Community safety inspection system

Fan Wenyi, a community safety inspection system :

Community Security Inspection System Model 2:

First, the fire safety inspection must adhere to the principle of combining upper and lower, self-examination and random inspection, inspection and rectification, prevent the form of the figure, and go through the scene.
Second, the daily fire safety inspection is the responsibility of the community neighborhood committee security administrator, and there must be inspection records.
Third, the community safety committee fire safety leading group must organize a fire safety inspection every month.
4. Before the holiday holidays prescribed by the state, it is necessary to organize safety inspections, especially the management of major dangerous sources, the parts that have hidden dangers, and the special equipment to strengthen supervision and implement preventive measures.
5. In the case of hidden dangers discovered during the inspection, promptly supervise and exempt hidden dangers; if it is not possible to rectify the situation in a timely manner, implement the responsible person and clarify the time limit for rectification;
6. During the inspection, it is found that there are hidden dangers of major safety accidents; if it is impossible to ensure safety before or during the elimination of major safety accidents, the daily work should be stopped and reported to the Street Security Committee.
7. In the case of safety hazards identified in the safety inspection, the responsible person shall promptly rectify and rectify according to the rectification requirements; where the rectification is ineffective or refuses to rectify and causes the accident to cause losses, it shall be dealt with according to relevant regulations.

Community Safety Inspection System Fan Wensan: Fire Safety

1. Conduct fire safety inspection activities for all units and residents in the community on a regular basis every Friday afternoon.
Second, the fire safety inspection is jointly organized by the community police and the community neighborhood committee, and the community fire prevention and defense squadron personnel participate in the inspection. Every major festival community director should personally participate in fire safety inspection activities.
3. After each inspection, the inspectors shall fill in the fire safety inspection records, and in accordance with the regulations, require the relevant personnel to sign the records and indicate the problems and corrective measures found during the inspection.
4. In the event of a fire hazard found in the inspection, the inspector may fill out the fire hazard rectification notice and request the hidden danger unit to correct the existing fire hazard within a time limit.
5. The notice of rectification of the fire hazard shall be signed by the inspector, and the person responsible for the rectification shall sign the receipt and affix the seal of the inspection unit.
6. The contents of the fire inspection include:
1. The rectification of fire hazards and the implementation of preventive measures;
2. Whether the fire prevention audit, acceptance or inspection procedures of the relevant places and parts before construction or opening are complete;
3. Formulation and implementation of the unit fire safety management system;
4. Firefighting publicity and education and firefighting training for the employees of the unit;
5. Equipment and maintenance of fire extinguishing equipment;
6. Management of gas, fire source and power supply;
7. Implementation of internal fire inspections in the community;
Other content that needs to be checked.

Community Security Inspection System Model Four:

In order to better carry out the safety production inspection work of our community, eliminate the hidden dangers in time, and make the safety production inspection play its due role, and become an important means to ensure safe production, this system is specially formulated.
1. Safety inspections are organized by community organizations and daily inspections by community safety offices. The content and plan of the safety inspection shall be determined by the community safety production inspection and rectification leading group according to the actual situation.
Second, the form of inspection.
1, a small inspection every Monday, a major monthly inspection, usually inspections.
2. Necessary inspections of major festivals, major events and fire-prone seasons.
3. Quickly check the people's reports and complaints for violations of safety production laws and regulations.
4. Supervise and inspect according to the deployment requirements of the relevant departments at the higher level.
5. Special inspection of special rectification of the industry.
6. Implement a system of surprise spot checks and cross-checks.
Third, the main content of the inspection.
1. Whether the business license and the license information are qualified; 2. The establishment and improvement of the safety production rules and regulations; 3. The implementation of the safety production responsibility system; 4. The safety production knowledge education and training; 5. The safety production meeting record materials; Safety production inspection and rectification records; 7. Safety production accident management; 8. Major hazard sources and major accident hazard monitoring measures; 9. Special equipment and facilities report and annual inspection; 10. Safety protection facilities and warning signs.
Fourth, before the safety inspection, we must make a safety checklist and conduct a check-up according to the contents of the table to prevent the passing of the scene.
5. The inspector shall make a written record of the time, place, content, problems found and handling of the inspection, and shall be signed by the inspector and the person in charge of the inspected unit. If the person in charge of the unit under inspection refuses to sign, the inspector shall record it and report it to the community leader.
6. The hidden dangers discovered during the inspection shall be registered item by item, and the rectification instruction shall be issued. The rectification shall be immediately rectified; if the rectification cannot be made in time, the person shall be fixed, the time limit, the fixed measures shall be rectified within a time limit, and the registration shall be registered, archived for future reference. If it is found that there are major safety hazards, it should be reported to the relevant departments of the town government in time.
7. When the unit under inspection receives the rectification instruction, it shall complete the rectification on time according to the rectification requirements proposed in the rectification instruction, and apply to the inspection unit for organization review.
8. The inspection unit shall, after receiving the application for review report from the inspected unit, review the applicant within three days, and issue a review opinion if it passes the review. If it fails, report it to the town government according to the relevant provisions of “Administrative Law Enforcement”. Supervise management to handle.
9. After the safety inspection is over, it is necessary to seriously study and summarize, commend the advanced, and spur the backward, and use this as a basis to arrange the next safe production work.
X. This revision system has been officially implemented since May 1, 2019.

Community Security Inspection System Model Five:

1. Fire-fighting organizations at all levels in the community should regularly organize personnel to go to community units and households to carry out fire safety inspections, eliminate fire hazards in time, and ensure community fire safety.
Second, according to the actual situation, it can take the form of daytime and nighttime, focus and general, assault and daily inspection. It can also carry out special inspections for major festivals, major events and fire-prone seasons, or for weak links in the region.
Third, the units within the community should seriously follow the requirements of the "Fire Safety Management Regulations of Organs, Groups, Enterprises, and Institutions" to conduct fire inspections and fire inspections, and implement fire safety responsibility systems at all levels.
4. Property management enterprises should regularly carry out fire safety inspections focusing on safe evacuation, fire-fighting facilities, fire-fighting equipment, fire, electricity, gas, and oil, and discourage residents from building debris on corridors and walkways to protect residential buildings. Safety.
Fifth, the inspection should be done "three not let go", that is: hidden dangers can not be checked and not let go, rectification measures are not implemented, not let go, not completely rectified hidden dangers.
Sixth, the inspection should make a good record, find that the fire hazard should be immediately stopped, and issue relevant documents such as "fire hazard notice", "fire hazard rectification proposal", "order correction notice" and other relevant documents to the relevant residents or units. If you solve a hidden danger with certain difficulty, you should report it to the police station in time.

Community Safety Inspection System Model 6:

In order to conscientiously implement the safety production responsibility system and do a good job in safety production inspections to effectively reduce safety production hazards, this system has been specially formulated.
First, the community should organize no less than once a month to conduct safety production inspections of the units in the jurisdiction, and record the inspections.
Second, strengthen the prevention of units, facilities and places prone to safety production accidents within the jurisdiction, clarify responsibilities, take measures, and conduct strict inspections.
3. When inspecting the units in the jurisdiction, it is necessary to immediately issue a notice of rectification within a time limit and rectify within a time limit.
4. Before the “New Year's Day”, “Spring Festival”, “Five Days One”, and “National Day” special holidays, the community should seriously organize the safety production inspection of public gathering places, entertainment places, Internet cafes, shopping malls, etc. within the jurisdiction.
5. If any major safety accidents are found in the safety production inspection, the Street Safety Supervision Office shall be reported at the same time when ordering the rectification immediately; the accidents shall be eliminated in time to ensure safety.