Secretarial knowledge > Emergency plan

Fire safety emergency plan


According to the relevant requirements of the public security fire department and the municipal government, combined with the actual situation of Huaxing Building, in order to ensure the normal office order and personal and property safety of the building, once a fire occurs, the guests can be rescued and evacuated in an orderly manner to rescue the property and cause fire damage. The control is at a minimum and this plan is specially formulated. The building's property management center is set up in the fire control room, and the chief commander is the director of the property management center. In the event of a fire, direct fire, organization, and evacuation operations.
First, the fire alarm:
1. Whenever and wherever the building is located, it is the responsibility of the building staff to immediately report to the fire control room.
2. If you encounter a fire in the building, if you are starting a small fire, you should use a portable fire extinguisher to carry out self-rescue fire-fighting, protect the scene, and report the situation. If the fire is serious, immediately press the manual alarm device on the wall to make an alarm, or use an internal telephone to report the alarm. Phone number: Fire control room: x119
3. When calling the police, don't be alarmed. Be calm and calm, clearly clear the area where the fire occurred, the burning substance, the size of the fire, the presence or absence of casualties, the name of the alarm person, the department, and the location to report to the fire control room.
4. Turn off the power, gas switch, doors and windows near the fire.
5. Don't shout "fire", so as not to cause unnecessary confusion, to keep calm, only to be authorized by the fire chief command to report to "119".
Second, the fire confirmed:
1. When the central control room receives the alarm call, it must record the name of the alarm person, the exact location of the fire and the burning substance, the size of the fire, and the number of casualties.
2. The central control room receives a telephone alarm or fire alarm to report the fire. Immediately notify the reserve police officer to confirm at the scene and find out the following problems:
The specific location of the fire, the burning material, the size of the fire, and the number of casualties.
What is the source of fire, whether it is an electrical fire or other reasons.
When confirming the fire, you should pay attention to it. Do not slam the door. Try the temperature of the door first. If it is normal, you can open the door. If the temperature of the door is high, you can confirm that there is a fire inside. If there is someone in the room, you should try to save it first. People, when opening the door, be careful not to put the body right at the door, depending on the situation.
After confirming the fire, immediately report the information to the central control room.
Third, the fire report:
1. After the fire is confirmed, the central control room attendant immediately reports to the insurance manager and the fire chief to report to the duty manager, and sends a warning signal to the security dormitory.
2. Alert the switchboard operator.
3. The switchboard operator will notify the director of the property management center and the department managers immediately after receiving the alarm.
Fourth, personnel actions at all levels:
1. Upon receiving the alarm, the director of the Building Material Management Center rushed to the central control room to set up a fire fighting headquarters to direct fire fighting and rescue evacuation operations.
2. During the abnormal working hours, the duty manager immediately rushed to the scene of the fire to direct the fire fighting operation after receiving the alarm.
3. After all the managers received the alarm, they immediately rushed to the central control room to assist the director of the property management center to direct fire fighting and rescue evacuation operations.
4. After receiving the alarm, the manager of the administrative department of the property management center, the manager of the customer department, and the manager of the engineering department notified the staff of each department to stick to their posts and prepare for evacuation. They immediately rushed to the central control room to form a fire fighting headquarters.
5. Ensure that all firefighting supervisors rush to the scene of the fire immediately after receiving the alarm, and direct the compulsory fire brigade to carry out fire fighting and rescue operations. After all the internal security supervisors received the alarm, they immediately rushed to the main entrance of the building to adjust the deployment of the police force and maintain the order of the main entrance and the periphery.
6. Immediately after receiving the alarm, the captain of the police led the reserve police officers to form a voluntary fire brigade and rushed to the scene of the fire to carry out fire fighting and rescue operations under the command of the fire chief.
7. All other personnel in various departments will stick to their posts after receiving the alarm and act according to the orders of the fire fighting headquarters.
5. Fire fighting tactics:
1. After all fire chiefs arrived at the fire site, they immediately organized on-site personnel to extinguish the fire, and contacted the fire fighting headquarters at any time to report the fire to the fire chief commander.
2. Cooling fire extinguishing method; after the firefighters arrive at the fire, immediately use fire hydrants to extinguish the fire, clean up the flammable materials in the fire, and use the fire hydrants to wet the surrounding buildings and reduce the temperature of the fire.
3. Isolation fire fighting method: Isolation of flammable materials from fire sources.
4. Asphyxiation fire extinguishing method: close the doors and windows, and use a non-combustible material to cover a small area of ​​fire.
5. Suppression of fire extinguishing: use abc dry powder fire extinguisher or carbon dioxide fire extinguisher to extinguish the fire.
6. Fire Fighting Command:
The general fire-fighting command will issue the following order according to the fire scene:
1. Start the fire pump, spray pump, and fire in the fire.
2. Open the exhaust fire damper to activate the exhaust fan to eliminate smoke from the fire.
3. Turn off the central air conditioner and the fresh air system to prevent the fire from spreading.
4. Cut off the power supply in the fire area and lift the elevator to the first floor.
5. Open the positive pressure blower and deliver fresh air to the fire evacuation stairs.
6. Command Engineering to turn off the gas main switch.
7. Release the command to 119.
8. Release the evacuation order.
7. Organizational evacuation:
1. If the person in charge of the on-site fire suppression believes that the fire cannot be controlled, the command immediately makes an evacuation decision.
2. The fire control room opened the fire zone and the fire protection broadcasts on the upper and lower floors. The “Emergency Evacuation Notice” was broadcasted repeatedly by radio. The broadcast is as follows: Customers and friends should pay attention to the fire accident on the xx floor of the building. The firefighters are fighting to save you. Safety, please leave the room quickly, please keep your belongings before evacuation, please do not take the elevator when evacuating, so as to avoid danger, please follow the evacuation direction to go to the fire evacuation channel, thank you for your cooperation.
3. After the fire zone and the upper and lower floors are evacuated, the other floors will be broadcast and evacuated according to the personnel's departure.
4. After receiving the evacuation order, the customer service department will organize personnel to be responsible for the safety diversion work of customers on all floors, and guide the evacuation personnel to take the fire evacuation passage. Remind the evacuated personnel to stay calm, don't panic, don't take the elevator. Prompt evacuation personnel to evacuate to the periphery of the building. After the evacuation of personnel, check whether there is any person in each room, confirm that no one is marked. If someone has not left the room, promptly persuade them to leave the room quickly.
5. The personnel of other departments immediately transfer important materials and files after receiving the evacuation order.
6. After receiving the evacuation order, the internal security supervisor will command the peripheral police officers to clear the motor vehicle lanes and prepare for the guidance of the fire trucks.
Eight, post-processing:
When the fire-fighting commander issues a fire-removal order, the insurance will immediately perform the warning work on the fire site to protect the fire site from damage and ensure the fire accident investigation. The engineering department should immediately put the fire alarm system, automatic fire-fighting system and fire-fighting linkage system. Returning to normal, the Customer Service Department is responsible for the cleanup of the late fire.

recommended article

popular articles