary period. She is only a few years older than me, but she has a lot of work experience. She will start to host the program soon. I will learn from her. A lot of knowledge has arrived. She told me that it is not so simple to be the host of "Zhesheng 360°", not only to run news to write news, but also to link all the news together in the host, to make appropriate transitions and to dig deep from it. Commenting on the level of connotation, which requires not only good eloquence, but also a mind with connotation. This made me understand the importance of theoretical knowledge and strengthened my belief in trying to learn theoretical knowledge.

Theoretical knowledge is important, but only by combining theory with practice will we learn more. Sometimes I will follow the reporters in the editorial office to run the news, from the urban residential area to the surrounding villages, the hot sun, let me really feel the hard work of the reporter.

In the course of following the interview, I was exposed to people from all walks of life. While dealing with them, I also learned something I had never learned before, that is, communication and communication. These two words seem simple, and everyone will, what is important is how to communicate how to communicate. As a journalist, you should be good at excavating the stories behind the news events, let the interviewees trust you, and talk to you in the heart, so that a news can be full, not just a skeleton without content. In addition to being good at communication, you must be sincere to others. As long as you treat others with sincerity and respect others, others will understand you and cooperate with you. In an interview, the interviewee was an 80-year-old man. Because the old man’s ears were not flexible, it was difficult to hear what we were saying, or even the text was wrong. But we did not give up, but slowly The problem was said to the elderly, and the elderly worked hard to complete the interview. I think that to become a good journalist, you must not only have good eloquence and clear thinking, but also have sufficient patience. Any news is not falling from the sky. Any interview will not be smooth. We need to have a heart that is not anxious, and we can't make a quick profit. Only in this way will it be easier to communicate with people and make the best news.

Part 3: Internship report format essay

First, the purpose of the internship:

Consolidate, expand and deepen the theoretical knowledge learned in the classroom, familiarize with the whole process of meteorological business, obtain preliminary experience and basic skills of meteorological work, focus on cultivating independent work ability, familiar with the operation and maintenance of basic meteorological instruments, and master the ground. The basic methods of high-altitude observations are further familiar with radar principles, radar operations and related maintenance knowledge, laying a solid foundation for future work.

Second, the internship unit introduction:

The xx City Meteorological Bureau is a national reference station and an integral part of the Global Climate Observing System. The station covers all meteorological observations and undertakes the latest instrument testing work by the National Weather Service. The xx Municipal Meteorological Bureau is responsible for the meteorological monitoring and forecasting management within the city, timely proposes meteorological disaster prevention measures, and makes assessments for major meteorological disasters, providing decision-making basis for the people's government to defend against meteorological disasters; managing public weather forecasts in the city, The release of professional weather forecasts such as severe weather warnings and agricultural meteorological forecasts, urban environmental weather forecasts, and fire hazard meteorological forecasts. Responsible for proposing to the Municipal People's Government and relevant departments at the same level to use and protect meteorological resources and promote and apply climate resource zoning; organize climate feasibility demonstration of meteorological resources development and utilization projects.

Third, the internship content and process

On July 19, on the first day of the internship, the leader of the squad took us to visit the meteorological observation site, introduced the relevant information of the xx city meteorological bureau, and asked us the relevant requirements for the internship. For various reasons, we failed to follow the original. The plan was an internship but a temporary adjustment was made. In the following seven days, we conducted business internships at ground stations, meteorological stations, and high-altitude stations, and visited the radar station.

1. Ground observation

Ground observations are the basis of the entire weather forecast. Timed observation data is needed. The observation items include cloud observation, temperature observation, humidity observation, evaporation observation, irradiance observation, sunshine observation, air pressure observation, wind direction wind speed observation and rainfall observation. Now ground observation has been basically fully automated. Various data are automatically collected by various sensors, sent to the display terminal after processing, and automatically displayed by the computer, and uploaded to the national office on time. However, for the storage integrity of historical data, the xx station retains the manual station. Every other hour, we have to go to the observation field to read the data. After returning, the data read will be entered into the system and compared with the automatic station data, and will be manually reported to the provincial meteorological bureau at 8:00, 14:00 and 20:00 every day.

2, high altitude detection

The high-altitude station is mainly responsible for the detection of high-air image elements in the area. The main use of radio high-altitude detectors, radio high-altitude detectors are disposable products, suspended in the weather balloon rising air, can measure the wind direction, wind speed, temperature, humidity and air pressure at each altitude, released at 7 o'clock every morning and 7 o'clock in the evening, It is necessary to add one at one o'clock in the morning. The radiosonde should be strictly tested before use. When the radiosonde is launched into the air, the l-band radar will automatically track. The radiosonde consists of an inductive component, a conversion circuit, an encoding device, a radio transmitter and a power supply. The value of the meteorological element at each height measured during the ascent of the balloon can be continuously transmitted. The ground receiving equipment performs signal reception, decoding and data processing, which is visually displayed by the computer terminal. We observed the whole process of a high-altitude exploration, observed all the details from the instrument inspection to the balloon explosion and the changes of various meteorological elements, and asked the stationmaster one by one about the problems encountered in the process.

3. Radar station

The radar of xx city is an important member of the national radar network. It is a c-band radar with a diameter of 11.5 meters and is installed on a radar tower of more than 100 meters. The radar can cover an area of ​​250 kilometers and is mainly used to detect precipitation. The duty teacher took us to the radar room. The first thing that caught the eye was the huge cabinet, which was several times larger than the radar of our school. The radar room is equipped with cameras at different angles to observe the operation of the radar at any time. The on-duty teacher also explained to us how the various parts work and how the radar is routinely maintained. Finally, we came to the Radar Data Processing Center, where there are three connections, which are sent to the Municipal Bureau, the Provincial Bureau and the National Bureau. Once the radar has problems, it can be detected in any connection. The attendant teacher also introduced us to the information processing software currently used and let us personally operate it.