Work Summary > Internship Summary

2014 site internship summary


Site internship summary

First of all, the biggest gain of this internship is to learn to adapt to the environment. I never imagined the nine-week internship before I went to the construction site. I can stick to it. But through this internship, I adapted to this kind of site life. Although it is not necessary to go to work on the construction site in the future, but with this period of exercise, no matter what work is done in the future, there is a kind of perseverance that bears hardship and endurance, and also learns to adapt to the environment. In addition, I knew some problems on the construction site that were different from the school. I knew on the construction site how to be a technician and how to communicate with the workers.

Secondly, through this internship, I have gained a deeper understanding of the relevant knowledge of engineering. It should be said that learning more professional knowledge at school is only theoretical, and it is still somewhat different from reality. This internship has some help for my ability to map and map. I know where to pay attention and calculate carefully. Where the structure must consider the safety of the construction, and where to consider the actual construction problems when drawing. It can be constructed and meet the requirements of the specification, and the design and construction standardization can be achieved. Without this internship, perhaps the drawing is just a photocopy of the book, not considering too many problems, and even more likely to think about whether the design can be constructed. Although the construction site is bitter, what can be learned is some practical things. The exercise is the practical ability to solve problems.

In addition, by helping the information staff to fill in some of the information, I have a certain understanding of the construction materials, knowing when to fill in the information, who needs to sign, etc. These are things I have not touched before.

The last point is: In this internship, I saw the piling machine that I only saw in the textbook, and learned about its working procedures and principles.

After the internship, it is necessary to sum up. First, through nine internships, through practice, I have learned a lot of practical knowledge. The so-called practice is the only criterion for testing the truth. Through the side station, I have observed the construction process of the whole road at a close distance, and learned a lot of concrete construction knowledge that is very applicable. This knowledge is often my little contact in school, and I pay little attention to it. But it is a very basic knowledge.

University life is a day of intense and full of expectation. When you are studying leisurely, you always carry your bags, stay away from family, friends, and teachers, and go to the road of your own. However, when we finally can leave the nests of the elders like the eagle feathers that have just been feathered, and walk alone on the big stage of social work, we find that the road to life is so rough and bumpy, anyone’s success is It was a storm. In the internship life of just nine weeks, I learned a lot of things that will help me a lot in my future work. This is the first time in my life that I have entered the society. I am going to work for the first time. I feel that life is really It's not easy.

The internship is essentially a simulation exercise before graduation. It is very important to be on the way to work in the society and to set foot on the job. I hope that life can be extended from this, and that what I have learned is really useful.

Site internship summary

The internship was soon over. During the internship process, under the guidance of the teacher at the internship site, I was puzzled and asked about the professional knowledge that appeared during the internship process. I was eager to ask and learn from them. Through this internship, I was very profitable. I have learned a lot of professional knowledge, and I have learned a lot from the older generation of construction workers.

The internship location is Guangfo MRT 16-label Yangang Station, Yangang Station is located at the intersection of Industrial Avenue and Jiangyan Road, and is located along the southeast of Industrial Avenue. On the station, the Shayuan Road is connected to Shixi Road, and the Yangang Station is set up according to the project. The industrial road planning road is 40 meters wide, with heavy road traffic and dense pipelines. The Yangang station storage line is constructed by mining method to reduce the impact on traffic and pipelines. To meet the construction requirements of the buried tunnel, temporary construction shafts and construction cross-channels are set on the west side of the intersection of Industrial Avenue and Jiangyan Road.

The temporary construction shaft and cross channel of the Yangang station storage line are constructed by mining method and anchor spray support. The shaft clearance is 6000X6000 mm, the depth is 21.938 meters, and the borehole wall is 300 mm thick shotcrete. The construction cross-channel length is 21.879 meters, of which the standard section length is 1.2 and 8.605 meters, the variable section length is 12.074 meters; the standard section clearance is 5000X5000 mm and 5000X11971, the shotcrete is 300 mm thick; the variable section section clearance is 4000X5000 ~11971 mm. The shotcrete is 300 mm thick.

The parking line behind Yangang Station is located at the north side of the intersection of Industrial Avenue and Jiangyan Road. Below the Industrial Avenue, the storage line is located in the left line tunnel of the line. The distance between the line and the left line is 4.05m. The line of the storage line is the same as the right line. The centerline spacing of the tunnel is 8.95m, and the net spacing between the mine tunnel and the shield tunnel is about 2.4m. The total length of the storage line is 169.2m. The standard section has a net width of 9.3m and a net height of 8.5m. In addition to the requirement of the limit of the storage line, the clearance of the standard section must meet the requirements of the shield. The net width of the enlarged section of the shield is 10.5m, the net height is 9.04m, and the clearance needs to meet the turnout. At the machine, the section of the machine is enlarged, the net width is 10.5m, the net height is 9.04m, the thickness of the arch is about 8.4m~9.2m, the storage line is constructed by mining method, and the temporary line is set on the north side of the line. A construction shaft.

In this graduation internship, I also found some shortcomings and shortcomings, mainly the following four points:

First, the mastery of professional knowledge is not comprehensive. Despite the serious study of professional knowledge in the school, the current knowledge is not wide enough, and it is not easy to be qualified for the MRT project. Therefore, although I am going to work in the near future, I should regard the work I do as It is the beginning of a new study. It is only in practice that you will acquire more professional knowledge and skills.

Second, the professional practice experience is far from rich. Due to the low number of professional internships, it is difficult to apply the knowledge learned and practice, and the experience gained through practice is a shortage. Therefore, in the future, we must seize the opportunity to learn from the predecessors who are engaged in water conservancy projects. At the same time, we must change the learning methods and attitudes, change the passive absorption learning methods that rely too much on teachers in the past, and actively take the initiative to learn from others. Ask, while strengthening self-learning ability and mastering the ability to solve problems.

Third, the use of professional knowledge in engineering is not flexible enough. Through this graduation internship, I really feel that the professional knowledge I have learned before is not flexible. This is mainly because the knowledge acquired has not formed a complete system. These scattered knowledge points are difficult to apply. Therefore, in the future, we should pay attention to accumulation and application in learning and practice, so that the knowledge we have learned will change from quantitative to qualitative. Play a greater guiding role.

4. The mastery of the theory is not solid enough. I only know that I didn’t learn well when I was internship. I only had to take care of the exam at school, and I just took a look at the exam. After the exam, it was a blank in my mind, no matter what I want in the future. Whether it is used or not, it disappears in memory. The ability to be familiar with drawings is poor, and the graphic of the plane cannot be imagined in a three-dimensional manner. I don’t know the latest construction specifications, so I can’t quickly judge the right or wrong of the construction. For some The construction sequence is still unclear, and the operation of each construction process is not understood. The theoretical and practical ability is poor, and there is too little understanding of the latest developments in construction.

During the internship, I also deeply realized how to be a person and a speech. First, treat people with sincerity and friendship. Don't be guilty of yin and falsehood, and have a passionate heart to deal with everyone in the society. Second, learn with humility. Whether it is a project manager , construction workers or ordinary workers, we must be open-minded, whether you are humble, calm and meticulous, do not be self-righteous, arrogant. Third, be proactive. Do not be afraid to lose face, do not know to ask, and do not be ashamed to ask, what is in your heart do not hide Kneeling, don't be afraid of mistakes, you must say it. Fourth, the scale and skill of speaking. Speaking should be generous, what kind of person can say what kind of words, light and appropriate, appropriate and reasonable, and take into account multiple parties. To achieve "win-win" Even the purpose of "winning more." Five, meticulous and in-depth. No matter what you do, don't float on the surface, don't just know one, don't know the other, you should be clear about it. Don't understand it, don't understand it. In-depth understanding. Six, establish a lofty goal. We can not just look at the eyes, do not seek development, give yourself a reasonable goal, step by step, practical and enterprising. Do not want to do a day monk hit a Tianzhong. Make plans and strive for it.

This internship is targeted and practical because we did this internship at the school. Through this internship, I have more fully understood the professional knowledge and learning, so as to better master and apply professional skills in future work and study.

First of all, through this cognitive internship, I have a deeper understanding of civil engineering expertise. The content learned during the school is theoretical knowledge, and it is far from enough to learn and apply the theoretical knowledge in practice. Through this internship, I have a correct understanding of the problems and deficiencies in previous studies and internships.

The knowledge of going to school in the previous textbooks is the most basic content in civil engineering. However, with the increasingly standardized and complete construction industry in China and the higher safety requirements of the people for buildings, it is easy to have various problems in engineering. Doubt, how to deal with these problems quickly and correctly? I think, that is to use the knowledge and principles we have learned, find out the "bottleneck" according to the problem, find a breakthrough to solve. In fact, many of these basic knowledge and principles have been learned, but how to connect them to solve practical problems in and, engineering, we need to continue to learn and summarize in practice.

The other side of "learning to use" is "seeing big and small". A lot of knowledge and principles are often the key to solving problems. For example, when we were internship during the last summer vacation, I was puzzled by the basic static pressure pile method and bolt fixing treatment scheme, because static pressure piles have higher economic costs than cast-in-place concrete piles. Therefore, I suspect that the foundation of the project is weak or the sand is serious. I have been affirmed by the project leader. After learning the basic project, I always remember that the instructor told us that if the bearing capacity of the foundation meets the requirements, the static pressure pile should be used as little as possible. The static pressure pile is time-consuming and costly. This is the small reason that allowed me to produce the above. Problems and doubts. Some problems seem complicated, but changing angles or thinking differently may be much simpler. Therefore, in addition to applying what you have learned to engineering, you should also be flexible, proficient in and use of seemingly simple principles and methods. From a small point to a subtle point of view, taking into account the overall situation, you will be able to solve problems better.

Secondly, through this construction internship, I am more aware of the importance of construction management. Whether it is designing or construction or supervision, we should focus on improving construction management efficiency.

MRT project construction management should consider a lot of content, a wide range, and the amount of work tasks to be arranged is larger, but this is directly related to the progress and efficiency of the project. The engineering staff perform their duties, and all the work is carried out in an orderly manner. The workers are busy but orderly on the construction site. The construction workers, safety officers and supervisors are also at the construction site, and the construction work efficiency is improved to the best. The project engineering leader is on the site to guide. Therefore, all work is underway.

Through the introduction of advanced management models and scientific management methods, the construction efficiency has been greatly improved, which is very helpful to the continuity and continuity of construction.

Indeed, after graduating from college to a new job, we are faced with a blank piece of paper, everything is new, and everything is waiting for us to work hard. Therefore, in the face of so many seniors who have been engaged in the MRT project for a long time, their work experience is more abundant than ours. The knowledge is more solid than ours. The knowledge is more profound than ours. We only have the patience to learn from them and learn from them. We will have With greater progress, we will achieve even greater gains in the difficult and challenging work of the MRT project.

During this internship, I learned a lot of things. Not only did I have a lot of learning, but I also learned a lot about how to behave. It has benefited me a lot. As a young person who has just stepped into the society, he does not understand anything and has no social experience. However, with the help of my colleagues, I quickly integrated into this new environment, which is very beneficial for me to enter a new job in the future. In addition, I also learned how to better communicate with others, how to better express my views, and how to persuade others to agree with their own views. I believe that these valuable experiences will be the most important cornerstone of my future success. Internship is an experience that every college graduate must have. It enables us to understand society in practice, let us learn a lot of knowledge that we can't learn at all in the classroom, and open up our horizons and increase our knowledge for us. A good foundation for serving the society has laid a solid foundation. I have learned valuable lessons from countless failures, and my will has been honed over time. I always remind myself that only by continuous efforts can we keep up with the times. In short, the significance of this internship is no longer a task for me to complete credits and complete graduation internships, but to take the first step in the process of opening the door to “life journey”.

Finally, through this construction internship, I have more fully understood the direction of future efforts. In fact, it is really difficult to learn more knowledge and skills in such a short construction internship. However, during these days of construction internships, I have recognized the direction of the work required for future engineering work from a more comprehensive perspective. As the teacher and engineer said during the internship: "Working in civil engineering after graduation requires modesty and learning."

This internship brought me to a lot of things I didn't know and know before. Much of the knowledge was previously unseen in books. Through this internship, I have strengthened my practical ability. I left the book and really came to the construction site to really feel the necessity of the internship. It also made me realize that the basic knowledge is not solid. In terms of construction technology, the actual operation is based on theoretical knowledge, but it is more flexible and operability than theoretical knowledge. This requires learning professional knowledge and actively thinking at work, applying flexibly, and cultivating your own thinking innovation and independence. problem solving skill.

More than ten years of student life is about to end. During the internship of CSC, I understood a lot of things. The adults said that there are always many "characteristics" that have caused headaches for the company's bosses, and now I have finally experienced it. As a student, the main job was to study. Now I am about to set foot on the society. Obviously, my identity has changed, and my natural focus has changed. Now my main task should be gradually transferred from study to work. This internship period is like a transition period – the transition from a student to an office worker is a critical stage. Recalling my work during this period is not satisfactory. I have thought about this, learning experience is naturally a factor, but more importantly, the change of mentality has not been done. Now that I have discovered this shortcoming, it should be fairly timely, because I understand what it means to work. In the days that followed, I will work in this direction, and I believe that I can erase the "features" that should no longer exist. Thanks to the masters for their guidance and teaching during this time, I have benefited a lot from it.

Site internship summary

First of all, the biggest gain of this internship is to learn to adapt to the environment. I never imagined the nine-week internship before I went to the construction site. I can stick to it. But through this internship, I adapted to this kind of site life. Although it is not necessary to go to work on the construction site in the future, but with this period of exercise, no matter what work is done in the future, there is a kind of perseverance that bears hardship and endurance, and also learns to adapt to the environment. In addition, I knew some problems on the construction site that were different from the school. I knew on the construction site how to be a technician and how to communicate with the workers.

Secondly, through this internship, I have gained a deeper understanding of the relevant knowledge of engineering. It should be said that learning more professional knowledge at school is only theoretical, and it is still somewhat different from reality. This internship has some help for my ability to map and map. I know where to pay attention and calculate carefully. Where the structure must consider the safety of the construction, and where to consider the actual construction problems when drawing. It can be constructed and meet the requirements of the specification, and the design and construction standardization can be achieved. Without this internship, perhaps the drawing is just a photocopy of the book, not considering too many problems, and even more likely to think about whether the design can be constructed.

Although the construction site is bitter, what can be learned is some practical things. The exercise is the practical ability to solve problems.

In addition, by helping the information staff to fill in some of the information, I have a certain understanding of the construction materials, knowing when to fill in the information, who needs to sign, etc. These are things I have not touched before.

The last point is: In this internship, I saw the piling machine that I only saw in the textbook, and learned about its working procedures and principles.

After the internship, it is necessary to have a good time. First of all, through nine internships and practice, I have learned a lot of practical knowledge. The so-called practice is the only criterion for testing the truth. Through the side station, I have observed the construction process of the whole road at a close distance, and learned a lot of concrete construction knowledge that is very applicable. This knowledge is often my little contact in school, and I pay little attention to it. But it is a very basic knowledge.

University life is a day of intense and full of expectation. When you are studying leisurely, you always carry your bags, stay away from family, friends, and teachers, and go to the road of your own. However, when we finally can leave the nests of the elders like the eagle feathers that have just been feathered, and walk alone on the big stage of social work, we find that the road to life is so rough and bumpy, anyone’s success is It was a storm.

In the internship life of just nine weeks, I learned a lot of things that will help me a lot in my future work. This is the first time in my life that I have entered the society. I am going to work for the first time. I feel that life is really It's not easy.

The internship is essentially a simulation exercise before graduation. It is very important to be on the way to work in the society and to set foot on the job. I hope that life can be extended from this, and that what I have learned is really useful.

recommended article

popular articles