Company security personnel duty guidelines

General

Article 1 The company has established this standard for the purpose of enabling security personnel to perform their duties on duty.
The second service of the security personnel is to perform duties on behalf of the company.
The third guard service shall be carried out 24 hours a day, and the service hours of each class shall be announced and implemented by the guards.
The duties of the fourth guard are as follows:
1. Prevention, warning and plant patrols of various accidents in factories and offices.
2. Emergency measures for accidents at factories and offices.
3. Control of foreign guests and employees entering and leaving the factory and office, and contact registration.
4. Control matters for entering and leaving the factory vehicle.
5. Inspection and release of items in and out of the factory.
6. Prevent theft and help maintain the order of the factory and office.
7. Handling of other assignments.
Article 5 In addition to the duties of the preceding article, the guards shall abide by all the provisions of the company, and in particular shall strictly abide by the following rules:
1. It should be absolutely obeyed by the superior order, and the task should be carried out in a practical manner.
2. You should be cautious in your usual duties. When you perform your duties, your attitude and austerity are not too low.
3. In the service, the clothing should be cleaned up, and the emergency and self-defense equipment should be worn frequently, or the reserve should be complete, so that it should be used from time to time.
4. In the service, you should always be alert. In case of major disasters, you should be in danger, be decisive and agile, properly dispose of them, and report to your superiors immediately.
5. Should be strictly guarded in the service, and must not leave the job or drink alcohol, chat, read books, sleep, etc.
6. The location of water, electricity, fuel, switches, door locks and fire-fighting equipment in the factory should be memorized in order to avoid rushing. When there are defects in important intersection lights, doors and windows, fences, etc., it should be recommended. Unit processing.
7. Persons, objects and vehicles should be controlled. Those who do not have the identification certificate or have not completed the procedures for entering the factory will not be allowed to enter the factory. It is absolutely forbidden to bring prohibited products into the factory, except for the dangers or Combustible products should be strictly prohibited to be carried.
8. Patrol the route to patrol the factory on time or irregularly.
9. When exchanging classes, the precautions should be clearly explained, and the important matters or accidents seen in the service, as well as the patrol time, etc., should be listed in the "Guard Log Book", and the relevant materials should be submitted to the factory unit and the security department day by day. Review.

Personnel control

Article 6 Counseling employees to abide by various regulations, and to prevent the occurrence of illegal activities and maintain the order of factories and office premises.
Article 7 does control the attendance card records of employees who go to work, late, early leave, and overtime work.
Article 8 When an employee leaves the factory for business or leave during his service, he shall promptly check the application for public service or the record card for leave, and shall allow him to go out and record the leave of the factory on the public order or on the work card. Read the test.
The authority to approve the public or leave at all levels shall be assigned to the guard room by a list of the factories.
The assistants and above are registered and in and out by the guards.
Article 9 During the working hours, except for official contacts, the guests will be declined.
Article 10: Outsiders who come to the factory to contact the business or visit, and the manufacturer's business, procurement, inspection, installation personnel, etc. should go to the security room to go through the formalities of entering the factory, issue a guest card, and contact the relevant units for reception. Those who are not received by the factory personnel shall not be allowed to enter the factory.
Article 11 The third-party cooperative manufacturers shall be stationed in the factory for a long time, and they may enter and leave the factory with the identification certificate issued by the factory unit.
Article 12 If a holiday overtime worker or a person who needs to enter the factory due to business needs to check the list sent by the factory unit, it shall be allowed to enter the factory. However, the staff of the head of the factory may enter the factory after registration.
Article 13 The company or other factory colleagues may enter the factory after registering with the identification certificate.
Article 14 The accommodation personnel in the factory shall enter and leave the factory with the residence permit in addition to the service hours, but those who do not enter or leave the factory at the specified time at night shall notify the room for supervision.

Item control

Article 15 The release of an item shall be released on the basis of the approved release list.
The release order signed by the guards is ordered and kept in the order by the guard room.
The classification of the released items and the authorized approval personnel shall be sent to the guard room by a list set by each factory.
Article 16 When the co-operators deliver the goods of the other manufacturers' products when they are delivered, they shall be checked and registered by the security guards at the time of entering the factory, and then the security guards shall check the compliance after the original registration.
Article 17 If a person leaving the factory is found by a guard to have a private property or other person's belongings, the item shall be temporarily detained and processed in the following procedure:
1. Record the unit, name, time and location of the carrier.
2. Reasons for the carrier to book the book, indicate the name and quantity, and where to obtain it.
3. When the situation is serious, the party shall not be allowed to leave the factory and shall be reported for processing.
Article 18 When the accommodation personnel in the factory carry people's articles at the factory, they shall be treated as follows:
1. Carrying large items such as luggage, parcels, suitcases, etc., should be released by the release order opened by the housekeeping office.
2. Those who carry general daily necessities will be released by the security guards after inspection.
Article 19 The employees of the Company and ordinary foreign guests are not allowed to bring their cameras into the factory. In case of special circumstances, such as visits, visits or foreigners carrying cameras, they shall be handled as indicated by the supervisor of the factory.
Article 20: If a colleague enters the factory to work, it is not allowed to carry products similar to the company's products. If the factory accommodation personnel need to open the certificate, the factory unit will be allowed to carry it into the factory. However, if you carry the factory, you should use the release list of the items opened by the factory unit, and release it after checking the correctness.

Vehicle control

Article 21 The various types of vehicles of the factory shall be released from the factory by the nuclear unit.
Article 22 Foreign-funded vehicles entering the factory shall be handled in accordance with the following provisions, except for the accompanying personnel in accordance with Articles 10 and 11 of these Standards:
1. Vehicles that have been certified to be delivered or picked up at the factory are allowed to enter the relevant premises in the plant area.
2. The general contact business or visit, as well as the vehicles of the manufacturer's business, procurement, inspection, installation, etc., will be parked in the order according to the specified position. If not specified, the guards should correct it immediately.
Article 23 Vehicles entering the factory of the company or other factories shall be disposed of in accordance with the provisions of Article 22, except for the on-board personnel in accordance with Article 13 of these Standards.
Article 24 Vehicles entering and leaving the factory shall be inspected. When entering the factory, attention shall be paid to the presence or absence of prohibited, dangerous or flammable materials. When the factory vehicles carry the goods, they shall be released after checking the release list.

Emergency handling

Article 25 When a theft is discovered, the theft of the stolen property is the primary priority and should be immediately filed.
Article 26 Security personnel shall be skilled in the use of safety equipment. Understand the location of the configuration, calm down when an emergency occurs, and use the most effective method to minimize the disaster. Do not panic, and dispose of it as follows:
1. If the situation is judged to be eliminated, take action quickly and report to the superior and notify the factory unit.
2. Determine that the accident cannot be ～, and notify the relevant unit at the emergency speed.
3. The director of the daytime disaster emergency report, the night disaster emergency report police station, the fire department or the rescue unit.
Article 27 When a disaster occurs in a neighborhood at night or on a holiday, the relevant supervisor shall be promptly notified of whether the knowledge and judgment have affected the factory.

Supplementary

Article 28 If there are any outstanding matters in this Code, it may be supplemented or amended at any time by order.
Article 29 These Standards shall be implemented after being submitted to the General Manager for approval, and the same shall apply to the amendments.