Work Summary > Technical Work Summary

Metallurgical personal professional technical work summary

Under the correct leadership of the group company, with the joint efforts of all the staff of the company, our company successfully put into production in April XX. After the production, we grasped the safety with one hand and the technology, realized the safety production in May and June, and reached the design. Production, the technical work of the first half of the year is summarized as follows:
First, attach importance to the opening of the furnace work is the beginning of the life of the blast furnace. The quality of the furnace opening work has a great impact on the normal production of the blast furnace in the future.
Because the blast furnace production is a continuous operation, there is an inseparable connection between the various processes. To ensure the smooth opening of the furnace, all relevant links of the production must be carefully checked, and all preparations must be done carefully. To this end, we focus on the following aspects:
1. The raw fuel preparation cannot be produced due to the sintering machine before the furnace is opened, and the raw material conditions are extremely poor. In order to ensure the normal operation of the furnace, detailed analysis and preparation of the raw materials for the furnace are carried out, and coke, ore, limestone, dolomite, quicklime and white clouds are observed. The blast furnace materials and sintering materials such as stone powder are analyzed and compared in terms of origin, quality, resource status, feeding capacity, quality assurance, etc., and the selection is preferred, combined with local resources, and the use of whole-lived ore is determined. Prove that this choice is correct, although the conditions are difficult, but because we are well prepared and reasonable, it ensures the success of the furnace, the smooth condition of the furnace, and keeps the blast furnace going smoothly in the case of frequent equipment failures.
2, equipment inspection and test run bicycle, linkage, with load linkage, etc., the equipment was inspected, accepted and commissioned.
However, due to the tight time, various problems were not fully exposed during the trial operation. Therefore, after a long period of time after putting into production, there were more equipment problems, which affected the blast furnace production process. Under this circumstance, we have used various operating systems to rationally adjust and strictly enforce the blast furnace, and it has not been affected much, and has withstood the test of various situations.
3. Blast Furnace and Hot Blast Stove This blast furnace and hot blast stove are built in winter and contain more water. In order to ensure smooth furnace opening, a blast furnace and hot blast stove oven scheme has been formulated, and the oven is operated by Tianjin Oven Company. Strictly follow the oven curve oven, and organize three classes of personnel to strictly check and record. Therefore, the oven basically meets the booking requirements.
4. Strengthening the training of operators We have been involved in the metallurgical industry for the first time. The problems of new technology, new personnel and low quality are more prominent. In order to ensure the normal operation of the furnace and the future production, we will continue to strengthen the staff training and encourage employees to learn through the assessment. At the same time, important positions hired a group of experienced technicians to carry on, help, and bring, and achieved remarkable results. After a period of running-in, the level of work and responsibility of the post has been greatly improved. Now it has basically adapted to the needs of production, and has completed the transition from birth to maturity. The next step is to complete the transition from familiar to skillful.
Second, the establishment of various technical management systems to establish a variety of technical management systems with safety technology operating procedures as the core, is a reliable guarantee for normal production. The activities of "study procedures, examination procedures, and procedures" have been extensively and thoroughly carried out in various branches and departments. Everything has procedures to follow, and there are rules to follow, thus taking a lot of detours and cultivating the serious work style of employees.
Third, strengthen employee technical training In order to meet the blast furnace production requirements, we must establish a disciplined and skilled workforce. The company, various branches, and various departments have established various forms of training courses, and have developed various training programs, studied and drilled emergency plans, and deployed long-term plans to create a good software environment for the company's safe production and stable high yield.
Fourth, the establishment of the process as the leader, the blast furnace-centered thought blast furnace production is a large industrial continuous production, each process must be closely coordinated to ensure normal production. To this end, the company emphasizes on process management as the center to strengthen management, and truly “the whole plant is surrounded by blast furnaces, and the blast furnace is turned around the furnace” to tighten the links between various departments and branches and blast furnaces. I want to go to the place to make a whole game of chess.
Fifth, with the standard operation of blast furnace as the core, strengthen the operation management of blast furnace, the blast furnace throughput is large, the amount of raw fuel is large, and the quality change is inevitable, in order to adapt to the objective situation changes. The meticulous operation and strict management of the foreman is very important, in order to make the three classes operate in unison. Therefore, the implementation of standardized operation is a good measure. It enables the foreman to have a goal, the action has a basis, and the inspection has standards, so that the blast furnace condition is always in a state of being able to be controlled, so that the raw material is poor when the furnace is kept. When the raw materials are good, it is necessary to reduce the coke ratio and produce more iron. For the long-term stable and smooth operation of the blast furnace, it has laid a good foundation for high production and low consumption. It has done an analysis of the problems that occurred according to the company's requirements, thoroughly identified the reasons, clarified the responsibilities, found preventive measures, and gradually improved the foreman. Responsibility and the level of operation of the blast furnace.
6. Work plan for the second half of the year 1. Continue to carry out in-depth training for all employees and complete the transition from familiar to skillful.
2. The foreman carries out standardization work, so that all daily work has basis and standards.
3. Under the possible conditions, the foreman implements dynamic management and fully mobilizes the enthusiasm of the foreman.
4. Grasp the assessment and implementation of various technical procedures based on safety technical operating procedures and strengthen basic technology management.
5. Revise the original fuel standard, optimize the original fuel combination, and do the basic work of increasing production and reducing consumption.
6. Actively digest, absorb, and succeed in advanced experience and technical measures to continuously improve various technical indicators.
7. Advocate "doing a line, loving a line, and a line of ones". First, it is a post training. It has the conditions to create a work environment that is enthusiastic about work, positive, and research. It is built with a discipline, high quality, and strong business. A team of workers who can fight.

recommended article

popular articles