Workshop management rules and regulations
Workshop Management System 1. In addition to strengthening the management according to the company personnel system, attendance system and production system, the workshop staff must also obey this management system.
2. Before entering the workshop, you must:
1. First, adjust your mentality on the way to the company, organize your own factory clothes, and bring the label to work well.
2. Look at the production tasks in the production arrangement kanban or obey the supervisor to arrange production, and prepare for production.
3, clear the workbench and the items that affect the work around, so that the work is smooth and profitable.
4, go to the warehouse to find the warehouse to take the materials needed for production, and do a good job statistics.
5. Check whether the production tools and production facilities can be produced normally. If they cannot be produced normally, they will be reported to the supervisor immediately, and the supervisor will go to the office to solve the problem; if it is normal, the production will begin.
Third, in the work should be done:
1, can not be sloppy for each process, to ensure the quality of the process, do everything possible to achieve "zero defective."
2. Screws, screw caps, gaskets, cable ties, sleeves, crimping caps, sponge strips, etc. that can be used in assembly can not be thrown as waste. Every employee should have less cost awareness and have to put one The screw gaskets that can be used should be checked for the style used on the product.
3, when posting product labels should be correct, looks more beautiful and regular.
4, each process should be operated in accordance with the operating specifications, to prevent violations of the operation, to ensure good quality.
5. When you install the parts, you should fill in the picking list, and then hand over the picking list to the warehouse tube for signing. After the warehouse tube is signed, follow the warehouse tube and pick it up at the warehouse.
Fourth, after work, you should do:
1. The positioning of production tools and components is kept neat and orderly.
2. Check whether the air batch air pipe leaks and the electrical circuit and switch have hidden dangers; if there is air leakage, report it to the supervisor in time and solve it in time.
3. Clean the workshop according to the cleaning area divided by the main authority, keep the workshop clean and tidy; and distinguish the unused components on the ground, especially screws, gaskets, sponge strips, cable ties, labeling, sleeves, crimping caps. Wait, put it in each location, don't throw it or throw it in the trash.
4. Turn off electricity, turn off water, turn off electrical appliances, and close windows to prevent workshop safety; fire, flood, theft, and loss.
5, neatly and orderly to the punch card machine before punching the card to work.
V. Rules and regulations:
1, the above two, three, four regardless of who is not in accordance with the provisions of the operation or violation of the rules, found a fine of 30 yuan; if three violations in addition to the penalty to give a dismissal.
2. Employees must obey the supervisor's arrangement, and the tasks assigned to each person must be done carefully, and they must not be able to complete the tasks and quality requirements, or impose heavy penalties.
3, the work in the workshop can not say words and swearing that are not related to work, but can not quarrel, fight and fight; offenders: those who have nothing to do with work and swearing are fined 10 yuan each time, quarreling, fighting, whoever, No matter what the reason is 50 yuan, and give a dismissal.
4, can not bring strangers into the factory, if there is a violation of the fine of 30 yuan each time.
5, can not smoke and play a lighter in the workshop, offenders fine of 200 yuan.
6, loading can not be totorola, should follow the arrangement of the dispatcher to load; if there is disobedience, each time a fine of 20 yuan.
7, the return of the disassemble parts and installed parts can not be thrown in the garbage, offenders fine 50 yuan; if the violation is not found, the workshop team unified fine of 5 yuan.
8. If the workshop does not throw the garbage into the garbage shed and throw it outside, the penalty will be 20 yuan; if it is found that the lost, the workshop team will be fined 5 yuan.
Sixth, quality operation system
1. Employees must work in strict accordance with the process quality process, and must not be arbitrarily determined.
2, employees can not cut corners in order to save trouble, can not do what they want to do, must be strictly in accordance with the process of self-inspection, mutual inspection, non-conforming products do not flow to the next process; the next process employees must go up The quality of the process is strictly reviewed. If the quality of the previous process is found, the process should be reworked. If the employee does not listen, the penalty will be 30 yuan. If the employee has three rework in the month, the penalty will be 100 yuan. Supervision and sampling work.
3. If a customer complaint is obtained due to quality problems, and the process is found to be problematic, the employee of this process shall bear all economic losses; the group, the process, the fault of the person shall not be ascertained, and the workshop collectively bears all losses.
2. Before entering the workshop, you must:
1. First, adjust your mentality on the way to the company, organize your own factory clothes, and bring the label to work well.
2. Look at the production tasks in the production arrangement kanban or obey the supervisor to arrange production, and prepare for production.
3, clear the workbench and the items that affect the work around, so that the work is smooth and profitable.
4, go to the warehouse to find the warehouse to take the materials needed for production, and do a good job statistics.
5. Check whether the production tools and production facilities can be produced normally. If they cannot be produced normally, they will be reported to the supervisor immediately, and the supervisor will go to the office to solve the problem; if it is normal, the production will begin.
Third, in the work should be done:
1, can not be sloppy for each process, to ensure the quality of the process, do everything possible to achieve "zero defective."
2. Screws, screw caps, gaskets, cable ties, sleeves, crimping caps, sponge strips, etc. that can be used in assembly can not be thrown as waste. Every employee should have less cost awareness and have to put one The screw gaskets that can be used should be checked for the style used on the product.
3, when posting product labels should be correct, looks more beautiful and regular.
4, each process should be operated in accordance with the operating specifications, to prevent violations of the operation, to ensure good quality.
5. When you install the parts, you should fill in the picking list, and then hand over the picking list to the warehouse tube for signing. After the warehouse tube is signed, follow the warehouse tube and pick it up at the warehouse.
Fourth, after work, you should do:
1. The positioning of production tools and components is kept neat and orderly.
2. Check whether the air batch air pipe leaks and the electrical circuit and switch have hidden dangers; if there is air leakage, report it to the supervisor in time and solve it in time.
3. Clean the workshop according to the cleaning area divided by the main authority, keep the workshop clean and tidy; and distinguish the unused components on the ground, especially screws, gaskets, sponge strips, cable ties, labeling, sleeves, crimping caps. Wait, put it in each location, don't throw it or throw it in the trash.
4. Turn off electricity, turn off water, turn off electrical appliances, and close windows to prevent workshop safety; fire, flood, theft, and loss.
5, neatly and orderly to the punch card machine before punching the card to work.
V. Rules and regulations:
1, the above two, three, four regardless of who is not in accordance with the provisions of the operation or violation of the rules, found a fine of 30 yuan; if three violations in addition to the penalty to give a dismissal.
2. Employees must obey the supervisor's arrangement, and the tasks assigned to each person must be done carefully, and they must not be able to complete the tasks and quality requirements, or impose heavy penalties.
3, the work in the workshop can not say words and swearing that are not related to work, but can not quarrel, fight and fight; offenders: those who have nothing to do with work and swearing are fined 10 yuan each time, quarreling, fighting, whoever, No matter what the reason is 50 yuan, and give a dismissal.
4, can not bring strangers into the factory, if there is a violation of the fine of 30 yuan each time.
5, can not smoke and play a lighter in the workshop, offenders fine of 200 yuan.
6, loading can not be totorola, should follow the arrangement of the dispatcher to load; if there is disobedience, each time a fine of 20 yuan.
7, the return of the disassemble parts and installed parts can not be thrown in the garbage, offenders fine 50 yuan; if the violation is not found, the workshop team unified fine of 5 yuan.
8. If the workshop does not throw the garbage into the garbage shed and throw it outside, the penalty will be 20 yuan; if it is found that the lost, the workshop team will be fined 5 yuan.
Sixth, quality operation system
1. Employees must work in strict accordance with the process quality process, and must not be arbitrarily determined.
2, employees can not cut corners in order to save trouble, can not do what they want to do, must be strictly in accordance with the process of self-inspection, mutual inspection, non-conforming products do not flow to the next process; the next process employees must go up The quality of the process is strictly reviewed. If the quality of the previous process is found, the process should be reworked. If the employee does not listen, the penalty will be 30 yuan. If the employee has three rework in the month, the penalty will be 100 yuan. Supervision and sampling work.
3. If a customer complaint is obtained due to quality problems, and the process is found to be problematic, the employee of this process shall bear all economic losses; the group, the process, the fault of the person shall not be ascertained, and the workshop collectively bears all losses.
recommended article
- Canteen management system
- Power distribution room safety management system
- Party collection system
- Institutional cadre learning system
- Branch fund management system
- Sales Management System Model (A)
- Management method for the use of corporate laptops
- Cafe rules and regulations
- Traffic police brigade service assessment quantification and reward and punishment temporary
- Interim Measures for the Management of Internal Talent Recruitment Markets (
- Various management systems of the company
- Company overtime management system
popular articles
- Villager autonomy charter
- I want to say something to the teacher.
- Company restaurant management regulations
- Strong words
- English famous words
- Taizai’s famous sayings
- Injured sentence
- Classical life motto
- Tao Xingzhi's famous sayings
- Bing Xin’s famous words
- Office director job duties
- Describe the fast time sentence 2019
- The latest high school inspirational maxim
- Kindergarten management system
- Thanks to the friend's words 2019
- College entrance examination inspirational quotes
- File confidentiality system
- Warehouse management system
- Deaf people jingle 2019
- 2014 is very touching words
- Teacher's famous saying
- Administrative measures for non-employed personnel in public institutions
- Korean swear words
- a good saying that loves labor
- School fire safety management system
- Du Yuexi's famous sayings
- The 2019 one-course work system in 2019
- Sad love sentence 2019
- Hotel staff management system
- Qq space mood phrase