[Boutique] pharmaceutical factory internship summary

This article directory 1 pharmaceutical factory internship summary 2 pharmaceutical factory internship summary 3 pharmaceutical factory internship summary Article 1: pharmaceutical factory internship summary

In the blink of an eye, it has been a year since I came to Beiyuan. I will sum up this year and strive for more progress.

After the training from the group, I was assigned to the North Dollar Company. Due to the high temperature and high humidity in July, the production cost increased, so the production line of the entire company stopped production, and I was fortunate to be assigned to the marketing department for internship. In marketing, I was internship in the field, and I began to feel that the work in the field was very cumbersome. Fortunately, under the guidance of the masters, I quickly sorted out the work ideas, printed the sales receipts from the K3 system, and then worked with the salesperson’s registration form. Compare, compare the drug variety, specifications, quantity and consignee, then separate the outbound order by rail, motor and mail, and then fill in the various freight orders. Since I have no work experience, I started to work out from the simple and indispensable work of printing out the warehouse receipts, sending faxes, and copying materials. As the work became more skilled, the work became more comfortable and slowly found the joy of work.

In mid-August 2019, with the start of the production line, I came to the production workshop for an internship. I was fortunate enough to be assigned to the 8th floor internship. On the 8th floor, I worked in the bottle washing position, auxiliary position, gland position and packing position. During the internship, I carefully studied SOP, process control points, and operation essentials. SOP requirements for operation. In the process of internship, I encountered problems that I did not understand. I promptly asked the masters for advice. I have never been a college student. I know that my work experience is very small, and the front-line workers have a lot of work experience every day. They have a lot of work worth learning. "Human health is supreme, quality is always first" has indeed penetrated into the hearts of every employee. This spirit deeply touched me. I believe this spirit will continue to pass on me.

I was not a small intern in the fourth floor of the clothes management, where I was responsible for washing and disinfecting the entire company's clothes. In the clothes tube, the masters taught me patiently, the clothes from the washing to the drying and finally to the disinfection, there is not much complexity in the process, and the operation is not so simple. I carefully study every operation method, from the load of the industrial washing machine to the amount of detergent, to the degree of drying of the clothes. Because the clothing management staff was in short supply and the task was heavy, but the masters did not have any complaints and hard work, I was deeply touched, and I adapted to the needs of the work as quickly as possible, and actively cooperated with the masters to complete the task.

In November 2019, I came to the Mechanical Power Department for an internship. The first position of my internship was the production of fitters. The production of fitters maintains a large number of imported equipment on the company's production line, with a wide variety of equipment and complex structural principles. These imported equipment have been used for more than a decade, and the wear and tear situation is serious, and problems often occur. I carefully studied the maintenance and maintenance of the equipment to the fitter master, and went to the scene to observe the operation of the equipment and gradually deepen my understanding. I not only follow the routine inspection and overhaul of the fitter master, but I also often follow the study, constantly learning, and constantly summing up the car. I learned about the working principle of the main equipment such as the bottle washing machine, the filling machine, the capping machine and the labeling machine, and the simple daily maintenance. Slowly, I realized that as long as the daily maintenance of the machine is good, many problems can be avoided. Next, I came to the air-conditioning and air-pressure work internship. In the daily inspections of the masters, I had a certain understanding of the working principle of the air-conditioning unit and the air compressor. The adjustment of the air volume, differential pressure and temperature and humidity was Initial understanding. Because it is winter, the freezer does not work, which brings certain difficulties to the adjustment of temperature. In order to reduce production costs by energy saving and emission reduction, the masters often go to the floors to adjust the switches and valves.

In March 2019, I ushered in a bigger challenge - GMP transformation. For me who just took part in the work, this is the real challenge. From the inspection of construction raw materials to the inspection of the construction process, to the supervision and management of the construction process, to the completion and acceptance of the project, I have started from scratch and never let go of a loophole. This transformation is responsible for the renovation of the water supply and the new construction of the return water pipeline. Due to the construction in the interlayer, this brings great difficulties to the construction. I and the construction personnel work together to study the pipeline direction and slope in the interlayer. Another problem with construction in the mezzanine is safety. Fire protection is critical because of the complex environment and the need for gas cutting. I must communicate well with the construction party, do a good job in safety education, and ensure that the construction is carried out in a safe and orderly manner. Through this transformation, I have not only know the layout of the company's water supply pipeline, but also have a deeper understanding of the actual pipeline of the mezzanine. After the hardware transformation, it is the software upgrade. I strictly complete the sop improvement and revision according to the requirements of the superior. , completed according to the progress. I also need to check and review the records of the power group, and communicate with the team leader in time for the problems in the records to ensure compliance with GMP requirements.

The management of the peripheral fitter group is also a challenge for me. The biggest problem of the peripheral fitter group is that in my opinion, the enthusiasm of the work is poor and the team's cohesiveness is insufficient, and it is not the problem of the individual skill level. At work, Master Liu and I worked hard to mobilize everyone's enthusiasm. Especially in the face of relatively large failures, when you need to collaborate, the division of labor of each group should be as close as possible, and the labor intensity is equivalent. Let everyone not complain to each other and slowly let the team members trust each other. This slowly mobilizes everyone's enthusiasm and brings together the members.

In the year of the internship in North Yuan, I gained a lot. But I know that there are still many deficiencies in the work, especially the lack of ability to connect theory with practice, which makes me feel a lot of pressure in my work. I will seriously internship, constantly enrich myself, and adapt to the needs of work at the fastest speed. And the development of Chinese medicine contributes a force.

Part 2: Summary of the internship of the pharmaceutical factory

Time flies, time is like a shuttle, a six-week internship is over. This internship is both a conceptual baptism and a personal training that has benefited me a lot and has made me more mature.

I am honored to have this opportunity to internship in Changzhou Taikang Pharmaceutical Co., Ltd., thanking the director and colleagues for their guidance and help during this short period of time. I learned the skills from them and learned some experience and the reason for doing things. This is not available in school textbooks. The book is just theory, of course, theoretical knowledge is very important, because many of the internships have been applied more or less. But those targeted experiences are not in the books. They have no reservations. As long as you ask, they will say that it is very rare and precious. I especially cherish the opportunity of this internship and cherish the time of this internship.

Changzhou Taikang Pharmaceutical Co., Ltd. where I am located is located at No. 18, Guoxiang Road, Economic Development Zone, Wujin District, Changzhou City. Our company mainly produces solid preparations, bulk drugs and small volume injections. Solid preparations are mainly tablets and capsules. The API workshop mainly produces low molecular weight heparin sodium and low molecular weight heparin calcium. The small volume injection workshop mainly produces pre-filled needles. My workshop is a small volume injection workshop. The small capacity is simply a small volume of liquid preparation in a vial, vial and pre-filled syringe. The main production in our workshop is a series of pre-filled needles. The medicines in the pre-filled needles are generally expensive or toxic, and some medicines are comparable in price to gold. I still remember that on July 16th, Manager Wang of Shandong Weigao Group came to our company for technical exchange. I learned that pre-filled needles are very common in foreign countries, but they are not universal in China. Therefore, the production of pre-filled needles has a broad development prospect for pharmaceutical companies. The production process of pre-filled needles includes 1. Quality assurance of raw materials 2. Quality assurance of molding process 3. Quality assurance of pin process 4. Quality assurance of cleaning process. Molding concerns: appearance, size, cleanliness, cone, handle, scale, pressure. Pinning process: unwinding → pinning → preheating → point UV glue → two UV curing → needle offset detection → tensile test → loading and dragging. Cleaning process: 1. Washing water is washed three times with purified water, and once with water for washing. 2. Washing water to detect bacterial endotoxin 3. Qualified use.

As our small-volume injection workshop is still under review, all aspects of production are still awaiting approval, so our workshop has not yet been put into production. The important thing for our internship is to practice wearing clean clothes in clean areas, clean the sanitation of each clean area, and receive training from the director.

At the beginning, we spent a certain amount of time every day to practice wearing clean clothes. Some people may say that they don’t wear clothes, why do they practice every day. What I want to say is that there is a set of prescribed movements for wearing clean clothes in the clean area. The wearer must have a good balance of ability. When dressing, make sure that the clean clothes can't touch the ground. Of course, you can't wear clean clothes on the wall or the console. In order not to contaminate the outer surface of the clean clothes. If you wear clean clothes at the AB level, if the clothes are not careful, then the clothes can no longer be worn, and you must wear another one. So we have to be able to touch the ground whenever we wear clean clothes.

Most of the internships are being cleaned. We cleaned the Class AB clean areas over and over again. Of course, we also cleaned the CD-level clean areas. Cleaning in a pharmaceutical factory is not a matter of sweeping and wiping, but must follow certain rules. The director often said that the pharmaceutical company only needs to do two things. First, the second production is cleaning work. Whether it is cleaning AB or CD-level clean areas, the general principle we follow is from top to bottom, from inside to outside, after the first thing, in a certain order, can not be wiped back and forth. Because if you rub back and forth will contaminate the area that was wiped before, it is equal to no rubbing. First, wipe it with purified water. After QC, the QA particle test meets the standard. We started rubbing it all with alcohol, and I was mainly responsible for the preparation of alcohol. We use 75% alcohol to make 75% alcohol, and 75% alcohol sterilization is the most effective. After wiping with alcohol, fumigation of formaldehyde potassium permanganate is carried out. This is followed by the number of microorganisms tested. Continue to disinfect with alcohol after passing the test because the sterilization period is 3 days. After the test is finished, it has to be rubbed again with alcohol. After several times, ozone disinfection was carried out. The link is very tedious, we have to rub it over and over again, but this is a must. The preparations in our workshop are not as final as other workshops, but the sterilization must be strictly controlled during the production process. Therefore, we must ensure that the production environment is sterile. For the clean area, we are the biggest source of pollution. In the clean area, you can't do things that are not related to work, such as shaking your hands and raising your arms to prevent bacteria from being brought into the production process. Even if we wear clean clothes, we can't guarantee sterility. Because the human body is constantly metabolizing, the metabolites are discharged upwards with higher body temperature and are discharged from the neckline. Therefore, it is required to clean the clothes as much as possible and wear eye masks.

The director gave us training in my spare time. The equipment training mainly introduces DMH-1m3 dry heat sterilization cabinet, SW-CJ-2FD type clean workbench, YXQ-MG-202 pulse vacuum sterilization cabinet, mainly the model parameters and structural material operation of the equipment. For these devices, we have already operated when cleaning. Those interface operations, door operations have been very skilled, the operating parameters of the device have been set at the beginning, and the subsequent operations do not need to change the parameters. There are still a lot of training content, there are requirements and steps for people to enter and exit the ABCD clean areas, there are specific steps to wash hands. The training content of the last few days is mainly based on the contents of the quality management regulations for pharmaceutical production, and expands the explanation according to the regulations. A special focus on the GMP appendix. The director training is just like the usual class. The lectures are meticulous and rich in content, which makes us know more about the contents of GMP.

The internship is rich in content. For us who have just stepped into the society, we are no longer the flowers of the greenhouse. We must have a high sense of responsibility for the work and be correct. Some difficulties were encountered during the internship, but they were overcome with the help of the director and colleagues. Of course, I still have a lot of deficiencies, such as incomplete knowledge, equipment operation is basically the first contact, so in the future life study, we can not relax, still have to continue to learn, and constantly improve themselves.

The internship is over, but the road to life has only just begun. I will meet the following challenges with full enthusiasm and aggressive attitude. I believe I will succeed. Go up, boy!

Part 3: Summary of the internship of the pharmaceutical factory

Graduation Internship Graduation Internship is a compulsory course for every undergraduate graduate. It is also a very important compulsory course for life. This short month of internship at the Guyang Group Hengyang Pharmaceutical Factory, I benefited a lot and also prepared for the official entry into the society after graduation. Internship is very important for a fresh graduate. experience.

During the internship, I constantly integrated the book knowledge I learned from the school with the actual situation of the pharmaceutical factory. Through these months of study. I have benefited a lot. Not only has it consolidated the knowledge that he has learned at school. I also learned the knowledge I didn’t understand before.

For this internship, I developed the corresponding internship plan according to the teacher's arrangement. Paying attention to further consolidating and improving the theoretical knowledge learned during the internship stage, in order to achieve the purpose of guiding daily work practice according to theoretical knowledge, and received good results.

This is the first time that we have officially joined the society and set foot on the job, starting a life completely different from the past. Going to work at the prescribed time every day, during work, you must complete your work tasks on time and in a timely manner, and you can't rush to perfuse things. We begin to take civil responsibility on our shoulders, and we must be cautious in everything. Otherwise, we may have to pay a huge price for a small mistake. It is no longer a matter of sorry and a apology.

The pharmaceutical factory is a unit that is very strict with the environment, health and personnel. The main drug produced by Hengyang Pharmaceutical Factory is a large-capacity injection. Workers are required to change clothes and shoes before entering the workshop. In the general production area, work shoes, overalls and hats in the general production area need to be replaced. To enter different levels of clean areas, work shoes/workwear and masks with different cleanliness need to be replaced. Hand disinfection is required. Its main process is: bottle inspection - washing bottles - filling - topping - rolling cover - upper bottle - sterilization - lower bottle - light inspection - packaging.

Internship life, the feeling is very deep, there are many aspects of improvement, but the most important thing for me is the improvement of work ability. The main purpose of the graduation internship is to improve the ability of our recent graduates to work in society, how to use it and how to use it. Give us a chance to learn and practice the various written and practical knowledge, practical operation and exercise.

Since entering the Hengyang Pharmaceutical Factory of Guhan Group, I have been actively and willing to participate in enterprise market research, product tracking, product sales, and understanding of various products of the company. Familiar with the company's branch office, let yourself integrate into the company as quickly as possible, and develop your own strengths. At the same time, I carefully completed the internship diary and wrote the internship report with good results. The feedback from the internship unit shows that during the internship, I have a strong ability to adapt, have certain organizational and communication skills, and can well complete the tasks assigned to me during the internship.

I am very fortunate that I can work and study in such a harmonious atmosphere in such a limited time, share happiness with my colleagues and share the work. So I tried to learn from my colleagues. If I didn't understand, I would like to ask and seriously complete every job that the leaders and colleagues handed over to me. Department leaders and colleagues also tried their best to help me, teach me the knowledge related to the business, patiently answer my doubts and puzzles, and gave me a series of internship plans to help me achieve the purpose of the internship.