Safety emergency plan

Safety work is related to the personal safety of the cadres and workers of the unit. In order to enhance the sense of responsibility and urgency of safety work, and firmly establish the unremitting thoughts, under the leadership of the safety prevention leading group and in combination with the weak links of the safety of the unit, Preventive measures to prevent accidents and develop this plan.
?? First, the emergency plan
?? In the event of a fire, it is necessary to make a timely alarm, quickly cut off the power supply, organize personnel to leave the fire source, power supply, to avoid greater danger.
In the event of a fire emergency, the comrades of the safety leadership team and the fire prevention personnel of each department must be responsible for guiding the safe evacuation of employees and avoiding crowding and shoving. When you flee, cover your mouth and nose with a wet towel, try to squat down your body and evacuate quickly along the evacuation channel. If people are trapped indoors, don't panic. The door should be opened sideways to observe the fire, so as not to hurt the fire. When you are sure that you cannot escape from the door, close the door, use clothing or bedding to close the door, and water the door to delay the fire. Open the window and cry out for help. When the floor is not very high, the bedding can be torn into strips and tied into a rope, tied to the heating pipe, and determined to escape and survive.
?? Quickly organize personnel to carry out self-help work, send people to the designated place or intersection to meet the firefighters.
If there is a fire in the office building, fire extinguishing methods such as fire extinguisher fire extinguishing and fire hydrant fire extinguishing may be adopted according to the substance and location of the fire. If it is a fire on a desk, a sofa, etc., use a dry powder fire extinguisher or a fire hydrant to directly extinguish the fire. If there is a fire in the appliance or the instrument, the power should be cut off first. The ordinary appliance can use a dry powder fire extinguisher to extinguish the fire. The equipment must be extinguished by using a 1211 or carbon dioxide fire extinguisher. Liquid substances such as chemical reagents must not be saved with water and must be extinguished with a fire extinguisher. If there is an electrical fire in the equipment, the power should be cut off, and then the carbon dioxide and 1211 fire extinguishers should be used to extinguish the fire. Do not use a dry powder fire extinguisher to extinguish the fire.
The fire extinguisher is used by unplugging the fire extinguisher, aligning the nozzle with the fire source, and pressing the fire extinguisher switch to extinguish the fire.
?? Second, the relevant rules and regulations for safety and fire prevention
In principle, it is forbidden to use open flames in office buildings. If it is necessary to use open fires due to work, the fire department should fill out the fire certificate. After approval by the office, the fire department will send personnel to the fire site for supervision and inspection, and do a fire fight. Ready to work. Each department shall have 1--3 fire safety officers. Fire safety officers should be proficient in fire prevention, fire fighting knowledge and fire equipment use methods to save the initial fire.
?? The corridors, stairs, exits, etc. in the office building are strictly prohibited to be stacked and kept unobstructed. Evacuation signs and indicators should be guaranteed to be complete and easy to use.
?? cadres and workers should master the use of fire alarm devices and fire-fighting equipment near the working environment. It is forbidden to activate fire alarm devices and fire extinguishing equipment in the absence of fire.
?? Third, the security emergency response team
?? Team leader:
??Deputy head:
?? Team member:
?? Fourth, the safety leadership team responsibilities:
?? In line with the "safety first, prevention-oriented" approach, establish a safe work responsibility system at all levels. Effectively strengthen the fire prevention facilities in vehicles, office buildings and staff quarters, and use electricity, fire and other places to work safely, timely rectify potential safety hazards and loopholes, and ensure the implementation of various safety measures.