Electrical engineer job responsibilities

Part 1: Electrical Engineer Job Responsibilities

1. Design commission: design commission of high and low voltage power engineering, commissioned design of high voltage power distribution, entrusted design of power low voltage system, entrusted design of network communication commissioning design, heat exchange station, pump house, integrated pipe network, etc. The design commission meets the project requirements and meets the requirements of the specification.

2. Drawing review: Responsible for the review of high and low voltage electrical construction drawings, responsible for the review of network communication security construction drawings, strict control of cost, and meeting functional requirements.

3. Engineering change, negotiation, visa review: Responsible for solving all electrical technical problems at the site, coordinating the design of the electrical design changes, assisting the site to determine the detailed process practices, and assisting the construction party to complete the project negotiation program, strictly control the on-site engineering quantity visa, and Strictly review the engineering quantity visa, participate in the drawing review of each project, and be responsible for the review of the meeting.

4. Electrical professional technical support: Responsible for the technical support work of electrical engineering for all projects of the project, answering all electrical and technical problems raised by the site and the company, responsible for issuing solutions for various electrical technical problems, and providing development projects for the company. Electrical engineering technical data and various technical digital indicators are required to guide the progress of electrical engineering quality, and to answer questions and questions about the company's leadership electrical profession.

5. Cooperate with the project bidding: review the construction capacity and qualifications of the electrical construction unit, and cooperate with the tender for the bidding office. Cooperate with equipment bidding: Formulate all technical standards for electrical equipment, and cooperate with the procurement department to complete the procurement bidding for this professional equipment.

6. Performance review and determination of electrical equipment: Determination of performance of high and low voltage electrical materials, selection of all weak electrical equipment, review of the performance of various electrical components of the original design, selection and comparison of performance and cost of electrical components, meeting the design requirements of drawings, and coordination The company determines the grade of electrical equipment and reasonable economic control costs.

7. Formulation and review of electrical schemes: Implement national laws and regulations, issue long-term and near-term planning plans for electric power projects according to project requirements, and organize the implementation of electrical schemes. Responsible for pre-project power load calculation and high-pressure planning. Responsible for the technical review of the electrical part of the construction organization design, responsible for the introduction of various new products and new technology solutions.

8. Engineering construction quality inspection, supervision and acceptance. Responsible for guiding on-site construction management, inspecting and supervising the progress and quality of the project, comprehensively grasping the construction situation, strictly checking the electrical engineering and equipment materials according to the drawings and specifications, proactively discovering problems, guiding the adoption of corrective measures, ensuring the construction period and strictly controlling the construction. quality.


Chapter 2: Electrical Engineer Job Responsibilities

1. It can solve the problems of management, operation and corresponding faults of high and low voltage power distribution equipment and electrical facilities in the factory;

2. Scientific and effective organization and implementation of maintenance and basic upgrading of electrical equipment in the factory;

3. Responsible for the management of the production and living safety of the whole plant, and the training of distribution operators. Responsible for the formulation of electrical operating procedures and safety regulations for wastewater treatment plants;

4. It should have relevant professional backgrounds such as industrial power supply and electricity, electrical self-control, etc., with a bachelor degree or above;

5. It should have more than 5 years of experience in electrical management and maintenance of the factory;

6. Work conscientiously, with team spirit and awareness, good at communication and organization and coordination, and strong hands-on ability.

7. Have good communication skills and teamwork spirit


Chapter 3: Electrical Engineer Job Responsibilities

1. Participate in the preliminary design verification of the project and the review of the construction drawings, mainly to examine whether the electrical design meets the requirements of the project and whether the electrical design is reasonable.

2. Participate in reviewing the construction organization design and construction plan of the construction unit, mainly reviewing the technical quality and construction strength of the construction unit's construction personnel, and whether it can meet the technical and progress requirements of the project.

3. Grasp the quality and progress of the project during the construction process.

A. Manage the quality of construction materials, do not meet the design and inferior products, and resolutely put an end to it.

B. The electrical tube should be checked to check the bending radius of the tube and whether the nozzle is inserted into the box to ensure smooth threading and line change.

C. Wire insulation must meet the requirements of the specification.

1. Participate in the preliminary design verification of the project and the review of the construction drawings, mainly to examine whether the electrical design meets the requirements of the project and whether the electrical design is reasonable.

2. Participate in reviewing the construction organization design and construction plan of the construction unit, mainly reviewing the technical quality and construction strength of the construction unit's construction personnel, and whether it can meet the technical and progress requirements of the project.

3. Grasp the quality and progress of the project during the construction process.

A. Manage the quality of construction materials, do not meet the design and inferior products, and resolutely put an end to it.

B. The electrical tube should be checked to check the bending radius of the tube and whether the nozzle is inserted into the box to ensure smooth threading and line change.

C. Wire insulation must meet the requirements of the specification.

D. When the grounding lightning protection device is installed, the connection between the down conductor and the grounding wire must meet the specification, and the grounding resistance must meet the design requirements.

E. Do a good job in inspection and certification of concealed works.

F. Cooperate with relevant professional engineers.

G. Do a good job in on-site visa work.

H. Grasp the progress of electrical construction.

4, do a good job acceptance inspection work

A. It must be checked and accepted according to the drawings and specifications to ensure the quality of the project.

B. Electrical equipment must meet the design requirements.

D. When the grounding lightning protection device is installed, the connection between the down conductor and the grounding wire must meet the specification, and the grounding resistance must meet the design requirements.

E. Do a good job in inspection and certification of concealed works.

F. Cooperate with relevant professional engineers.

G. Do a good job in on-site visa work.

H. Grasp the progress of electrical construction.

5, do a good job in acceptance inspection

A. It must be checked and accepted according to the drawings and specifications to ensure the quality of the project.

B. Electrical equipment must meet the design requirements.

6, do a good job in after-sales service, and seriously solve the problems raised by customers in a timely manner.

7. Responsible for organizing and guiding the various management offices to improve the housing and municipal water supply and drainage drawings and maintenance files for archiving.

8. Technical supervision and guidance for the normal use of water supply and drainage facilities.

9. Formulate large and medium-sized renovation plans for water supply and drainage facilities, and organize implementation after approval.

10. Technical guidance for maintenance of water supply and drainage facilities.

11. Responsible for formulating and improving the management system related to the safe use of the water supply and drainage facilities, project management, maintenance management and technical data archiving within the company.

12. Responsible for the organization, safety supervision, acceptance and settlement of the professional transformation project under the responsibility of the engineering department.

13. Responsible for guiding the technical management of water supply metering and water conservation, and strive to reduce water supply loss.

14. Responsible for cost control, audit and economic analysis of related projects in this major.

15. Cooperate with the Ministry of Human Resources to organize relevant skills training for this major.

16. Also in charge of pipeline gas engineering tracking and data improvement.

17. Responsible for the external business contacts of relevant professionals and coordinate the relationship with relevant authorities.

18. Assist in the management of related projects and cost control when necessary.

19. Complete other tasks assigned by the company's leadership and department managers.

20. Responsible for the technical work of the pre-intervention, drawing review, quality supervision, acceptance and takeover of the new real estate project.


Chapter 4: Electrical Engineer Job Responsibilities

1. Responsible for the project manager, organize, coordinate and manage the installation and operation team.

2. Responsible for the whole plant load calculation check, the main electrical wiring and the number of main editors

3. Responsible for the “application for electricity use” of the external power grid system and the acceptance and transmission of electricity by the substation, and the signing of the power supply contract.

4. Responsible for the design review of electrical systems, the signing of technical agreements, and the selection of electrical equipment.

5. Responsible for supervision and organization of installation and commissioning of electrical equipment and progress control.

6. Responsible for organizing the acceptance and acceptance of electrical equipment.

7. Responsible for selecting the system operation mode according to the production situation, the basic electricity fee payment method, and conducting electrical cost accounting and control.

8. Responsible for electrical operation management and personnel training

9. Responsible for the preparation of electrical post rules, operating procedures and emergency plans.

10. It can correctly analyze, judge and deal with all kinds of sudden power outage accidents and organize personnel to participate in the emergency plan drill.

11. Organize personnel to do a good job in the safety and inspection of electrical equipment and inspections.

12. Supervise and inspect the electrical personnel to accurately record the meter on time, fill in various operational records, calculate the power, and keep abreast of the system's power consumption status.

13. Responsible for system monitoring and adjustment and operation analysis.

14. Supervise and inspect the electrical personnel to implement the two-vote three system.

15. Check the safety technical measures and equipment maintenance and test work of the electrical inspection and acceptance work.


Chapter 5: Electrical Engineer Job Responsibilities

First, electrical engineers are generally employed by electrical engineering and technical personnel.

2. Responsible for coordinating the project leader to manage the design and construction quality of the lighting, power, fire and related majors of the project department.

3. Responsible for negotiating the construction in progress and using the department and design unit to determine the relevant functions, clarify the design requirements, and cooperate with the project leader to complete the design power of attorney.

Fourth, the relevant professional new technology and new technology will be applied.

Fifth, the quality of the raw materials on the site will be closed, and the project leader will convene the relevant departments to make the price of the price-adjustable materials.

6. Responsible for understanding the situation of the underground and above-ground power grids in the school, collecting relevant information, and cooperating with the archivist to do a good job in the file management of the campus infrastructure.

7. Cooperate with the person in charge of the maintenance project to do the design, construction quality and management of the professional related to the maintenance project.

8. Do a good job in supporting the construction of the new project and the school's main power grid.

IX. Participate in the project planning work, provide relevant information, data and cooperate with the project planning, and close the planning of relevant majors.

Ten, participate in the warranty work of the project.

XI. Complete other tasks assigned by the leadership