Design Institute Internship Summary

Design Institute Internship Summary

In the next semester of my senior year, I was fortunate to have an internship in **. In just two weeks, I figured out some problems that I could not understand in my usual study and corrected some wrong opinions. Let me take a deeper look at the difference between theory and practice. Through the advice of the older generation, I understand a series of structural problems that are easy to exist and occur in design and construction. At the same time, through this internship, I have a better combination of theory and practice, and learned more knowledge. Summarizing the gains of these two weeks, it is really big.

On the first day of the internship, the leader arranged a seat for me. I was fortunate enough to be seated next to my instructor. She was very enthusiastic. Whenever I encountered a problem I didn’t understand, she always told me to listen to it. If I didn't understand it, she would change it another way until I understood it. She has always encouraged me: I just entered the company like this, I don't know how normal it is. I don't have to worry about learning slowly. First, I should look at the construction drawings and architectural drawings, and look at the atlas to understand why I want to paint like this and understand the meaning. Secondly, we must practice more computing software such as PKPM. There is still room for SAP2000 and ANSYS to learn. The general structural design is actually not so advanced. First, understand the architectural drawings, and then calculate the structure according to the calculation of the architectural drawings. Only after the construction drawing. After listening to her words, I set a series of plans for my next days: learning AutoCAD, looking at the atlas and specifications, learning pkpm, and designing the structure.

First, learn AutoCAD:

I started with AutoCAD because I think that the design institutes are basically computer design. AutoCAD must be mastered. This requires that the usage and shortcut keys of each tool should be remembered, and the drawing speed will be faster. So, I downloaded some CAD tutorial videos online, and I continued to practice according to the video. Gradually, my drawing speed increased significantly, and I learned to use shortcut keys. However, when I looked at them to draw pictures, I didn't see them tapping any commands. I only heard the keyboard sounds and the mouse clicks of the drip, and the graphics came out very quickly, but I even had their drawing ideas. I haven't seen it yet. And I found that everyone's drawing ideas are different, the same purpose can be achieved through different methods. I reflect: How to be the fastest? They told me that drawing is not only based on the keyboard speed and flexible mouse application, but more importantly, it is determined by drawing ideas. If the idea is wrong, it may make us draw In the process of taking a detour, doing repetitive work, or even useless work, wasted precious time. Therefore, the idea is very important. If you want to master the correct drawing ideas, you must rely on long-term drawing experience to accumulate, think more, and summarize.

Second, look at the atlas and specifications:

Mainly read the "concrete structure construction drawing plane overall representation method drawing rules and structural details cast-in-place concrete frame structure", "concrete structure plane overall representation method drawing rules and structural details cast-in-place concrete slab staircase" two books. After the help of the instructor and my two days of hard research, I finally understood the structural construction drawings. However, it is useless to understand light. Painting is the key. At this time, my colleague installed and explained the explorer software. After a period of practice, I probably understood the entire work program.

Third, learn pkpm:

Next, I started to learn to listen to others saying that pkpm is a fool software, not too difficult, master the process, know the basic principles, can guide the teacher to tell me: Although the software will immediately show the results, but this is a computer, The program has imperfections. The final result is to judge whether it is reasonable and accurate based on the experience of the engineers. It is often necessary to make some modifications. The design cannot rely solely on these softwares. They only play an auxiliary role, only correct. The structural design concept uses the pkpm tool to design the structure. So I embarked on a journey to learn pkpm:

The first step begins with the modeling of pmcad structure. The content includes: 1. The axis line of each layer plane, the plane of each layer line can be the same, or the difference of 2, input column, main beam, hole, oblique column support and other cross-section data, and Arrange these components on the plane grid lines and nodes. 3. Main design parameters of each structural layer, such as floor thickness, concrete strength grade, etc. 4. Input constant and live loads on beams, walls, columns and nodes. Surface load standard layer and floor constant and live cloth load on each layer 6. Modify design parameters 7. According to structural standard layer, load standard layer and each layer height, the overall model is assembled on the floor. 8. Check the model. , found an error and prompted the user. Then there is the detailed layout of the floor of the slab, including: 1. Prefabricated panels in each room. 2. Opening the opening on the floor 3. Modifying and adjusting the thickness of each floor of the room 4. Setting the cast-in-place floor slab 5. Setting the staggered floor of each room 6. Layout of the ring beam of the masonry structure Finally, the load information is generated, including: The constant and live uniform load values ​​of each room are modified and adjusted on each load standard layer. 2. Calculation of floor load conduction, generating forces between beams and walls and beams. 3. Calculation of structural weight. 4. Calculation of the conduction of the constant load to the underlying foundation Finally, the display of various types of loads is checked and printed.

The second step is satwe. I mainly enter the three interfaces of generating satwe data, structural internal force reinforcement calculation, analysis result graphic and text display. In the satwe data, there are a lot of parameters, they are all in accordance with the specification, and different values ​​will have different calculation results, so this step is very important. After the calculation of the internal force reinforcement, the analysis results mainly look at the displacement ratio, the inter-layer displacement ratio, the cycle ratio, the inter-layer stiffness ratio, the inter-layer shear bearing capacity ratio, the stiffness-to-weight ratio, and the shear-to-weight ratio. limits. For example, the displacement ratio should not exceed 1.2, and should not exceed 1.5. If it exceeds, it should consider two-way seismic action; the interlayer displacement ratio should not exceed 1/550; the cycle ratio is the first natural vibration period Tt and translation of the structural torsion. The ratio of the first first natural vibration period T1 is not more than 0.9. If it is not satisfied, the rigidity of the outer ring structure should be strengthened, the seismic wall should be added, the height of the peripheral coupling beam should be increased, and the rigidity of the inner cylinder should be weakened.

The third step is to draw the beam, column, and foundation reinforcement map, mainly to see if the reinforcement ratio meets the requirements. If not, make manual adjustments.

Fourth, the structural design:

After proficient in the above software and specifications, the structural design can be carried out. The general steps of the structural design are as follows:

1. The initial structural plan is generally agreed by the chief architect and the architect.

2. For preliminary design, the structural designer shall arrange the structural dimensions of the main components such as beams, plates and columns according to the preliminary design drawings of the building, and test the calculations in PKPM, and basically reach the specifications of the specifications, and then draw the preliminary design drawings.

3. Make the construction drawing design, build the model in PKPM according to the building drawings provided by the building, arrange the beam-slab column, and start drawing the construction drawing after passing the calculation.

4. Individual places need hand calculations, such as cantilevered gulls, canopy awnings, daughter walls, retaining walls, stairs, etc.

5. Some experience is needed. The experience I understand is that the construction and the familiarity with the specification are particularly important for the flexible application of the licenses specified in the specification. It takes a long time to accumulate, and it will naturally be understood when the engineering is done.

Internship experience:

During my two weeks in the design institute, the deepest experience is that there must be more communication in the design. If you don't understand, you must ask, and ask your colleagues around you humbly! Then look at the norms. Usually, I have to interact with my colleagues in my life. Learning structure design is not only reading, but more importantly, you need to be personal and to go to the field to feel the real space atmosphere. In fact, the whole internship process is a learning process, and will find a lot of things worth learning. Do more, and you will learn more.

Of course, when doing structural design, be careful, bold, and not let go. Careful, for example, every board, every beam, every wall, we should know its role, its force, especially for the irregular structure, the node should be considered more, don't worry. Boldness is a daring assumption. For example, when setting up a beam, we don’t know how high it will meet the requirements at first. Let’s assume a height first, and then check whether it is satisfied. Of course, if you have experience, you can rely on experience. If you have no experience, we can ask the seniors, but I agree that I have more calculations. I don’t let go of it, every component has to be checked. I think that when we first start to structure, we don’t think it’s bad. The experience is not out of thin air. Only when we count more, naturally we have a good heart! Remember Someone told me that to do structure is to rely on normative speech, rely on data to speak, can not take it for granted by their own imagination, after all, we are doing structure, not art.

This internship has enriched my professional knowledge and made me move to a deeper level. It has a certain role in promoting my future in the society, but I also realize that I want to do this work alone. A short internship is not enough, and you need to accumulate little by little in your usual study and work, and continue to enrich your experience. The road is long and the road is long, I will go up and down!

Design Institute Internship Summary II

At the beginning of September, I was led by the boss of the company and came to the Shanghai Post and Telecommunications Design Institute for an internship.

I was placed in the first seat on the left side of the door. It was a very stressful position, and it was "face-to-face" with strangers all the time.

The following is an internship within 1 month.

On the first day of the internship, Xiaogu gave us the first instruction to let us modify the drawings to be published. I thought it was a very simple job. I didn’t expect this to be checked. The mechanical work was always done, we can leave. I think, it’s not the technical content that puts people out of breath, but the numbness of the workload. Therefore, in this month's time, it is basically to modify the published drawings.

A few days later, the first field survey was led by Sukh Brothers, giving us a box concept for field surveys.

The specific steps of the survey can be divided into:

1. Determine the project location and record the surrounding road names

2. Look for the outer manhole cover at the periphery of the project location. Outer manhole cover can be divided into

3. Determine the location of the equipment room within the project, and measure the distance between the machine room and the outer manhole cover. The machine room requires a compartment.

4. If the machine room is newly added, the height of the machine room should be measured. The size of the machine room is preferably 6m2-10m2, less than 15m2, the location of the air conditioner is mounted, and the drainage mode is required.

5. If it is a fixed-line computer room, it is necessary to add equipment to the survey. Generally, new transmission equipment is needed.

6. Take power, you can take 10 kW 280 volts from the distribution box, or the distribution room, can not be attached, independent power supply, and the feeder distance is preferably 120M less than 150M.

7. Confirm the cable transmission mode, microwave, repeater, GPS, fiber optic remote.

8. Cable routing, overhead, pipe jacking, or use of user wells.

A few days later, Ma Xiong and Ni colleagues took me to survey several different types of computer rooms.

1. Existing equipment room, transmission problem

2. New equipment room, equipment placement, door opening direction, power feeder distance problem

3. Public machine room, air conditioning problem, air conditioner external machine mounting problem

4. Macro Station Room Review

In the last few days, Ma brother introduced us to the classification of equipment room equipment, placement, and how to draw drawings. There are several devices in the equipment room.

Transmission equipment

Brand can be divided into Huawei, Nokia

Optical access, microwave

2. Source device

BBU+RRU

2G is BSC, 3G is RNC

The device that amplifies the power of the device is

DEP near-end machine, REP remote machine

3. Power supply equipment

Can be taken from the distribution box or distribution room, 10 kW 280 volts

4. Grounding equipment

5. The air conditioning position is external to the air conditioner, and the air conditioner power specification is 3P or 2P.

6. Cable rack, the distance is 3M

7. Make some necessary holes

After the field survey is over, it is to return to the design drawing of the machine room. Due to the tight time of the internship, the map will be available in the future.

The above is a one-month internship summary at the Shanghai Post and Telecommunications Design Institute.

In general, in just one month, I really learned a lot of things, such as the computer room structure, internal equipment, general regulations, etc., compared to their own company is actually a lot. But then again, there is still a lot to learn.

Design Institute Internship Summary

As a college student who is about to graduate, social practice is an important part of our university life. During my junior summer vacation, I was fortunate enough to go to the Wanxing architectural design internship. During the nearly one month of internship, I first got into contact with some of the architectural design, and I was familiar with the architectural plane, elevation, section, and accumulated some social experience. The person in charge of guiding me is a building structural engineer named Wang. The internship content is mainly the application of AUTOCAD. Under the careful guidance of Wang Gong, I soon became familiar with the various commands of CAD and made my foundation stronger. The technology is more comprehensive and the actual operation ability has improved. The following are some of my internship processes and experiences.

On September 11, the first day of the internship, I was assigned to a large office of the design company with a separate desk and computer. But I don't know what to do, I can't insert anything, just look here, go shopping there, and finally the engineer in the company gave me a way. He told me some simple requirements for me to draw with CAD software. The plan and elevation of a two-story office building finally got something done, so I started to figure it out. To be honest, I used to draw pictures when I was at school. The speed and quality were relatively high, but when I finished it at a very fast speed, Wang Gong pointed out a lot of normative deficiencies, and then he patiently told I designed the process and design specifications for different building types. First of all, it is an understanding of the entire process of the building. The formation and process of the building are as follows: Investor investment--national review and approval--design institute to make architectural plan--winning bid--design institute to carry out architectural design--construction department approval--construction unit construction--supervisor review --Construction completed, delivery - decoration company to carry out renovation - delivery - by investors and real estate companies to buy and sell. Throughout the process, the design part of the building occupies a very important position. Therefore, every step of design should be in accordance with the regulations, and every step should be cautious. There are also processes in the design: do the plan - the plane design - the facade, the section design - hydropower, heating, elevator design.

After a general understanding of these aspects, we did the actual operation - drawing. The program used for drawing is AUTOCAD--computer-aided design. The program has two-dimensional, three-dimensional drawing capabilities. The work I did was a two-dimensional drawing of the building's flat, vertical, and sectioned sections. To draw, you must first understand the function, and then familiarize yourself with the usage of each tool. There are also steps when drawing: axis--wall line--doors and windows--stairs--in-house layout--marking. Also modify while drawing. I just started to draw some simple floor plans and learn to use shortcut keys to make drawings. In the process of drawing, I also encountered some difficulties, such as the intersection of arc and line, the closing of the figure, the drawing of the stairs, and often made mistakes during these times, affecting the next operation. In these operations, you need to be careful and patience to modify.

In the process of learning, the master and colleagues have given me great help, taught me how to use shortcut keys, if you use a few tips in the process of drawing, you can really achieve twice the result with half the effort, let me take less in learning. detour.

Experience:

The first time I went to the company for an internship, when I first came, I was very mentally ill and didn't know how to get along with others. After a few days of internship, I found that it is not difficult to get along with my colleagues. When you encounter a place you don't understand, you have to ask more. When you ask, you will increase your chances of communicating with your colleagues. In this way, not only the problem will be solved, but also the group will be quickly incorporated. Here, we must study hard and ask questions, communicate with others, and treat people with sincerity.

This summer internship brought me more than just a social experience, but also a fortune in my life. What is more gratifying is that I also met some good friends during the internship, and they gave me a lot of help. As the saying goes: I don’t know how to apply the theory to practice. Today’s university education is based on theory. It is a great benefit for me to have the opportunity to enter the design company. I will be quick. I graduated to the society, I believe this internship will help me to work in the future.

Through this internship, I feel that I have gained something in design. The internship is mainly for the purpose of promoting our future work and business improvement, enhancing our future competitiveness and adding a cornerstone to our future foothold. The Wang Gong of the internship unit also gave me a lot of opportunities to participate in their design. I have learned a lot of problems that were difficult to solve before and the problems that I will face in design work in the future. This internship has enriched my knowledge in this area and made me move to a deeper level. It has a certain role in promoting my future in the society, but I also realize that I want to do this work alone. These days' internships are not acceptable. I also need to accumulate little by little in my usual study and work, and continue to enrich my experience. The road ahead of me is still very long, and I need constant efforts and struggle to really go well. I firmly believe that through this internship, I have gained practical experience for my lifelong experience.

After the actual work will be continuously verified, I will continue to understand and appreciate the knowledge I have learned in the internship. In the future work, I will continue to apply the theoretical knowledge and practical experience I have learned to practical work. Come, fully demonstrate the personal and life value of the self. To achieve self-ideal and bright future efforts.

I am grateful to the predecessors for teaching me, and I am grateful to those who have helped me during this period.

In the summer vacation of the second year, I was fortunate to go to the Xi'an Branch of the Shenyang Design Institute. During the nearly two-month internship, I initially touched on some of the operations of architectural design and learned how to draw architectural planes, facades, and profiles. Social experience.

Responsible for guiding me is a building structural engineer named Zhang, and the internship content is mainly the use of AUTOCAD. After careful teaching by Zhanggong, I soon became familiar with the various commands of CAD, and the actual operation ability has also improved. It is some of my internship experience.

First: I treat people sincerely. When I first came to report, I met many new faces. Because I was not familiar with them, I didn’t dare to talk too much to them, and I didn’t understand the work. I didn’t feel very comfortable. Later I was slow. Slowly discovering, as long as you treat people sincerely, humbly ask colleagues, they are also very happy to associate with me. Also teach me some skills, and I deeply feel the importance of sincerity, not only learn how to do things in the company, but also learn how to behave. It is very important to correctly handle the relationship between colleagues. It will be related to whether you can carry out your work. It is not a sign that you have a personality. If you are too high, it is difficult to integrate into the big group.

Second: Don't be lazy. When I first came, I was very motivated. I was drawing pictures every day. After I was proficient, I was somewhat proud and relaxed myself. The Dean specially gave us a meeting, taught us, and relaxed me. It was pulled back again. From now on, I always remind myself that coming here is to practice things, not to play, not because of a self-righteous achievement, it is complacent and arrogant. In the field of study, only diligent learning is a good question.

Third: Diligent study. When I first came to the unit, I was not familiar with many aspects. This requires me to study hard. Because experience is very important for newcomers, but learning things is the most important thing. .

Fourth: pay attention to order. Young people often show impatience when they first arrive at work. This is normal, but it is best not to be quick and quick, and eager to show that they may put themselves at a disadvantage. We must do things with a down-to-earth attitude. The humility point can often get the approval of others. In fact, I find that the seniors are very worth learning. They are very particular about how they do things. They will solve problems step by step instead of panic.

Fifth: Communicate with colleagues. Colleagues have work experience, communicate with them, learn a lot of social experience, and avoid some detours.

This summer internship brings me not only a social experience, but also a fortune in my life. What is more gratifying is that I also met some good friends during the internship, and they gave me a lot of help. As the saying goes: on paper I don’t know how to apply the theory to practice. Today’s university education is based on theory. It is a great benefit for me to have the opportunity to enter the design institute for an internship. I am graduating and moving to the society. I believe this internship will help me in my future work.

Thanks to the Dean for teaching us. Thank you for helping me during this time.

Design Institute Internship Summary

Time has always been inadvertently flying fast, unconsciously, it has been almost a year since I entered the design institute. During this period, with the help of leaders and colleagues, I strongly felt the working atmosphere in the courtyard. Have a certain understanding and understanding of the business purpose and future development.

In the care and care of the leaders and colleagues in the hospital, I realized the joy and moving of growth, and harvested this precious wealth of life with my heart. As a newly graduated university student who has entered the Production Management Division of the Design Institute, I am extremely excited and proud to be able to integrate into this warm collective. As a member of the Production Management Division, the department was found to be a comprehensive and comprehensive department. There are still many places to study.

First, improve speed, pay attention to efficiency:

When the Party A unit gives us a power of attorney, it is necessary to issue a production task book to the design-related departments of this time, and urge them to complete the requirements of Party A in the corresponding time to design. After the design room has bound the text from the graphic center, we will contact the party A to send the text to them for signing.

Second, manage each bound text and contract:

Every time you send a text to Party A, you must keep a copy of it in our hospital. I will classify the texts from different rooms and use them to send them to the archives once a week. I came to manage the contract and the trust of the section chief. I also classify the contract and list the serial numbers. If someone needs to see the contract, it can be approved by the section chief. If you want to take the photocopy contract, I will accompany you.

Third, the tender:

I am slowly learning from the section of the tender, I got the bidding task, the first thing is to carefully look at the requirements that the agency gave us, and let us do what. Then, according to the requirements, prepare the qualification certificate of the director and the staff in the room. The qualification certificate in the hospital also needs the contract within the scope of preparation. The contract is scanned and put into the bidding document, and the bid bond is handed over to the agency. This year, following the lead project of Zhang Ke, the following bidding projects were made: the government procurement project of the site selection plan for the Longshan resettlement house in Nanhu Scenic Area, the construction project of the Yueyang Public Security Bureau and the police training base, and the green design proposal for Dongting Avenue in Yueyang City. Seeking Lunan Lake Tour Survey, bidding and design bidding for the bt project of the resettlement site of Yujiaqiao in Meiyang Township, Yueyanglou District, bidding for the detailed planning of the control plan of Yingtian Town, Quyuan Management District, Yueyang Lake Comprehensive Management Construction Drawing Design Project, Yueyang Survey and design of the first and second tender sections of the road upgrading project and the Changkang Road engineering project. These are the efforts and achievements of our department in this year's bidding.

Fourth, actively participate in various activities in the hospital:

During the "May 4th" Youth Day this year, the inside of the hospital and the bureau went to Pingjiang to hold an outdoor expansion campaign. I also actively participated. With the help of my colleagues, I climbed, climbed the mountain, and walked some wow. The road, the single-wood bridge, and things that have never been tried are completed this time without the task being completed.

V. Actively move closer to the party organization: "Summary Wang-zongjiewang"

As soon as I entered the design institute, I wrote an application for joining the party. I know that it is impossible to be a party member as soon as I enter the unit, nor can I join the party as soon as I enter the unit. But I hope that the party organization can understand that I want to join the party and want to become a party. Party members have an eager mood. I submitted an application for joining the party and strictly requested myself to become a member of the party organization as soon as possible.

Sixth, there is a need to improve existing problems and deficiencies:

In our department, my elders are also my teachers. Every time I finish the confession, there will be a small problem from time to time in the middle. Sometimes the data in the contract will be mistyped or miscalculated. Writing the words inside is not careful enough, and doing things only requires speed without quality. Urgent and seeking.

I have been in the hospital for more than half a year. I have learned and learned some basic work of the design institute. But I have a dream. My dream is my heart. It leads me to struggle, to be successful, to taste success, and to be successful. Always urge yourself to learn more from the leaders and colleagues present here in your future work. Looking back, there is a relaxed environment, hard sweat, and the joy of labor. I always believe that love is the best teacher. In the future work and life, I will love the planning and design career, cherish my work and respect my colleagues.